Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
We're sorry, this item is not available.

Garage Sale - 1937-48 Ford Steering Arms, 1-3/4 Inch Drop

Price:
$59.99
PR
Sale Price:
$29.99
Discontinued
Item #:
7022760
Item Details:
Clearance!!
Garage Sale - 1937-48 Ford Steering Arms, 1-3/4 Inch Drop
Click image to enlarge Click image to enlarge
No video at this time.
 

Clearance!!

 NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

These are the steering arms you need to replace your damaged stock arms, or for street rod use where the drop will help you obtain necessary tie rod clearance.

  • Arms have a 1-3/4" drop
  • Heavy cast steel with sufficient radius to clear most spindle bosses
  • Pre-threaded mounting holes
  • Will accept tapered tie rod ends or spherical rod ends

NOTE: This steering arm is to only be used with a spring-over front axle and should not be used with a spring-behind front axle assembly. Flat plate arms are required when using a spring-behind front axle.

Cross Steering Guide (GIF)

 

  1. When using these on a 48” wide axle, you will need a tie rod measuring 46” eye-to-eye.
  2. These steering arms are popular on Model T - 1934 Fords with 4" dropped axles and 4-bar or hairpin radius rod suspensions. These are also suitable to replace damaged stock arms on 1937-1948 Ford spindles.
  • 3-3/8” center-to-center mounting holes
  • Designed to accept 11/16” Ford tapered tie rod ends
  • Dual taper so the tie rod end can come in from either side
  • 2-1/16” offset from mounting surface to center of tie rod hole
  • Tie rod hole can be drilled to 5/8” for use with spherical rod ends
  • Overall length of short arm is approximately 8”
  • Short arm length from front mounting hole to center of tie rod hole is approximately 6-7/8”
  • Overall length of long arm is approximately 9-5/8”
  • Center-to-center of tie rod holes is 1-7/8” on long arm
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
You May Also Be Interested In...
  • (5 Ratings)
    Price: $64.99 - $124.99
    More Info
    1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    x
    							                        

    These 1-3/4" drop forged steel steering arms are popular on Model T - 1934 Fords with 4" dropped axles and four-bar or hairpin radius rod suspensions. Will attach to '37-'48 Ford spindles and accept 11/16" Ford "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

     Steering Arm Ends Guide (GIF)

     Cross Steering Guide (GIF)