Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

GM Metric Caliper Fitting, 10mm - 1.5 to -4 AN, Male Adapter Connector

Specs
Material Type:
Steel
Sold in Quantity:
Each
Finish:
Zinc
Angle:
Straight
Fitting End A:
10mm-1.5
Fitting End B:
-4 AN
Notes
This may be used with GM calipers that have 10mm-1.5 inlet thread if you use with a crush washer.
GM Metric Caliper Fitting, 10mm - 1.5 to -4 AN, Male Adapter Connector
GM Metric Caliper Fitting, 10mm - 1.5 to -4 AN, Male Adapter Connector
GM Metric Caliper Fitting, 10mm - 1.5 to -4 AN, Male Adapter Connector

Click image to enlarge

Details

Reviews (1)

Q & A (1)

What's in the Box

Info

Made from high-quality steel, these bulkhead adapters from Speedway give you an easy way to connect lines through firewalls or frames.

These fittings have AN at one end and 10mm-1.5" on the other end. It can be screwed into a GM metric caliper with 10mm-1.5" threads if you use our crush washers (part number 617-3642). 

Steel Male Adapter Connector Fitting 

  • AN to IFM all steel adapter
  • 10mm - 1.5 to -4 AN

Item Details

AN4 to 10mm-1.5"

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

outlaw28
Verified Purchaser
Russellville, AL, USA

Good product

February 18, 2015
Just the right fitting to connect the flexible steel brake line to GM metric brake calipers.
Pros:
  • Good Fit
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

1 answers

will this fitting fit the wilwood part#70174-750 master cylinder. I have a -4AN line to the throwout bearing and maser cylinder came with a -3AN fitting on it. the hardware store advised me the fitting in the cylinder is metric.

knightrider484
avondale, la.
September 01, 2015

will this fitting fit the wilwood part#70174-750 master cylinder. I have a -4AN line to the throwout bearing and maser cylinder came with a -3AN fitting on it. the hardware store advised me the fitting in the cylinder is metric.

Answers

September 02, 2015
Eric
Expert
If you need to adapt master cylinder 70174-750 to accept a -4AN hose then you can use adapter 6176175. You will need to use the crush washer that was included with the master cylinder to seal that fitting to the master cylinder. The thread in master cylinder 70174-750 is 3/8"-24 and is not metric.
Page 1 of 1

You may also be interested in:

Suggestions For You