Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

GM LS1 Lake Style Header Kit, 1-5/8 Tube, 3-1/2 Inch Cone

SAME DAY SHIPPING!

Specs
Material Type:
Steel
Sold in Quantity:
Set
Finish:
Natural
Tube O.D.:
1.63
Port Height:
1.69
Port Width:
1.69
Flange Thickness:
.31
Flange Style:
Round Port
Collector Diameter :
3.50
Gasket(s) Included:
Yes
Hardware Included:
Yes
Garage Sale:
No
Notes
22" x 3.5" cones. Includes (8) primary tubes, gaskets, hardware, and flanges.

Share by Email

From
To

Click image to enlarge

X

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

Vintage style street rods are hotter than ever, and nothing gives your fenderless rod an authentic dry lakes competition look like a set of lakester headers. These lake style header kits allow you to build your own headers and tailor them to your vehicle. All tubing comes pre-bent. Tapered cones can be trimmed as needed. Lakester header kit includes parts to complete both sides.

  • 5/16" thick flanges
  • 16 ga. pre-bent tubing
  • Collector flanges w/ block-off plates
  • Flanges for connecting an under-car exhaust system (2" O.D.)
  • Gaskets & bolts

Item Details

1-5/8" primaries
30" x 3-1/2" cone

You may also be interested in:

LS1 Block Hugger Tight-Fit Headers, Plain
                        

Many rodders are looking to install Chevy’s powerful and efficient LS1 / LS6 Small Block V8 in their street rods, customs and classic trucks. These shorty headers can make those installations easier in a variety of applications, and help produce more power as well.

An oxygen sensor bung is included with these block hugger headers, but not installed, for those who want to keep the engine’s electronic fuel injection. Includes bolts, gaskets, and reducers.

LS1 Header Dimensions (GIF)

GM LS1 Lake Style Header Kit, 1-5/8 Tube, 4 Inch Cone
                        Vintage style street rods are hotter than ever, and nothing gives your  fenderless rod an authentic dry lakes competition look like a set of  lakester headers. These lake style header kits allow you to build your  own headers and tailor them to your vehicle. Lakester header kit includes  parts to complete both sides.

Includes flange plates, pre-bent tubing, collector plates, block-off plates, gaskets, bolts and flanges for connecting an under-car exhaust system. Small block kits use 1-5/8" primary pipes. All tubing comes pre-bent. The 30" tapered cones can be trimmed as needed.

Lake Style Header Turn-Outs, AHC
                        

Exhaust turn-outs for Speedway Lake Style Headers. Available in plain steel or long-lasting AHC ceramic coated.

Garage Sale - Dynatech® Vortex Insert Cones
                        

Let's face it; open exhaust is a thing of the past! Sound requirements, mandatory mufflers, or maximum db level are found in all forms of racing today. From Mini-Stock to Outlaw Sprint Cars, reducing the sound level is becoming the norm. Today's racers are spending thousands of dollars to go racing. The last thing they want to do is get put on the trailer for too much noise. The Vortex Insert Cone can help you keep on track. That's sound insurance! 

  • 100% T-304 stainless steel construction
  • Compact size fits all racing applications
  • Ultra lightweight - less that 1/2 lb. each
  • Little or no power loss
  • Easy bolt-in installation
  • Insert Cones in 3", 3-1/2", 4", 4-1/2" 
  • Typically good for a 1-3 reduction in db 

Clearance!

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

Tech Line Coatings Black Satin Ceramic Header Coating, 4 Oz.
                        

Tech Line Coatings presents this ceramic header coating that cures with exhaust heat. Black Satin consists of a blend of ceramic powders and high-temp resins that, when properly applied, will withstand exhaust gas temperatures of 2000° F. Black Satin provides a thermal barrier to reduce radiated heat and is corrosion resistant. Fast and simple application. Works on most any surface.

This product is designed to be sprayed on, and it does not require thinners.

Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, White Color
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Extreme Lake Style Header Exhaust Hookup Gasket, 2-1/2 Inch
                        These reusable triple-layer exhaust gaskets are perfect for your Lake style headers with bottom collectors.   They easily conform to surface irregularities  to create a tight, leak-proof seal.  These header gaskets are stainless  steel with a heat-resistant, rubber-based inner core.
  • 2-1/2" diameter
  • For 2 bolt lower outlet on Lakes Headers
  • Reusable triple-layer gasket
  • Stainless steel with a heat-resistant, rubber-based inner core
  • 0.085” thick, ultra pliable
  • Available for many popular flange configurations
  • Easily conforms to surface irregularities to create a tight, leak-proof seal
  • Works well with a wide range of flange surfaces and block and head materials
  • Sold as a pair
Book - How to Build High Performance Chevy LS1-LS6 V8s
                        The LS1/LS6 family of engines are quickly becoming the engine of choice for high performance street and race applications. Learn what it takes to build these engines right in this engine building book. 600 photos. 160 pages. 
                    
Lake Style Header Collector Flange Exhaust Gasket, 3-1/2 Inch
                        Replacement collector end-cap flange exhaust gaskets for Lake Style Headers with either a 3-1/2" diameter cone.
                    
LS1/LS6 Header Gaskets