ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit w/ E-Brake

Free Shipping Free Shipping
Specs
Material Type:
Cast Iron
Sold in Quantity:
Kit
Finish:
Natural
Bolt Pattern:
5 on 4.75"
Hardware Included:
Yes
Rotor Diameter:
11.63
Caliper Pistons:
Single
Rotor Thickness:
.78
Caliper Finish:
Natural
Parking Brake Provision:
Yes
Rotor I.D.:
2.782
Rotor Backspace:
1.75
Rotor Construction:
Vented
Garage Sale:
No
Rotor Location:
Rear
Rotor Shape:
Round
Drilled:
No
Slotted:
No
Notes
Includes rotors, calipers, pads, hardware, and caliper brackets.
GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit w/ E-Brake

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

If you dont want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, weve got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM emergency brake calipers, brake pads and hardware.

  • 5 on 4-3/4" bolt circle
  • Fits over an axle with a maximum flange diameter of 6" O.D.
  • 2.872" rotor center hole
  • Requires the use of 16" wheels as this kit has a minimum 14-5/8" I.D. for caliper clearance 

910-31928 Instructions (PDF)

Item Details

With Emergency Brake Calipers

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

T-Buddy
Verified Purchaser
Sumter sc

Great customer service

May 12, 2015
I'm using this on my 1941 chevy panel delivery truck
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

4 questions : 4 answers

1 answers

what rear rotors does this kit use?

Jace
November 29, 2014

what rear rotors does this kit use?

Answers

December 01, 2014
EricM
This kit uses rotor part number 91031043.
1 answers

Does this kit work with the stock parking brake cables? Do these calipers work with the stock parking brake cables? What does this kit use for brake pad replacements, caliper replacement?

ls2montecarloss
January 08, 2014

Does this kit work with the stock parking brake cables? Do these calipers work with the stock parking brake cables? What does this kit use for brake pad replacements, caliper replacement?

Answers

January 09, 2014
EricM
This kit is primarily for hot rod use but in some cases it has been used to upgrade to disc brakes. If your E-brake cable has the ball on the end where it drops in the arm it may be possible to use as opposed to the cable end that has more of a clevis style. The brake calipers and pads used are derived from a 79 to 85 Cadillac Eldorado rear end.
1 answers

Rear Disc Brakes kit for 1999 S10 Chevy Does this Kit a 1999 S10

73Bill1940
Chesapeake, Va
March 14, 2013

Rear Disc Brakes kit for 1999 S10 Chevy Does this Kit a 1999 S10

Answers

March 14, 2013
Jason
This rear brake kit works on most 7.5 GM rear ends. You can easily verify the compliance by looking at the housing end where it bolts to the backing plate. The normal 10 bolt has 4 bolts that retain the backing plate to the housing flange. This kit is for housing ends with two bolts at the bottom on 2.6875 center to center and ONE bolt way above the housing tube. There is a photo of the axle identification in our catalog for reference. If your housing has 4 bolts retaining the backing plate it will take kit number 91031919 or 31924
1 answers

Does this kit fit the s-10 rear axle?

Bob
Stuart, Florida
August 16, 2012

Does this kit fit the s-10 rear axle?

Answers

August 16, 2012
John
This rear brake kit works on most 7.5 GM rear ends. You can easily verify the compliance by looking at the housing end where it bolts to the backing plate. The normal 10 bolt has 4 bolts that retain the backing plate to the housing flange. This kit is for housing ends with two bolts at the bottom on 2.6875 center to center and ONE bolt way above the housing tube. There is a photo of the axle identification in our catalog for reference. If your housing has 4 bolts retaining the backing plate it will take kit number 91031919 or 31924
Page 1 of 1

You may also be interested in:

Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
(Part #91031933)
                        Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

Steel rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 3" backspace.

NSRA Legal

910-31933 Instructions (PDF)

GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit
(Part #91031923)
                        

If you dont want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, weve got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM metric style calipers, brake pads and hardware.

  • 5 on 4-3/4" bolt circle
  • Fits over an axle with a maximum flange diameter of 6" O.D.
  • 2.872" rotor center hole
  • Requires a minimum 14-5/8" I.D. for caliper clearance 

910-31923 Instructions (PDF)

Item Details

With Non-Emergency Brake Calipers
Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
(Part #49180FU)
                        

Cables are designed for use with Lokar Floor Mount & Under Dash Mount Emergency Hand Brakes. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

See Application tab for model-specific information.

EC80FU E-Brake Cable Instructions (PDF) 

Connector Cable Installation Instructions (PDF) 

Lokar EC-80TU Trans Mount Emergency Brake Cables
(Part #49180TU)
                        

Transmount E-Brake Cables are designed for use with Transmount Emergency Hand Brakes and includes bracket for mounting cables to hand brake. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless steel inner cable resists moisture.

Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit”­.

*NOTE*: If using these cables with Ford Explorer-style (such as our 910-31938), Wilwood, or late model Corvette rear disc brakes with internal shoe-type emergency brake, you will need our nut kit listed 916-41021 and E-Brake clevis 491-81FC.

Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
(Part #91031934)
                        Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

Wilwood aluminum rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 1.94" backspace.

NSRA Legal

910-31934 Instructions (PDF)

DOT Braided Stainless Brake Hoses, GM/Ford, 7/16-20
(Part #6178564)
                        

This line kit would be used to connect from "hard" lines on the rear axle to rear disc calipers when changing from drum to disc brakes. DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

  • Stainless steel braid over Teflon® hose
  • Reduces volumetric expansion of brake lines
  • Reduces brake fade
  • Less susceptible to debris than rubber line
  • Used to connect from hard line on rear axle to rear calipers when changing from drum to disc brakes

Kit includes:

  • (2) 8" stainless steel srake lines w/ 7/16" banjo on one end 
  • (2) 7/16" banjo bolts w/ crush washers
  • (2) 3/8" x 24 IFF apapters to the hard lines
  • (2) frame tabs & clips

Item Details

GM/Ford with 7/16"-20 caliper threads
Wilwood 290-0632 570 Brake Fluid, 12 oz Bottle
(Part #8352900632)
                        

Wilwood's specially formulated Hi-Temp 570° Racing Brake Fluid has a minimum 570 degree dry boiling point to withstand the severe heat requirements of automotive racing. Hi-Temp 570's low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal. 

This high temp brake fluid comes in a convenient 12 ounce container hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications). 

  • Dry Boiling Point:  573° F
  • Wet Boiling Point:  313° F

8352900632 Instructions (PDF)

Red Line 80402 CV-2 Synthetic Grease
(Part #60710002)
                        

Red Line’s team of chemists formulate fully-synthetic lubricants using only the world’s finest base stocks. At Red Line, it’s not designed to be the cheapest – it’s built to be the best. Red Line only uses superior polyester-based products – resulting in lubricants that are extremely stable at high temperatures.

Synthetic CV-2 grease provides excellent water resistance, low temperature flow, and its very high melting point allows it to be used in high temperature wheel bearings, high angle and conventional CV-joints, chassis lubrication and many industrial applications.

  • Outperforms the best conventional or synthetic greases and lubes
  • Excellent high-temp stability, extreme-pressure protection, and water resistance
  • Used in a variety of applications with operating temps from -100°F to 500°F
  • Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
  • Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
  • Synthetic fluidity allows increases in bearing life up to 200%
  • Contains a red moly compound which is a superior lubricant to black moly disulfide lubricants