Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image

GM 10 Bolt Ring and Pinion Instal Kit, 8.5 R&P, 30 Spline

Price:
$74.99
ST
In Stock
Item #:
919831021
Item Details:
30 Spline Pinion
GM 10 Bolt Ring and Pinion Instal Kit, 8.5 R&P, 30 Spline
Click image to enlarge Click image to enlarge
No video at this time.
 
Everything you need for a complete ring and pinion installation job.

Kit Includes:

  • cover gasket
  • crush sleeve
  • marking compound and brush
  • pinion and carrier bearings
  • pinion nut and washer
  • pinion seal
  • thread locking compound
  • sealer

Note: Pinion-depth shims are not included. 

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
You May Also Be Interested In...
  • Price: $14.99
    More Info
    Red Line 58204 Heavy Shockproof Synthetic Gear Oil, 1 Quart
    x
    							                        

    Red Line Shockproof synthetic gear oil is designed for heavily loaded racing and street differentials that see heavy shock loading. It contains a unique solid dispersant that cushions gear teeth to help prevent breakage. Red Line Shockproof gear oil provides the protection of a 75W250 with the fluid thickness properties of a 75W90.

    Ideal for use in sprint, midget, and dirt late model differentials as well as in rear ends using spools or lockers.

    • Fully-synthetic gear oil formula created from polyol ester base stocks offers excellent lubrication under extreme conditions
    • High viscosity-index to provide relatively constant viscosity and film thickness with varying temperature change
    • Ester base stocks and friction modifiers provide additional slipperiness to lower operating temperatures by reducing the sliding friction in hypoid gears
    • Superior shear stability and reduced oxidation compared to other synthetics and conventional gear oil
    • Exceed API GL-5 specifications
    • Engineered to provide the highest degree of protection and improvement of differential efficiency for better mileage, longer drain intervals, and less wear
    • Not recommended for most synchro applications due to the product's extreme slipperiness

  • (2 Ratings)
    Price: $149.99 - $199.99
    More Info
    1970-96 GM 10 Bolt 8 1/2 Inch Ring and Pinion
    x
    							                        

    Many ratios to choose from.

    • 8.50" diameter ring gear
    • 1.625" diameter pinion
    • 10 ring gear bolts
    • 10 cover bolts
    • 30 pinion splines
    • Uses LH thread ring gear bolts - 7/16"-20

    Note: When replacing a stock 2.56 (or numerically lower) ratio, the carrier must also be replaced with a 2.73 or higher ratio's carrier to compensate for the difference in ring gear thickness.

  • Price: $89.99
    More Info
    1970-76 GM 10-Bolt Mini Spool
    x
    							                        

    Works on '70-'76 GM 10-bolt rearends with 8.5" ring gear and 28-spline axles. Economical way for all race cars to "lock" the rearend. Will not work in posi rearends.

    910-48601 Instructions (PDF)

  • Price: $145.99
    More Info
    GM 8.5 Inch 10-Bolt Steel Full Spool, 28-Spline
    x
    							                        

    This is a steel full spool made from 4130 aircraft alloy heat treated steel.

  • Price: $145.99
    More Info
    GM 8.5 Inch 10-Bolt Steel Full Spool, 30-Spline
    x
    							                        

    This is a steel full spool made from 4130 aircraft alloy heat treated steel.