Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

1935-40 Ford Frame X-Member Mount Power Brake Pedal Assembly

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Steel
Sold in Quantity:
Kit
Diameter:
3.33
Feed:
Single
Bolt Hole Pattern:
3.38" x 3.38"
Hardware Included:
Yes
Garage Sale:
No
Notes
Includes pedal, pedal pad and threaded bung.
1935-40 Ford Frame X-Member Mount Power Brake Pedal Assembly
1935-40 Ford Frame X-Member Mount Power Brake Pedal Assembly

Click image to enlarge

Speeday Motors Logo
X
1935-40 Ford Frame X-Member Mount Power Brake Pedal Assembly

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

Use this bracket and pedal to install our brake booster/master cylinder (not included, sold separately) to the left frame rail (boxed or open channel) of your early Ford frame or one without its original "X" member. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad (included) screws onto pedal to finish the installation.

Kit includes zinc plated bracket, pedal, pedal pad and hardware.

Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

You may also be interested in:

1935-1940 Ford Frame Rail Mount Brake Pedal Assembly
                        

This kit adapts our brake booster/master cylinder (not included, sold separately at right) to the left frame rail (boxed or open channel) of a reproduction Early Ford frame or one without it's original crossmember. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad screws onto pedal to finish the installation. 

Pedal assembly kit includes zinc plated bracket, pedal, pedal pad and hardware.

Will NOT work in conjunction with the factory clutch pedal.  Intended for use with an Automatic Transmission. 

Single 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
                        Compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations. 

Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use). 

Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

Wilwood 290-0632 570 Brake Fluid, 12 oz Bottle
                        

Wilwood's specially formulated Hi-Temp 570° Racing Brake Fluid has a minimum 570 degree dry boiling point to withstand the severe heat requirements of automotive racing. Hi-Temp 570's low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal. 

This high temp brake fluid comes in a convenient 12 ounce container hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications). 

  • Dry Boiling Point:  573° F
  • Wet Boiling Point:  313° F

8352900632 Instructions (PDF)