Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Ford Racing M-6566-D351 N351 Head Pushrod Guide Plates

SAME DAY SHIPPING!

Specs
Material Type:
Steel
Sold in Quantity:
Set
Finish:
Black Oxide
Material Thickness:
.13
MFG. Part #:
200-AGP
Garage Sale:
No
Notes
Set of (8).

Share by Email

From
To

Click image to enlarge

X

Please NOTE the following about this product:

  • This item is sold as a set.
  • This product is discontinued.

Details

Reviews

Q & A

What's in the Box

Stepped design for the Ford N351 Sportsman iron heads. Use with mechanical cams, threaded stud, adjustable (non-rail) rocker arms and hardened push rods. May require modification for use with roller rocker arms.

Fits 289/302 with N351 heads.  

You may also be interested in:

Small Block 302 Ford Pushrods, 6 7/8 Inch
                        These heat-treated pushrods are designed to be used on 289/302 Ford  blocks using 302/351W heads. For use with guide plates. 5/16"  diameter.
                    
429/460 Ford Pushrod Guide Plates, 3/8 Inch
                        If your engine has non-adjustable rockers and you are switching to our high performance rockers, you will need to use these guide plates and studs. Machining may be required. 
                    
Isky 200AGP Adjustable Guide Plates, 5/16 Inch Push Rods, Small Block Chevy
                        

These adjustable flat steel guide plates are designed for use on SBC cylinder heads with relocated intake ports.

  • For 5/16" push rods
  • 2-piece adjustable
  • Can be welded after final adjustment
  • For Small Block Chevy V8/V6
  • Sold as a set of 8
Ford N351 Head Pushrods, 289/302 Block, 7.600 Inch
                        

These one-piece chromoly pushrods are designed to be used on 1963-96 289/302 Ford blocks using the Ford Racing SVO "N" head. Hardened and ground for use with guide plates. 5/16" diameter, 7.600" long.

These are for flat tappet or hydraulic camshafts only. DO NOT use with roller camshafts.

Ford N351 Head Rocker Arm Studs
                        

For use with Ford Racing SVO N351 Sportsman iron heads. For use with stud girdles.  

  • 7/16" dia. shoulder
  • Head side threads: 7/16" coarse
  • Rocker side threads: 7/16" fine
  • Mounting length is 1.850"