Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset

Price:$479.99
11" Drum Brake Kit For 9" Ford
Price:
$479.99
KT
In Stock
Item #:
91031937
Item Details:
New Style Big Ford
Open Kit Components
- Selection of individual components may be necessary for kit purchase.
Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
Click image to enlarge Click image to enlarge
No video at this time.
 
We offer these rear drum brake kits for popular 9" Ford rear axles. Each kit has new 11" x 2-1/4" drums, backing plates, shoes, wheel cylinders, springs, emergency brake arm and hardware. 

Fits New style Big Ford housing with 2-1/2" axle offset and 3.15" axle bearing. Drums drilled for 5 on 4-1/2" bolt pattern.

Axle Flange Identification Chart (Link)

  • Fluid Inlet:  3/8"-24 inverted flare
  • Drum Dimensions:  11" x 2.25"
  • Drum Center Pilot Hole:  2.780"
  • Backing Plate Center Pilot Hole:  3.150"
  • Attaching Bolt Holes:  0.381"
  • Attaching Bolt Pattern:  3.56" x 2"
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    (1 Rating)
    Price: $349.99
    More Info
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x 
    							                        
    
                                                        
    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware. 
    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2". 
    Axle Flange Identification Chart (GIF)
    910-31902 Instructions (PDF)
  • Ford 9 Inch Rear Drum Brake Kit, 11 Inch, 2-3/8 Offset
    Ford 9 Inch Rear Drum Brake Kit, 11 Inch, 2-3/8 Offset
    (1 Rating)
    Price: $479.99
    More Info
    Ford 9 Inch Rear Drum Brake Kit, 11 Inch, 2-3/8 Offset
    x 
    							                        
    
                                                        
    We offer these rear drum brake kits for the popular 9" Ford rear axle. Each kit has new 11" drums, 2-1/4" wide brake shoes, backing plates, wheel cylinders, springs, emergency arm and hardware. Fits Old style big Ford housings with 2-3/8" axle offset and 3.15" axle bearing. Drums have 5 on 4-3/4", 5 on 5", and 5 on 5-1/2" bolt patterns.
    • Reconditioned Parts (cleaned and re-plated):
      • backing plate 
      • cable slide
      • adjuster
      • adjuster cap & lever
    • All New Parts:
      • wheel cylinders
      • shoes
      • riveted linings
      • springs
      • hardware 
    Axle Flange Identification Chart (Link)
  • Garage Sale - Ford Racing Rear Disc Kit w/ E-Brake
    Garage Sale - Ford Racing Rear Disc Kit w/ E-Brake
    Price: $439.99
    Sale Price: $399.99
    $40.00 off
    More Info
    Garage Sale - Ford Racing Rear Disc Kit w/ E-Brake
    x 
    							                        
    
                                                        
    Looking for a low cost way to add rear disc brakes to your Ford  8.8" or 9" equipped hot rod, without searching the junk yards? Look no further. This Ford Racing rear disc brake kit includes OE quality single-piston calipers, 11.8" vented rotors, E-coated caliper mounting bracket, and all mounting components. Plus, the E-coated backing plate features an integral parking brake for a convenient install.
    Kit is designed for the late model Ford 8.8" truck and 9" (New Style Big Ford housing with 3.15 bearings, 2.5" offset) rear axles. Will NOT work with Mustang 8.8" axle. 
    Rotors are drilled for 5 on 4-1/2" bolt pattern. See Notes tab for important install info.

    Will Not Work On 15" or 16" Wheels. 
    Axle Flange ID Chart
     
    Clearance!
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS