Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Ford C4 Transmission Drive Shaft Slip Yoke

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

This Ford C-4 driveshaft slip yoke measures 6.5" from the center of the U-joint cup to the front end of the yoke. Fits transmissions with 28 spline tailshafts. Accepts 1310 style U-joints (popular Chevy) with 1-1/16" cups and a spread of 3-7/32".

 

Note: Due to the length of the yoke, it will fit C4 transmissions ONLY, and is not recommended for use on an AOD transmission. The expressed measurement or length of the slip yoke is taken from the center of the u-joint to tip, not overall.

You may also be interested in:

Drive Shaft Safety Loop
                        This driveshaft safety loop holds the drive shaft in place in case of universal joint failure. Made from 2" x 1⁄4" hot rolled steel with grade 5 bolts. Bolt-on installation.
                    
Universal Drive Shaft U-Bolts, 1-1/8 Inch Cap
                        Speedway universal driveshaft U-bolts are forged steel for 50% more strength than standard units. Fits U-joints with 1-1/8" diameter caps.
                    
Speedway Steel Drive Shaft
                        

Lightweight steel driveshaft lengths measured from center of U-joint to center of U-joint. Driveshafts are not dynamically balanced. We recommend dynamically balancing the driveshaft prior to installation. Several lengths are available.

  • Super strong and much lighter
  • 2" O.D. tubing with .083" wall
  • Forged yokes
  • Painted white for high visibility on the track
  • Fits most IMCA modifieds

U-joint # 91048315 works for the front U-joint position on these driveshafts and with the front yokes we sell. Any of the three U-joints listed will work on the rear U-joint location based on rear axle requirement.

Dana Spicer 15-153X Standard Greaseable Cross U-Joint, Chevy 1310 Series
                        

Spicer OEM quality service replacement U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat treated for maximum life. The bearing cups are case hardened for strength and durability. The seals are made from nitrile rubber for optimum grease retention and contaminant exclusion. All of this is why we can say that genuine Spicer parts meet the rigorous Dana standards that have made Spicer the global leader in automotive u-joint technology.

SVL U-Joints are designed and tested to deliver reliable performance and value. When it comes to repairing or maintaining your vehicles, you can rest assured knowing all SVL products are engineered to meet the unique needs of the aftermarket and are backed by Dana Spicer.

  • Standard Cross U-joint
  • 1310 Series
  • 3.219 x 1.062 x 3.219 x 1.062
  • Greaseable w/zerk

 

Dana Spicer 5-1310X Heavy Duty Cross Shaft U-Joint, 1310 Series, Non-Greaseable
                        

Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

  • Heavy Duty U-joint
  • 1310 Series
  • 3.219 x 1.062 to 3.625 x 1.125 
  • Non-Greaseable cross shaft

Premium Performance U-Joint Packs include all of the Spicer Life Series® non-greaseable u-joints for your four-wheel drive truck or Jeep. These u-joint packs are an ideal spare part for use on the trail, so you can make repairs when needed.

Spicer Ultra-Premium Synthetic Grease is specially designed for Spicer U-Joints but is also suitable for all driveline components.

Dana Spicer 5-134X Heavy Duty Conversion U-Joint, Chevy/Ford, 1310 - 1330
                        

Spicer OEM quality service replacement U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat treated for maximum life. The bearing cups are case hardened for strength and durability. The seals are made from nitrile rubber for optimum grease retention and contaminant exclusion. All of this is why we can say that genuine Spicer parts meet the rigorous Dana standards that have made Spicer the global leader in automotive u-joint technology.

SVL U-Joints are designed and tested to deliver reliable performance and value. When it comes to repairing or maintaining your vehicles, you can rest assured knowing all SVL products are engineered to meet the unique needs of the aftermarket and are backed by Dana Spicer.

  • Conversion U-joint
  • Mixed 1310 Series to 1330 Series
  • 3.219 x 1.062 to 3.625 x 1.062
  • Greaseable w/zerk
Dana Spicer 5-3613X U-Joint w/Coated Caps for AlumDriveshaft, 1310 Series
                        

Premium Spicer Life Series® u-joints excel in performance and life. The journal crosses are cold-formed from high quality steel for maximum strength. Non-Greasable u-joints have Ample grease reservoirs in each trunion to assure effective lubrication and are pre-filled with high quality synthetic lithium grease providing superior friction reduction and higher temperature resistance. Spicer Life Series® u-joints use Spicer's highest quality, triple-lip seal along with an external seal guard to resist the harshest conditions. So when you replace your car or truck universal joints with genuine Spicer technology, you can rest assured that you are helping to ensure the maximum life for your vehicle.

Non-Greasable u-joints are stronger than greaseable units since they don't have any grease passages in them.

  • Coated Caps
  • 1310 Series
  • 3.219 x 1.062 
  • For use with Aluminum drive shafts
  • Non-Greaseable cross shaft

Premium Performance U-Joint Packs include all of the Spicer Life Series® non-greaseable u-joints for your four-wheel drive truck or Jeep. These u-joint packs are an ideal spare part for use on the trail, so you can make repairs when needed.

Spicer Ultra-Premium Synthetic Grease is specially designed for Spicer U-Joints but is also suitable for all driveline components.

Dana Spicer 5-460X Greaseable Cross Conversion U-Joint, 1310 to 1350 Series
                        

Spicer OEM quality service replacement U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat treated for maximum life. The bearing cups are case hardened for strength and durability. The seals are made from nitrile rubber for optimum grease retention and contaminant exclusion. All of this is why we can say that genuine Spicer parts meet the rigorous Dana standards that have made Spicer the global leader in automotive u-joint technology.

SVL U-Joints are designed and tested to deliver reliable performance and value. When it comes to repairing or maintaining your vehicles, you can rest assured knowing all SVL products are engineered to meet the unique needs of the aftermarket and are backed by Dana Spicer.

  • Conversion U-joint
  • 1310 Series to 1350 Series
  • 3.219 x 1.062 x 3.625 x 1.188
  • Greaseable w/zerk
1310 Series Chevy to Chevy U-Joint
                        High quality, heat treated forged steel replacement U-joints. Comes with outside retaining clips.
                    
1310 / 1330 Series Chevy to Ford U-Joint
                        

High quality, heat treated forged steel replacement U-joints. This u-joint only works with clips outside the end caps. Clips included. The caps do not have grooves for clips.

1310 / S44 Series Chevy to Ford U-Joint
                        High quality, heat treated forged steel replacement U-joints. The endcaps on the 3-5/8" width side have grooves for "inside clips." There are no grooves on the 3-7/32" width endcaps, therefore that side MUST use external clips. All four clips included.