Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Ford C4 Transmission Drive Shaft Slip Yoke

Price:$59.99
Ford C-4 Transmission Driveshaft Slip Yoke
Price:
$59.99
EA
In Stock
Item #:
80292440
Ford C4 Transmission Drive Shaft Slip Yoke
Click image to enlarge Click image to enlarge
No video at this time.
 

This Ford C-4 driveshaft slip yoke measures 6.5" from the center of the U-joint cup to the front end of the yoke. Fits transmissions with 28 spline tailshafts. Accepts 1310 style U-joints (popular Chevy) with 1-1/16" cups and a spread of 3-7/32".

 

Note: Due to the length of the yoke, it will fit C4 transmissions ONLY, and is not recommended for use on an AOD transmission. The expressed measurement or length of the slip yoke is taken from the center of the u-joint to tip, not overall.

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
U-Joint (Chevy - Chevy)
Price:
$9.99
EA
In Stock
Item #:
91048315
Item Details:
1-1/16" x 3-7/32" x 1-1/16" x 3-7/32"
U-Joint (Chevy - Ford)
Price:
$15.99
EA
In Stock
Item #:
91048316
Item Details:
1-1/16" x 3-5/8" X 1-1/16" x 3-7/32"
U-Joint (Chevy - Ford)
Price:
$19.99
EA
In Stock
Item #:
91048317
Item Details:
S44/1310 Conversion joint
1-1/8" x 3-5/8" by 1-1/16" x 3-7/32"
You May Also Be Interested In...
  • Speedway Steel Drive Shaft
    Speedway Steel Drive Shaft
    (11 Ratings)
    Price: $89.99
    More Info
    Speedway Steel Drive Shaft
    x 
    							                        
    
                                                        
    Lightweight steel driveshaft lengths measured from center of U-joint to center of U-joint. Driveshafts are not dynamically balanced.  We recommend dynamically balancing the driveshaft prior to installation. Several lengths are available.
    • Super strong and much lighter
    • 2" O.D. tubing with .083" wall
    • Forged yokes
    • Painted white for high visibility on the track
    • Fits most IMCA modifieds
    U-joint # 91048315 works for the front U-joint position on these driveshafts and with the front yokes we sell. Any of the three U-joints listed will work on the rear U-joint location based on rear axle requirement.
  • Drive Shaft Safety Loop
    Drive Shaft Safety Loop
    (2 Ratings)
    Price: $29.99
    More Info
    Drive Shaft Safety Loop
    x 
    							                        
    
                                                        This driveshaft safety loop holds the drive shaft in place in case of universal joint failure. Made from 2" x 1⁄4" hot rolled steel with grade 5 bolts. Bolt-on installation.
  • Universal Drive Shaft U-Bolts, 1-1/8 Inch Cap
    Universal Drive Shaft U-Bolts, 1-1/8 Inch Cap
    (4 Ratings)
    Price: $6.99
    More Info
    Universal Drive Shaft U-Bolts, 1-1/8 Inch Cap
    x 
    							                        
    
                                                        Speedway universal driveshaft U-bolts are forged steel for 50% more strength than standard units. Fits U-joints with 1-1/8" diameter caps.