Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Ford C4-Ford C6 Transmission Cushions

SAME DAY SHIPPING!

Specs
Centerline of Holes:
5.625
Material Type:
Steel
Overall Height:
3.00
Overall Width:
2.65
Overall Length:
6.90
Sold in Quantity:
Each
Finish:
Painted
Thread Pitch:
10mm-1.5
Hardware Included:
No
Mounting Bolt Center to Center:
2.8125

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

The studs on the Ford C4 or Ford C6 tranny mount are 10mm x 1.5 thread. It is a standard replacement mount that fits most Fords and is not uncommon, as metric fasteners have been used on domestic vehicles for over 25 years. For Ford C4 and Ford C6 application.

The slots in the crossmember will require a little grinding to use this mount.

Application

  • Ford
    • Country Squire '87-'91
    • LTD '77-91
    • Ranchero '77-'79
    • Thunderbird '77-'79
  • Lincoln
    • Continental '80
    • Mark VI '80-'83
    • Town Car '81-'85
  • Mercury
    • Cougar '77-'79
    • Grand Marquis '79-'91

You may also be interested in:

B&M 70265 Super Cooler Polished Aluminum Transmission Oil Cooler
                        

The last thing you need in the middle of a race or a road trip is to have a transmission or engine go south because your oil cooler can't keep up. B&M's SuperCooler oil coolers will keep your transmission or engine cool and running in your time of need. They're made of lightweight aluminum, with an efficient "stacked plate" design. Multiple cooling paths give them the cooling capacity of larger fan-and-tube coolers. And, because they have a low pressure-drop design, there is less oiling-system restriction.

100% brazed construction provides superior strength and minimum overall size. Stacked fin and plate design is 33% more efficient than the same size tube-and-fin cooler.

Measures 4-1/2" x 11" x 1-1/2" thick with female 1/2 NPT ports.  Cooler efficiency rating of 7,500 BTU.

Lokar ATS6350AN GM TH350 Nostalgia Shifter w/ Free boot
                        

Lokar's Nostalgia Turbo 350 Shifter is designed with 2 bends in the lever and a black mushroom knob for a nostalgic hot rod look. It has 23" lever, Teflon-lined Safety-Lock-Out button, main plate, and side brackets.

For GM Turbo Hydramatic 350 or TH350 automatic transmissions.

TH350 Shifter Installation Instructions 

Free boot with purchase of Nostalgia Shifter!

Aluminum Heatsink Transmission Cooler, 12 Inch
                        

The conductivity of aluminum and added fins make these the best choice for performance and price. Includes hose barb fittings.

  • Compact & efficient size
  • All-aluminum design for maximum heat transfer
  • Easily mounts to most frame rails 
  • Includes two hose nipples to fit 3/8" hose