Products to Compare (max of 3)
Compare These Parts
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Help Center
Help Center
Help Center

U.S.Order Line:


(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:


International Order Line:

Since 1952

Garage Sale - Ford 9 Inch Rear Drum Brake Kit, 11 Inch, 2-3/8 Offset

Free Shipping Free Shipping
Garage Sale - Ford 9 Inch Rear Drum Brake Kit, 11 Inch, 2-3/8 Offset
Garage Sale - Ford 9 Inch Rear Drum Brake Kit, 11 Inch, 2-3/8 Offset
Garage Sale - Ford 9 Inch Rear Drum Brake Kit, 11 Inch, 2-3/8 Offset
Garage Sale - Ford 9 Inch Rear Drum Brake Kit, 11 Inch, 2-3/8 Offset

Click image to enlarge

Please NOTE the following about this product:

  • This product is discontinued.



Q & A

What's in the Box

We offer these rear drum brake kits for the popular 9" Ford rear axle. Each kit has new 11" drums, 2-1/4" wide brake shoes, backing plates, wheel cylinders, springs, emergency arm and hardware. Fits Old style big Ford housings with 2-3/8" axle offset and 3.15" axle bearing. Drums have 5 on 4-3/4", 5 on 5", and 5 on 5-1/2" bolt patterns.

  • Reconditioned Parts (cleaned and re-plated):
    • backing plate 
    • cable slide
    • adjuster
    • adjuster cap & lever
  • All New Parts:
    • wheel cylinders
    • shoes
    • riveted linings
    • springs
    • hardware 

Axle Flange Identification Chart (Link)






  • Drum Center Hole:  2.875" I.D.
  • Drum Overall Width:  3.75" (sitting on bench, from bottom to top at the center)
  • Axle Flange Maximum Diameter:  7.625"

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
1 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star

keysville, ga

Easy to install, fit my 79 camaro perfec

February 17, 2010
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

2 questions : 2 answers

1 answers

will this work on the currie tri five chevy rear end?

Winnipeg, MB, Canada
February 10, 2013

will this work on the currie tri five chevy rear end?


February 12, 2013
The Currie rear end for the Tri-5 such as number 91005557 has the new style housing ends and will not accept the earlier version brakes. The 11” drum brake kit number 91031937 is the one that will bolt directly to the new rear end. We apologize if the bolt pattern is not desirable at the 5 on 4 ½ but the drums could be drilled to the 5 on 4 ¾ if so desired as the axles for the GM applications come with the GM bolt pattern.
1 answers

Can this be used on a 1931 ford front axle, with 31 ford spindles, and bolt on steering arms?

The Ford Man
December 07, 2011

Can this be used on a 1931 ford front axle, with 31 ford spindles, and bolt on steering arms?


December 08, 2011
Speedway part number 91031939. No this will not work on a 31 front spindle, this brake kit is for a 9" Ford rear axle. We do have a drum brake kit for early Ford front spindles, but it needs to be used with the 37-48 style spindles. If you have an original 1931 spindle that is not going to work. I'm not sure what you have, if your spindles have bolt on steering arms they may not be 1931 spindles, those should have integrated steering arms. We could sell you our forged early ford spindles p/n 91032104 and they would work with our drum brake kit p/n 91065420 and 91065400 drums, and 91065450 hubs.
Page 1 of 1

You may also be interested in:

Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
(Part #91031937)
                        We offer these rear drum brake kits for popular 9" Ford rear axles. Each kit has new 11" x 2-1/4" drums, backing plates, shoes, wheel cylinders, springs, emergency brake arm and hardware.  

Fits New style Big Ford housing with 2-1/2" axle offset and 3.15" axle bearing. Drums drilled for 5 on 4-1/2" bolt pattern.

Axle Flange Identification Chart (Link)

Item Details

New Style Big Ford
Ford 9 Inch Bolt-On Rear Disc Brake Kit
(Part #91031902)

If you dont want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, weve got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, 78-88 GM metric style calipers, brake pads and hardware.

  • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
  • For Ford passenger car axles ONLY 
  • Fits axle with maximum flange diameter of 6-1/4" O.D.
  • For 15" and larger wheel applications ONLY

NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

Axle Flange Identification Chart (GIF)

910-31902 Instructions (PDF)

Item Details

With non-emergency brake calipers.
Wilwood 290-0632 570 Brake Fluid, 12 oz Bottle
(Part #8352900632)

Wilwood's specially formulated Hi-Temp 570° Racing Brake Fluid has a minimum 570 degree dry boiling point to withstand the severe heat requirements of automotive racing. Hi-Temp 570's low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal. 

This high temp brake fluid comes in a convenient 12 ounce container hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications). 

  • Dry Boiling Point:  573° F
  • Wet Boiling Point:  313° F

8352900632 Instructions (PDF)

Red Line 80402 CV-2 Synthetic Grease
(Part #60710002)

Red Line’s team of chemists formulate fully-synthetic lubricants using only the world’s finest base stocks. At Red Line, it’s not designed to be the cheapest – it’s built to be the best. Red Line only uses superior polyester-based products – resulting in lubricants that are extremely stable at high temperatures.

Synthetic CV-2 grease provides excellent water resistance, low temperature flow, and its very high melting point allows it to be used in high temperature wheel bearings, high angle and conventional CV-joints, chassis lubrication and many industrial applications.

  • Outperforms the best conventional or synthetic greases and lubes
  • Excellent high-temp stability, extreme-pressure protection, and water resistance
  • Used in a variety of applications with operating temps from -100°F to 500°F
  • Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
  • Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
  • Synthetic fluidity allows increases in bearing life up to 200%
  • Contains a red moly compound which is a superior lubricant to black moly disulfide lubricants