Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Flowmaster 1967-69 Camaro/Firebird Dual Exhaust Kit

SAME DAY SHIPPING! Most orders ship within 24 hours.

Flowmaster 1967-69 Camaro/Firebird Dual Exhaust Kit
Flowmaster 1967-69 Camaro/Firebird Dual Exhaust Kit

Click image to enlarge

Watch the video below to learn more about the Flowmaster Super 40 Series Muffler.

Please NOTE the following about this product:

  • This item is sold as a kit.
  • This product is discontinued.

Details

Reviews

Q & A

What's in the Box

One of the first things you do to improve performance on your 1967-1969 Camaro/Firebird is to upgrade the exhaust. Flowmaster's American Thunder dual exhaust kits will give you the ultimate in performance and sound. Includes aluminized 3" 16-gauge mandrel bent pipes from the crossmember back, H-pipe, Super 40 Series Mufflers and hardware. Ships in two boxes.

  • 1967-1969 Camaro/Firebird V8
  • All 3.00" Tubing From Trans Cross Member Back
  • Includes H-Pipe & Hardware
  • Super 40 Series Mufflers
  • American Thunder
  • Factory Location Exit (Dual pipes out the Rear)

Item Details

1967-69 Camaro/Firebird

You may also be interested in:

Painless 20101 1967-1968 Camaro/Firebird 24 Circuit Wiring Harness
SKU-91020101
                        

One thing to never forget - the wiring in your muscle car is forty years old and updating to modern and safe components is easy. These Painless Wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. Instructions included.

This 24 circuit harness is designed for the 1967 and 1968 Camaro & Firebird. It uses a '69 and newer style bulkhead connector design along with blade fuses and enough circuits to wire up just about any installed upgrade to your 1st generation F-body. Some minor bulkhead modification required. Factory original quick connect terminals are included for the in dash printed circuit board.  Pre-terminated plugs for a column mounted ignition switch, dimmer switch, headlights & headlight switch, blower motor, wiper motor, and turn signal switch. Included with this harness you'll also find a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. 

1967-1968 Camaro/Firebird Wiring Instructions (PDF)

Painless 20102 1969-1974 GM Muscle Car 25 Circuit Wiring Harness
SKU-91020102
                        

One thing to never forget - the wiring in your muscle car is forty years old and updating to modern and safe components is easy. These Painless Wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. Instructions included.

This 25 circuit harness was designed to fit the following 1969-1974 GM muscle cars: Camaro/Firebird, Nova, El Camino, Monte Carlo, Apollo, Chevelle, Cutlass, Skylark, Tempest, and GTO. This harness features a pre-wired factory style bulkhead connector that plugs directly into the back of the fuse block in the factory location. Factory original quick connect terminals are included for the in dash printed circuit board.  Pre-terminated plugs for a column mounted ignition switch, dimmer switch, headlights & headlight switch, blower motor, wiper motor, and turn signal switch. Included with this harness you'll also find a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation.

1969-1974 GM Muscle Car Wiring Instructions (PDF)

Polyurethane Bushing Kit 1967-69 Camaro Multi-Leaf Rear
SKU-91618118
                        

Energy Suspension Master Bushing Sets are the high-tech solution to performance handling and control that O.E.M. manufacturers just don't offer! Energy's complete Master Set both restores worn mounts and bushings as well as adds a dramatically higher degree of performance handling to any vehicle.

  • A real must for competition use, or just for that "seat-of-the-pants" feel
  • Increases vehicle stability and control as well as durability
  • Reduces wheel hop and traction loss
  • Proven by both professional and amateur racers alike
  • Both restores and improves suspension to better than new performance
  • Made of Energy's HYPER-FLEX performance polyurethane
  • Heavy duty metal sleeves and components are used for increased strength

Energy's special HYPER-FLEX polyurethane formula is of a higher durometer (firmness) than rubber materials, which assures long-lasting performance as well as a firm chassis feel.

These Master Bushing Sets offer coverage front to back of the vehicle's chassis.

*Sets do not contain sway bar components, because of the various sizes offered by the vehicle manufacturer.

 

1967-1968 GM Steering Columns
SKU-4461268
                        

These new tilt steering columns are designed to be a bolt-in replacement for 1967-1968 Camaro, Chevelle, GTO, and El Camino applications. They include a wiring harness adapter and accept common 1969-up GM steering wheels or adapters.

We recommend installing a new rag joint. 1"-48 spline.

Ricks Tanks 1081 67-68 Camaro 16 Gallon Carbureted St. Steel Fuel Tank
SKU-6131081
                        Rick's Tanks fuel tanks are hand formed from 304 grade stainless steel and are a direct replacement for your original Camaro gas tank. Ricks Tanks feature a unique interal baffling system not found in O.E. tanks to  control fuel tank slosh. The baffling runs from front to rear, side to side, and  surrounds the fuel pickup to eliminate fuel starvation during acceleration and  hard braking. All fittings and flanges are also CNC turned 304 stainless steel to ensure a proper seal. 

Carb type tanks have a 3/8" NPT top feed outlet fitting and a 1/4" NPT vent fitting. Each tank comes with stainless mounting straps and hardware, and all tanks have a brushed finish for easy up-keep.
Ricks Tanks 1091 1969 Camaro 16 Gal. Carbureted St. Steel Fuel Tank
SKU-6131091
                        Rick's Tanks fuel tanks are hand formed from 304 grade stainless steel and are a direct replacement for your original Camaro gas tank. Ricks Tanks feature a unique interal baffling system not found in O.E. tanks to  control fuel tank slosh. The baffling runs from front to rear, side to side, and  surrounds the fuel pickup to eliminate fuel starvation during acceleration and  hard braking. All fittings and flanges are also CNC turned 304 stainless steel to ensure a proper seal. 

Carb type tanks have a 3/8" NPT top feed outlet fitting and a 1/4" NPT vent fitting. Each tank comes with stainless mounting straps and hardware, and all tanks have a brushed finish for easy up-keep.
Global West CTA-79A 1967-69 Camaro/Firebird Tubular Upper Control Arms
SKU-91034280
                        

Global West's control arms are built for a specific purpose, to bring current technoloty to early model applications. Their tubular lower arms are perfect for stock or performance suspension upgrades. Both arms are supplied with ball joints, bump stops, control arms bushings, and a innovative rotating spring cushion. 

The cushion serves two purposes-to isolate and properly index the coil spring. Even if you trim your coil spring in order to lower the car, the lower spring cushion simply rotates for proper re-index. The control arms also provide additional header tube clearance, require no frame modifications and are pre-assembled for your convenience.

  • No frame modifications required
  • Direct replacement for stock upper control arms
  • Built-in 6 degrees of positive caster provides straight line stability
  • Caster also improves corner entry do to new camber curve
  • Upper arms reduce factory bump steer by cutting it in half
  • Beneficial for drag, street, and road racing applications
  • Stock ball joints are used
  • Fully assembled with billet shafts, Del-A-Lum bushings, ball joints, and bump stops
  • Tubular arms are powder coated black
  • Provisions for adjustable bump stops (drag racing)
  • New alignment specifications are included in every kit
  • Control arms can be used with lowered frame holes
  • Upper arms will work with coilover kits

Note: Will not work with Heidt's spindles but will work with stock or 2" dropped spindles that measure 7" across the ball joint area.  

Global West CTA-79L 1967-69 Camaro/Firebird Lower Tubular Control Arms
SKU-91034283
                        

Global West's control arms are built for a specific purpose, to bring current technoloty to early model applications. Their tubular lower arms are perfect for stock or performance suspension upgrades. Both arms are supplied with ball joints, bump stops, control arms bushings, and a innovative rotating spring cushion. 

The cushion serves two purposes-to isolate and properly index the coil spring. Even if you trim your coil spring in order to lower the car, the lower spring cushion simply rotates for proper re-index. The control arms also provide additional header tube clearance, require no frame modifications and are pre-assembled for your convenience. 

Will not work with Heidt's spindles but will work with stock or 2" dropped spindles that measure 7" across the ball joint area. 

Dynatech Muscle Maxx 1967-69 Camaro Stainless Dual Exhaust, 3 Inch
SKU-31179391130
                        

These stainless steel mandrel bent dual exhaust kits were designed specifically for the 1967-69 Camaro. You will not find a better engineered kit on the market. They can be adapted to any header combination but were designed to be used with Dynatech® MuscleMaxx headers and reducer cones.

Includes lead pipes, intermediate pipes, mufflers, tailpipes and hardware.

Instructions (PDF) 

Ididit 1520790051 Black Tilt Steering Column, 1969 Camaro
SKU-44606969
                        The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
  • For '69 Camaro & Firebird
  • Bolt-In
  • Black powdercoated
  • 8 position tilt
  • Self canceling turn signals
  • 4 way flasher
  • Knob & Levers
  • Collapsible
  • 3-7/8" wiring plug
  • 3/4" - 36 spline lower shaft
  • Uses original under dash mount and floor mount along with the factory wiring and plug
  • Made in the USA
Book/Manual - How to Restore Your Camaro, 1967-69
SKU-28178178
                        About 700,000 Camaros were built from 1967 to  1969. The first-generation Camaro has won a die-hard following and has  become an iconic performance car. Camaros in excellent condition command  very high prices, so many owners are compelled to perform a  professional-grade original restoration. Since these cars are about 40  years old, many cars need second or third restorations, and as time goes  by, these cars will continue to appreciate and require restoration.  That's where How to Restore Your Camaro 1967-1969 comes in. While some  owners can afford to pay shops to perform a 100-point restoration for  show car competition, many owners want to perform a faithful, detailed  restoration themselves, so the car maintains its collector value and use  it as a fun weekend driver. This book will serve those owners.

A lead title in our Restoration Series, How to Restore Your Camaro 1967-1969 will provide in-depth, hands-on information and photography for restoring these popular and historically significant cars. It covers all aspects of restoration, including engines and drivelines, bodywork, interior and trim, suspension, brakes, chassis, and steering for the first-generation Camaros. Organization and planning will be covered, so restorers can stay on task. Disassembly, inspection, and sourcing the best parts will also be covered. This volume will deliver a concise and revealing overview of each subject area and shows the most critical aspects of the restoration process with sequential step-by-step photos and detailed captions. The most efficient techniques and best products for returning each component to like-new condition will be covered. With this information, owners will be able to determine what's involved in each step of the restoration and decide whether to perform the work themselves or outsource it to a professional shop. Color step-by-step how-to information on Camaro restoration has never been offered in a package like this before. Finally, Camaro owners have the book they need.
  • By Tony Huntimer
  • 176 pages
  • Photos: 388 color
  • Paperback
  • Sold individually
Classic Instruments Gauge Set Dash Assembly, 1967-68 Chevy Camaro
SKU-2751013
                        Classic Instruments '67-'68 Camaro Package gauge  sets dress your classic muscle with modern technology and authentic  looks. Classic combines their 5 in. SpeedTachular and Quad gauges in a  premium OEM reproduction dash bezel to provide you and your Camaro with  all of the accurate data that you need for the roads ahead! This package  is ready to bolt in, come complete with instrument harnesses, and  feature black aluminum bezels, real curved glass, and LED turn signals.  Give your first-generation Camaro or Firebird back its original look,  but with updated precision--add Classic Instruments '67-'68 F-Body  Package gauge sets to your American classic. 
  • Black "Velocity" face design - Blk
  • Black & Green "G-Stock" face design - Gstk
  • For 67-68 Camaro and Firebird
  • Set includes mounting face bezel, pre-assembled bracketry, pre wired, t/s, high beam installed
  • Standard GM sender pack included
  • Fuel level gauge pre-programmed 0-90 ohm to allow stock fuel tank sender to be used
  • No fuel sender included

Classic Instruments Installation Manual (PDF)