Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Flex-A-Lite 640 Mojave Universal Heater

Specs
Overall Height:
5.00
Overall Width:
9.00
Overall Length:
10.25
Sold in Quantity:
Each
Notes
Hot water heater includes a fan switch, fuse, and wiring. Features a 3-speed blower fan.
Flex-A-Lite 640 Mojave Universal HeaterFlex-A-Lite 640 Mojave Universal HeaterFlex-A-Lite 640 Mojave Universal Heater
Flex-A-Lite 640 Mojave Universal Heater

Click image to enlarge

Speeday Motors Logo
X
Flex-A-Lite 640 Mojave Universal Heater

Details

Reviews

Q & A

What's in the Box

This 12,000 BTU universal heater is fully self contained, but compact in size. The 3 speed fan blows air through a heater core that is plumbed just like any newer car. Works well in most under-dash applications. Includes universal switch, fuse and wiring.

Also available is a universal plenum which also has provisions for defroster hookups.

359-640 Instructions (PDF)

Notes

  1. When installed on the heater, the overall dimensions of the assembly (heater with plenum) are:
    • 5" tall
    • 10" wide
    • 13" deep

You may also be interested in:

Warmseats Seat Heater
                        

Perfect for a roadster or any car without a heater.  These state of the art seat heaters are OEM applications.  Easy to install heaters fit between the foam and upholstery of the seats bottom and back.  The pre-wired heater has a Hi/Lo/Off switch and only draws 3-1/2 amps.  You will need one heater for each vehicle occupant.  12 volt.

910-70030 Instructions (pdf)

Warmseats Seat Heater, Waterproof Orange Unit
                        

Perfect for a roadster or any car without a heater.  These state of the art seat heaters are OEM applications.  Easy to install heaters fit between the foam and upholstery of the seats bottom and back.  The pre-wired heater has a Hi/Lo/Off switch and only draws 3-1/2 amps.  You will need one heater for each vehicle occupant.  12 volt.

Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
                        

These all new universal street rod heaters give you the option of heat in your custom ride with the ease of installation.  They feature a compact size, two-speed fan, and rear fan guard.

  • 9-1/2" x 6-1/2" x 7"
  • Adjustable louver to direct heat flow
  • 12V 20,000 BTU heater
  • Has rear exit hose connections for convenient mounting
Vintage Air 03260 SuperFlow Horizontal Condenser
                        

The cool people at Vintage Air technology have done it again! Defining their commitment to creating superior products, Vintage Air offers these SuperFlow condensers. These condensers have a unique micro tube design with improved refrigerant flow to provide much more capacity than any other comparable tube and fin condenser. By providing increased refrigerant contact with the micro tube walls and multiple passes per circuit, SuperFlow condensers furnish more sufficient flow for a more efficient system and much cooler air. Vintage Air SuperFlow condensers are available in horizontal models, which are perfect for late model cars. They offer more grille area and most include universal mount bracket kits. Oh, and by the way, increased condenser capacity means that more heat is dissipated, pressure drops, and your compressor turns more easily. "So what," you say? Well, if your engine isn't working as hard, you gain a boost of horsepower! Cool, huh? Vintage Air--the people who know all about living cool.

  • Micro tube design with improved refrigerant flow
  • More sufficient flow for a more efficient system and much cooler air
  • Horizontal model - perfect for late model cars
  • Includes mounting brackets
  • 14" tall x 18" wide x .83" thick
  • Male o-ring fittings, #8 top and #6 bottom fitting
Vintage Air 03332 SuperFlow Vertical Condenser
                        

The cool people at Vintage Air technology have done it again! Defining their commitment to creating superior products, Vintage Air offers these SuperFlow condensers. These condensers have a unique micro tube design with improved refrigerant flow to provide much more capacity than any other comparable tube and fin condenser. By providing increased refrigerant contact with the micro tube walls and multiple passes per circuit, SuperFlow condensers furnish more sufficient flow for a more efficient system and much cooler air. Vintage Air SuperFlow condensers are available in vertical models for those tight spots in your classic street rod, and most include universal mount bracket kits. Oh, and by the way, increased condenser capacity means that more heat is dissipated, pressure drops, and your compressor turns more easily. "So what," you say? Well, if your engine isn't working as hard, you gain a boost of horsepower! Cool, huh? Vintage Air--the people who know all about living cool.

  • Micro tube design with improved refrigerant flow
  • More sufficient flow for a more efficient system and much cooler air
  • Vertical model - for those tight spots in your classic street rod
  • Includes mounting brackets
  • Designed for street Rods (1932-'40 and most pre-'48 cars)
  • 20.75" tall x 14" wide x .75" thick
  • #8 fitting at top / #6 fitting at bottom
Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
                        Trust your heating and cooling needs to Vintage Air!  These universal heater/air conditioning kits are perfect for upgrading the outdated system in your classic ride or just adding a comfort necessity that was once not an option for your automobile.  Regardless of the reason, these redesigned kits are sure to satisfy your needs, with all necessary components and detailed instructions included.  Made in the USA.

Includes:

  • Evaporator
  • Controller         
  • 2-Louvers   
  • Compressor  (No compressor bracket)
  • Hose Kit w/drier
  • Safety switch
  • Detailed instructions

Note:  The Gen II Compac Kit is sold without an A/C condenser. 

Vintage Air Gen II Universal Heat and Air Kit with Vertical Condenser
                        Trust your heating and cooling needs to Vintage Air!  These universal  heater/air conditioning kits are perfect for upgrading the outdated  system in your classic ride or just adding a comfort necessity that was  once not an option for your automobile.  Regardless of the reason, these  redesigned kits are sure to satisfy your needs, with all necessary  components and detailed instructions included.  Made in the USA.

Includes:

  • Evaporator
  • Controller         
  • 2-Louvers   
  • Compressor  (No compressor bracket)
  • Vertical A/C condenser (for early styled cars)
  • Hose Kit w/drier
  • Safety switch
  • Detailed instructions
Vintage Air Gen II Universal Heat and Air Kit with Horizontal Condenser
                        Trust your heating and cooling needs to Vintage Air!  These universal   heater/air conditioning kits are perfect for upgrading the outdated   system in your classic ride or just adding a comfort necessity that was   once not an option for your automobile.  Regardless of the reason,  these  redesigned kits are sure to satisfy your needs, with all  necessary  components and detailed instructions included.  Made in the  USA.

Includes:

  • Evaporator
  • Controller         
  • 2-Louvers   
  • Compressor  (No compressor bracket)
  • Horizontal A/C condenser (for later styled cars)
  • Hose Kit w/drier
  • Safety switch
  • Detailed instructions
Speedway Universal Fit Street Rod Heater, 30,000 BTU
                        These all new universal street rod heaters give you  the option of heat in your custom ride with the ease of installation.   They feature a compact size, two-speed fan, and rear fan guard.
  • 16" x 6 1/2" x 7"
  • Twin adjustable louvers to direct heat flow
  • 12V 30,000 BTU heater
  • Has rear exit hose connections for convenient mounting

Universal Street Rod Heater Installation Instructions (PDF)

Flex-A-Lite 650 Standard Plenum for Mojave Universal Heater
                        

This plenum is made of black molded plastic and snaps onto the outlet 'grille' of the mojave heater. It has a nipple to attach one, 2.5" flex hose (like dryer vent hose - not included) to the side of the plenum.

The plenum also has two round vents that can be rotated and which have two vanes that can be positioned to direct the airflow almost any direction or even closed to force air into the defrost hose.

  • 4-3/4" tall
  • 8-1/2" wide
  • 4-1/2" deep

When installed on the heater, the overall dimensions of the assembly (heater with plenum) are:

  • 5" tall
  • 10" wide
  • 13" deep

When the plenum is snapped onto the heater, the total depth (front to back) is approximately 13".

 

Slimeline Plenum for Mojave Heater
                        

This plenum is made of black molded plastic and snaps onto the outlet 'grille' of the mojave heater.

The plenum also has two round vents that can be rotated and which have two vanes that can be positioned to direct the airflow almost any direction.