Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Flex-A-Lite 650 Standard Plenum for Mojave Universal Heater

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

This plenum is made of black molded plastic and snaps onto the outlet 'grille' of the mojave heater. It has a nipple to attach one, 2.5" flex hose (like dryer vent hose - not included) to the side of the plenum.

The plenum also has two round vents that can be rotated and which have two vanes that can be positioned to direct the airflow almost any direction or even closed to force air into the defrost hose.

  • 4-3/4" tall
  • 8-1/2" wide
  • 4-1/2" deep

When installed on the heater, the overall dimensions of the assembly (heater with plenum) are:

  • 5" tall
  • 10" wide
  • 13" deep

When the plenum is snapped onto the heater, the total depth (front to back) is approximately 13".

 

You may also be interested in:

Warmseats Seat Heater
                        

Perfect for a roadster or any car without a heater.  These state of the art seat heaters are OEM applications.  Easy to install heaters fit between the foam and upholstery of the seats bottom and back.  The pre-wired heater has a Hi/Lo/Off switch and only draws 3-1/2 amps.  You will need one heater for each vehicle occupant.  12 volt.

910-70030 Instructions (pdf)

Slimeline Plenum for Mojave Heater
                        

This plenum is made of black molded plastic and snaps onto the outlet 'grille' of the mojave heater.

The plenum also has two round vents that can be rotated and which have two vanes that can be positioned to direct the airflow almost any direction.

Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
                        

These all new universal street rod heaters give you the option of heat in your custom ride with the ease of installation.  They feature a compact size, two-speed fan, and rear fan guard.

  • 9-1/2" x 6-1/2" x 7"
  • Adjustable louver to direct heat flow
  • 12V 20,000 BTU heater
  • Has rear exit hose connections for convenient mounting
Speedway Universal Fit Street Rod Heater, 30,000 BTU
                        These all new universal street rod heaters give you  the option of heat in your custom ride with the ease of installation.   They feature a compact size, two-speed fan, and rear fan guard.
  • 16" x 6 1/2" x 7"
  • Twin adjustable louvers to direct heat flow
  • 12V 30,000 BTU heater
  • Has rear exit hose connections for convenient mounting

Universal Street Rod Heater Installation Instructions (PDF)

Flex-A-Lite 640 Mojave Universal Heater
                        

This 12,000 BTU universal heater is fully self contained, but compact in size. The 3 speed fan blows air through a heater core that is plumbed just like any newer car. Works well in most under-dash applications. Includes universal switch, fuse and wiring.

Also available is a universal plenum which also has provisions for defroster hookups.

359-640 Instructions (PDF)