Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless

SAME DAY SHIPPING! Order within the next 14 hours 35 minutes and receive same day shipping

Specs
Material Type:
Stainless Steel
Overall Length:
30.00
Sold in Quantity:
Each
Finish:
Polished
MFG. Part #:
FR20001SS
Output Shaft Type:
1" DD
Shifter Location:
Floor
Column Tilt:
Yes
Key Location:
Dash
Collapsible:
No
Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless
Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Don't you wish you had a little more room than that roadster column gives you? This 30" tilt column has a 1-3/4 " tube diameter so it can replace your existing column easily. It accepts the normal '69-'94 GM steering wheel adapters, 1" DD u-joints, as well as common GM turn signal connectors.

  • All new components (not from a junkyard)
  • Made of 304 grade stainless steel tubing
  • For use with floor shifters (no column shift provisions)
  • Includes Billet Dress Up Kit (tilt/turn signal levers and hazard knob)
  • GM wiring (4-1/4" connector)
  • Made in the USA

 

Specs

  • Key:  Non-Key
  • Style:  Floor Shift
  • Diameter:  1-3/4"
  • Length:  30"
  • Size:  1" DD
  • Measures 7-1/2” from the end (steering wheel mount) to the end of the cone where the cone transitions into the 1-3/4 shaft.

You may also be interested in:

Ididit 2400500040 Steering Column Ball Swivel Lower Mount, 1-3/4 Inch
(Part #4464050)
                        

Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.

Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.

446-4050 Instructions (PDF)

Street Rod Steering Column Drop Mount, 1-3/4 In Hole, 2-1/2 In Drop
(Part #91032269)
                        

These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

  • 1-3/4 Inch diameter hole
  • 2-1/2 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

 

Ididit 2208310040 Billet 3-bolt Steering Wheel Adapter
(Part #4462831)
                        

This polished billet aluminum steering wheel adapter allows you to put common 3-bolt steering wheels on Ididit and most 1969-1994 GM columns. This hub adapter comes with a spring for the horn button and a plunger/spring assembly.

  • Top is 11/16" x 36 spline I.D. (GM, Ididit, Flaming River columns)
  • Bottom is 1/2" straight and .753 I.D. to fit a 3/4" shaft
  • 1-3/16" tall
  • 2-1/2" I.D. holes for the horn plunger lead wire
  • Standard 3-bolt pattern for custom steering wheels in 1/4" fine thread

 

Ididit 2400800010 Adjustable Steering Column Floor Mount, 1-3/4 Inch
(Part #4462400)
                        

This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available. 

  1. Select (1) column mount diameter needed.
  2. Select (1) boot color needed, part # 4462405-color.
446-2400 Instructions (PDF)
Ididit 2400300010 Steering Column Band Swivel Lower Mount, 1-3/4 Inch
(Part #4464030)
                        

Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

446-4030 Instructions (PDF)

Street Rod Steering Column Drop Mount, 1-3/4 In Hole, 3-1/2 In Drop
(Part #91032270)
                        

These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

  • 1-3/4 Inch diameter hole
  • 3-1/2 Inch drop
  • Mount hole spacing is 2-7/8".
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

 

Street Rod Steering Column Drop Mount, 1-3/4 In Hole, 5-1/2 In Drop
(Part #91032271)
                        

These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

  • 1-3/4 Inch diameter hole
  • 5-1/2 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

 

Garage Sale - V8 Steering 1-3/4 Inch Column Drop
(Part #91032332)
                        

Accessorize your Ford street rod with a column drop inspired by the iconic Ford V8 logo from the 1930's

This highly polished billet aluminum column drop is available to fit 1-3/4 steering columns and has a 5-1/2" drop.

This item is garage sale priced because it has been discontinued from our current product line.

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Flaming River FR20001 1-3/4 Inch Tube Floor Shift Column, Plain Finish
(Part #715201)
                        

Don't you wish you had a little more room than that roadster column gives you? This 30" tilt column has a 1-3/4 " tube diameter so it can replace your existing column easily. It accepts the normal '69-'94 GM steering wheel adapters, 1" DD u-joints, as well as common GM turn signal connectors.

  • All new components (not from a junkyard)
  • Made of 304 grade stainless steel tubing
  • For use with floor shifters (no column shift provisions)
  • Includes Billet Dress Up Kit (tilt/turn signal levers and hazard knob)
  • GM wiring (4-1/4" connector)
  • Made in the USA

 

Sweet Mfg U-Joint, 1 In DD, 3/4 Round, IDIDIT/Flaming River Column
(Part #91032400)
                        

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Sweet Mfg U-Joint, 1 In DD to 3/4 DD, IDIDIT/Flaming River Column
(Part #91032401)
                        

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing.

These steering universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickel plating prevents rust without the hassle of painting.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Grant 3196 3-Bolt Steering Wheel Adapter, GM Applications
(Part #4103196)
                        

This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a 1969-1994 GM, Ididit or Flaming River steering column. Horn button not included. Includes black metal cover, horn button spring, plunger spring, lead wire and three mounting bolts. Grant does not include a spacer as it is typically not needed for most applications, but if required, a simple washer will suffice.

Adapter Application Chart (GIF)

Note: When using this adapter, if the column has not previously had a steering wheel mounted, # 910-64049 will also be required.

410-3196 Instructions (PDF)