Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Firewall Mount Flanged Bearing for Steering Shaft

Specs
Sold in Quantity:
Each
Centerline of Holes:
2.25
Overall Width:
3.00
Overall Thickness:
-
Inside Diameter:
-
Notes
Bearing housing is 1.59" OD
Firewall Mount Flanged Bearing for Steering Shaft
Product Video
Firewall Mount Flanged Bearing for Steering Shaft

Click image to enlarge



Details

Reviews

Q & A

What's in the Box

This firewall mount allows up to 30° of mis-alignment. Includes ball with two pressed steel flanges with 5/16" mounting holes.

Choose 3/4" (.750) or 1" (0.995") shaft size.

91032375-1000

  • Height: .74"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"
  • Inside diameter: 0.995"

91032375-750

  • Height: .87"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"

Customer Reviews

Rated 4.4 out of 5 by 19 reviewers.
RATING BREAKDOWN
19 reviews
5 Stars
13
4 Stars
3
3 Stars
1
2 Stars
1
1 Star
1
RECOMMEND THIS PRODUCT:

Trickey
Verified Purchaser
Granbury TX

Quality piece

January 14, 2016
Good piece to support any shaft
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Slice of Life
Verified Purchaser
Verified Reviewer
Prosper, Tx

Good quality

January 14, 2016
Works great! Heavier than expected which is a good thing. Appears to be excellent quality.
Pros:
  • Good Quality
  • As Descibed
  • Solid
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

huge
Verified Purchaser
Qc, Canada

Poor qualité

December 23, 2015
When i receive this product, the bearing was really really hard to turn and it get stuck many time. Then the diameter was to tight for a 1 inch shaft, I had to sand the OD. The to holes for mounting the bearrings is to tight each other for a good mounting. the finish quality is really bad, still have sharp edges. And, even if sometimes the bearing get stuck, in some angle the bearing have a really big shaft play. And finally the bearing make big noise even with good oil. I order 2 for my carbon fiber steering shaft, but this poor quality product wont be in my racecar, make me loose time
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Thanks for your feedback! We appreciate hearing from you. Your review has been passed along to our Quality Control Team to record and inspect the issue with these steering shaft bearings. We are really sorry about the various issues they've caused. Feel free to contact our Customer Service Team at 402.323.3200 for further assistance.
Digger73
Verified Purchaser
Portland, Oregon

Good quality part

November 10, 2015
Needed a mount for the steering shaft. This fits the roll as a mount and as a through the firewall point.
Pros:
  • function
  • Price
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Mike
Verified Purchaser
Verified Reviewer
Ventura, CA

Good product

September 23, 2015
Fits well, good product
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

fordkid
Verified Purchaser
Ashford AL>

The bearing vear good cualty works welle

June 11, 2015
Doze what its mad for Works grate
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Bad bus
Verified Purchaser
Grand jct. Co,

product smaller than appears

May 11, 2015
Smaller than appears . But I had made it work out for me .
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Egghead
Yale, Oklahoma

excelent product.

September 26, 2013
this steering bearing made it so easy to mount to the fire wall. I recomend using this product on all custom firewalls .
Pros:
  • ease of installaction
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

big429
Verified Purchaser
Newport, TN 37821, USA

This is a great product

May 24, 2013
Hi if any one is building a car almost of any type I say you need this item to make thing work a lot better and it is a quite fix.I just don't know how I have gone with out one of these before. I think it is great. I also most likely need another one for one of the cars I am going now. Thank you for the great work you all do.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Spifz
Verified Purchaser

Almost unusable

March 13, 2013
I purchased the 1" shaft version of this product. The ball is extremely thin, and the fit between the ball and race has no preload (actually, it is worse, it has a noticeable play of about .010.) Possibly because of how thin the ball is near the edges (there is no flat surface like that pictured, but the picture may be of a .750 ID unit) and was deformed or crimped over, it was impossible to slide the bearing over a shaft that measured .995. It took significant deburring of the edges of the ball on the ID before the shaft would fit. I'll likely purchase a bearing unit that has two mounting plates that clamp together to fix the ball angle when tightened, and that has a shaft collar built in to ensure a good fit of the shaft like the other steering bearing I have.
Pros:
  • can be used if you do some work to it
  • Low Cost
Cons:
  • will introduce steering play
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

4 questions : 5 answers

1 answers

What is the center to center distance of the mounting holes?

Scottsssss
March 31, 2014

What is the center to center distance of the mounting holes?

Answers

March 31, 2014
EricM
The mounting holes are 2 1/4" from center to center.
2 answers

I need to know 2 things : 1. what is the overall height of this piece ? 2. What has been your experience, if any, using this on a street rod application ?

Mike W.
Peoria, IL
May 31, 2011

I need to know 2 things : 1. what is the overall height of this piece ? 2. What has been your experience, if any, using this on a street rod application ?

Answers

September 27, 2013
Egghead
approximately 2 inches. yes it worked well in my street rod application.
June 03, 2011
John
91032375-1000 Height: .74" Length: 3.00" Width: 1.90" Mount C to C: 2.26" 91032375-750 Height: .87" Length: 3.00" Width: 1.90" Mount C to C: 2.26" Used commonly in street rods and race cars
1 answers

Can this be used with a 3/4 DD shaft instead of round?

Gary
bakersfield ca
May 27, 2015

Can this be used with a 3/4 DD shaft instead of round?

Answers

May 28, 2015
Eric
Expert
Yes this support bearing can be used with a 3/4" DD shaft as well.
1 answers

What is the OD of the bearing housing portion of the flange? Need to determine if it would fit inside the column tube.

Chunk
Charlestown, RI
December 10, 2015

What is the OD of the bearing housing portion of the flange? Need to determine if it would fit inside the column tube.

Answers

December 11, 2015
Eric
Expert
The bearing housing is 1.59" OD.
Page 1 of 1

You may also be interested in:

Firewall Mount Steering Shaft Bearing, 3/4 Inch Shaft Size
(Part #910102)
                        

These bearings have a .757" ID to slip over your 3/4" steering shaft and are in a lightweight aluminum bracket to allow easy installation of your firewall.

From center of bearing to center of mounting hole is 1.456" or approximately 1-1/2". This produces about a 3" mounting circle for the 3 mounting holes. 

Hollow Steering Shaft
(Part #91632201)
                        

This steering shaft is hollow and is cut-to-fit. This steering shaft entails:

  •   3/4" DOM
  • .120" wall hollow steering shaft
  • Available in 24", 36", 48", 60" and 72" length
  • Steel Steering shaft

Item Details

Steel Shaft
3/4 O.D. Solid Steel Steering Shaft
(Part #91632200)
                        

Speedways steering shaft is made for you to cut-to-fit. This steering shaft entails:

  •  3/4" O.D.
  • 1018 solid steel steering shaft
  • Available in 24", 36", 48", 60" and 72" lengths

 

Steer Shaft Application Chart

Steering Shaft Aluminum Heim Joint Rod Ends, 3/4-16 RH Male, .757 Hole
(Part #1750759)
                        3/4" heim for steering shaft support.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.