ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Fire Bottle BRC-500-1 Fire Suppression System, 5 Lbs.

SAME DAY SHIPPING! Most orders ship within 24 hours.

Fire Bottle BRC-500-1 Fire Suppression System, 5 Lbs.

Click image to enlarge

Please NOTE the following about this product:

  • Ground Shipping Only - Can't Ship Air.

Details

Reviews

Q & A

What's in the Box

Extinguishes rapidly with no residue using DuPont FE-36, which works as well as Halon. Approved by NASCAR, NHRA and has gone through SFI testing certification. Pull cable to extinguish fire. Class A, B & C fires. Unit is NOT rechargeable. 

  • Discharges completely - you don't fight the fire
  • Acts without delay - stops it at the start
  • Does not obscure vision, nor impede actions of driver or safety crews
  • No chemical residue, nor costly clean up
  • D.O.T. approved and SFI certified

Kit contains:

  • Aluminum bottle, 16-3/4" tall x 4-1/4" diameter (9 lbs.)
  • Anodized valve pressure gauge
  • Two nozzles
  • Control knob with 4 ft. cable
  • Hardware
  • 1/4" O.D. aluminum tubing

CANNOT SHIP BY AIR! 

623-RC500 Instructions (PDF)

Customer Reviews

This product has no reviews.

Product Q&A

2 questions : 2 answers

1 answers

How much does the system weight? How much weight does the system add?

SBRNET
July 02, 2014

How much does the system weight? How much weight does the system add?

Answers

July 02, 2014
EricM
This entire system weighs 10 pounds.
1 answers

we need fire extinguisher for inside of card does this meet qualifications and does it come with mount for car where do you suggest to mount in car

bob
michigan
March 12, 2012

we need fire extinguisher for inside of card does this meet qualifications and does it come with mount for car where do you suggest to mount in car

Answers

March 13, 2012
Eric
This extinguisher is DOT and SFI approved and would be suitable for mounting inside of a car. This extinguisher can be mounted anywhere you find convenient in the car. See the instructions PDF on this page for exact position requirements to mount this unit.
Page 1 of 1

You may also be interested in:

Fire Bottle NOZZLE-1 Supression System Nozzle
(Part #623001)
                        Replacement/extra nozzle for Fire Bottle Fire Systems.

Item Details

1/8"-27 thread size
Fire Bottle BRC-1000-1 Fire Suppression System, 10 Lbs.
(Part #623RC1000)
                        

Extinguishes rapidly with no residue using DuPont FE-36, which works as well as Halon. Approved by NASCAR, NHRA and has gone through SFI testing certification. Pull cable to extinguish fire. Class A, B & C fires. Unit is NOT rechargeable.

  • Discharges completely - you don't fight the fire
  • Acts without delay - stops it at the start
  • Does not obscure vision, nor impede actions of driver or safety crews
  • No chemical residue, nor costly clean up
  • D.O.T. approved and SFI certified

Kit contains:

  • Aluminum bottle, 18-1/4" tall x 5-1/4" diameter (15 lb. 4 oz.)
  • Anodized valve pressure gauge
  • Two nozzles
  • Control knob with 4 ft. cable
  • Hardware
  • 1/4" O.D. aluminum tubing

623-RC1000 Instructions (PDF) 

CANNOT SHIP BY AIR!

Cold Fire Suppression System - Complete 1 Liter System
(Part #48675050)
                        

Cold Fire™ is a multi-purpose fire suppressing agent that beats other foams hands-down! Completely 'green' and non-toxic, Cold Fire puts out any Class A or B fire, hydrocarbons or polar solvents, as well as metals, tires, and asphalt. Also suppresses vapors and helps to remediate spills.

  • UL Listed - 2N75
  • Will extinguish Class A, Class B, flammable metals and grease fires
  • Dilution rate down to just 0.15% for Class A fires
  • Meets NFPA 18 Standards
  • Hazardous Materials Identification System (HMIS) rating of 0,0,0 - same as water
  • 100% soluble in water
  • Extinguishes fires (even oil and alcohol-based fires) quickly and on contact; effective on oil well and tanker fires, tire fires, fuel/ethanol fires, grass, brush and forest fires, and metal fires (including magnesium and aluminum)
  • Will not gel or crystalize in foam tanks, hoses or nozzles - less cleanup
  • Indefinite Shelf Life - never throw away unused foam!
  • Completely non-toxic and biodegradable
  • Can use in foam tanks, batch mixed, CAFS systems - even water canisters!
This is the first system of its type to offer automatic fire detection. The proprietary sensing method coupled with a manual actuation button ensures complete protection in any scenario. 2 liter Cylinder Option now also available by clicking here.
  • Automatic and manual actuation
  • Condensed lightweight design
  • Non-toxic, non-corrosive and environmentally friendly
  • Kit includes everything to complete system
  • Recharge and reset in minutes
  • Customizable

Complete system kit # 486-75050 includes the following:

  •  1 Liter stainless steel cylinder, 3.25" dia x 15" 
  • CTSX valve and pressure gauge
  • Cylinder bracket with clamps
  • Manual actuator
  • Ball valve
  • 8' Detection tube
  • Nozzle with fittings
  • 3' composite nozzle tubing
  • 32 Degree Coldfire premix
  • All hardware and instructions

Instructions (PDF)

Please refer to Cold Fire Frequently Asked Questions for more information.