JAZ Products 300-000-20 Fender Mount Fuel Filler Kit
Click image to enlarge
Q & A
What's in the Box
For remote filling of fuel cell. Kit contains a 12-bolt recessed fender fill assembly with vented cap (1/2 turn, twist & lock style). Fender filler flange measures 6-1/4" outside diameter.
Cap and base are made of galvanized steel. Fill and vent hose are clear polyethylene. Use with fast fill valve.
- Recess from filler flange is 1-1/4" deep and inside diameter is 4-3/16".
You may also be interested in:
Jaz-Speedway Fuel Cell Flapper ValveMore Info
Jaz-Speedway Flapper OnlyMore Info
JAZ Products 345-250-03 45 Degree Fast-Fill Fuel Cell ValveMore Info
JAZ Products 315-030-03 Nut Ring for Jaz Fast-Fill ValveMore Info
This flapper valve or rollover valve, installs in the fuel cell and is retained by the bolts used to secure the filler cap flange to the cell.
When fueling the cell, the rubber flap opens. If the cell should become inverted, the rubber flap closes to seal off the filler opening so that fuel cannot leak out.
A must have safety item!
458-315 Instructions (pdf)
A must have safety item! Required by most sanctioning bodies. IMCA approved.
Cast aluminum fill valve mounts on fuel cell. Has spring loaded flapper valve. Mounts with twelve bolts on a 5" circle. 6-1/2" outside diameter. 2-1/2" hose end.
Requires split nut ring 458-358 to install.
Required split nut ring to install Jaz 45° Fast-Fill fuel cell valve.