Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Elgin EPL-4 Assembly Lube, 4 Oz.

SAME DAY SHIPPING! Order within the next 12 hours 48 minutes and receive same day shipping

Elgin EPL-4 Assembly Lube, 4 Oz.
Elgin EPL-4 Assembly Lube, 4 Oz.

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Eliminates galling, metal transfer and oil starvation during initial break-in. Adheres to metal surfaces, will not drain off. Apply to bearings, gears, crankshafts, cam lobes, valve stems, lifters and all mating parts with close tolerances.

For gas, alcohol and nitro engines.

Learn why using assembly lube is so important in our tech article, Installing New Hardware.

You may also be interested in:

Isky Racing Cams RL-48 Camshaft Rev Lube, 4 Oz.
SKU-450R4
                        

Isky Rev Lube is a moly-sulphide paste used to protect cam lobes and tappets, rocker arms, valve stems and guides, push rod ends and distributor drive gears during initial start-up and break-in.

Learn why using assembly lube is so important in our tech article, Installing New Hardware.

Red Line 80402 CV-2 Synthetic Grease
SKU-60710002
                        

Red Line’s team of chemists formulate fully-synthetic lubricants using only the world’s finest base stocks. At Red Line, it’s not designed to be the cheapest – it’s built to be the best. Red Line only uses superior polyester-based products – resulting in lubricants that are extremely stable at high temperatures.

Synthetic CV-2 grease provides excellent water resistance, low temperature flow, and its very high melting point allows it to be used in high temperature wheel bearings, high angle and conventional CV-joints, chassis lubrication and many industrial applications.

  • Outperforms the best conventional or synthetic greases and lubes
  • Excellent high-temp stability, extreme-pressure protection, and water resistance
  • Used in a variety of applications with operating temps from -100°F to 500°F
  • Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
  • Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
  • Synthetic fluidity allows increases in bearing life up to 200%
  • Contains a red moly compound which is a superior lubricant to black moly disulfide lubricants
Red Line 80312 Engine Assembly Lube, 4 Oz.
SKU-60710004
                        

Red Line Oil Assembly Lube is not designed to be the cheapest – it's built to be the best. It has three times greater film-strength than conventional black Molybdenum Disulfide lubricants. Provides excellent rust and corrosion protection. Stays put and supplies a high film strength for protection. Excellent for crankshaft installation. Can be used safely with all metals, including bearings. Can be used with petroleum or synthetic oils.

  • Prepares potential wear surface and prevents metal contact before adequate lubrication can be supplied
  • Will not plug filters after initial engine start-up, unlike other assembly lubes
  • Provides 3x greater film strength than conventional black Molybdenum Disulfide greases
  • Excellent rust and corrosion inhibitor, allows for long-term storage
  • For use on camshafts, lifters, pushrods, piston skirts, main and rod bearings, and bolt threads
  • Do not use on exhaust bolts or other high temperature bolts which require an anti-seize
  • Recommended and used by top camshaft and drivetrain manufacturers

Assembly Lube Product Data (PDF)

Learn why using assembly lube is so important in our tech article, Installing New Hardware.

COMP Cams 159-12 Engine Break-In Lube Oil Additive
SKU-282159
                        

ZDDP-enhanced Engine Break-In Lube Oil Additive from COMP Cams provides maximum engine life while also allowing it to reach its full performance potential. It does so by improving the surface mating of valve train components (especially flat tappets), rotating assembly, rod journals, piston rings, valve guides and other vital areas of the engine. This proprietary break-in lube formula includes the optimum amount of critical additives ZDDP (Zinc & Phosphorus), Molybdenum, detergents and high grade base oil.

The multi-viscosity, mineral-based COMP Cams Engine Break-In Oil Additive is fully-formulated and requires no additives or supplements. In addition, the oil is fully compatible with gasoline, methanol and high octane racing fuels.

Lucas 10152 Assembly Lube
SKU-484101521
                        

Lucas High Performance Assembly Lube is designed for mechanics and technicians to pre lube bearings, cams, lifters and valve train. The Semi-Synthetic formula contains ZINC, MOLY and other high pressure additives which offer maximum protection during engine break-in. Super slick and easy to use, Lucas High Performance Assembly Lube will eliminate dry starts and prevent seizing galling and scuffing.

  • Eliminates Dry Starts
  • Perfect For Engine Building
  • Use To Pre Lube Bearings, Cams, Lifters and Valve Train
  • Prevents Seizing Galling and Scuffing
  • Compatible With All Oils
  • Super Slick and Tacky
  • Prevents Breakdown During Long Term Storage
  • Contains ZINC, MOLY and Other High Pressure Additives
  • Easy To Use

Learn why using assembly lube is so important in our tech article, Installing New Hardware.

484101521 Semi-Synthetic Assembly Lube Safety Data Sheet (PDF)

484101521 Semi-Synthetic Assembly Lube Technical Data Sheet (PDF)