Oil filled heavy duty coils are guaranteed to out perform your stock unit delivering over 30% more spark energy. The oil filled design and arc resistant top, results in superior performance. The coil delivers the added voltage required by street and strip performance engines, and will fit in most standard OEM brackets.
This 12V Ignition Coil will deliver the added voltage required by street and strip performance engines. For use with CD Ignition Control Box 910-2015.
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.The 0.8 ohm ballast resistor must be used with stock points ignition and Mallory Unilite applications. Includes MSD Power Tower top.
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.
The 0.8 ohm ballast resistor must be used with stock points ignition and Mallory Unilite applications. Includes MSD Power Tower top.
MSD Blaster 2 Ignition Installation Instructions (PDF)
These ignition coil brackets and covers fit over stock coils. Chrome.
Flame-Thrower II coils feature a super low 0.6 Ohm primary resistance which make them the ideal coil for Ignitor II ignition systems, Flame-Thrower billet distributors, as well as many other high energy ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes.
Flame-Thrower II coils feature a super low 0.6 Ohm primary resistance which make them the ideal coil for Ignitor II ignition systems, Flame-Thrower billet distributors, as well as many other high energy ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy.
These coils are also compatible with most capacitive discharge boxes.
The Procomp PC6AL is the most powerful cd ignition of its type available. It is a multi-spark, capacitive discharge, electronic ignition designed for high performance street, drag racing, oval track and marine applications. The PC6AL uses the latest state of the art digital technology, and when used with the Procomp high performance coil, produces a spark gap current three times greater than most similar systems and almosst eight times the spark of the standard ignition. This CDI unit can be triggered by magnetic, hall effect, points and crank trigger pick ups. Includes a Soft Touch rev limiter, which does not require chips. Produces multiple sparks between 0 and 3000 rpm.
The Procomp PC6AL is the most powerful cd ignition of its type available. It is a multi-spark, capacitive discharge, electronic ignition designed for high performance street, drag racing, oval track and marine applications.
The PC6AL uses the latest state of the art digital technology, and when used with the Procomp high performance coil, produces a spark gap current three times greater than most similar systems and almosst eight times the spark of the standard ignition. This CDI unit can be triggered by magnetic, hall effect, points and crank trigger pick ups. Includes a Soft Touch rev limiter, which does not require chips. Produces multiple sparks between 0 and 3000 rpm.
Not only is this finned aluminum coil mount good looking, it actually has some worthwhile features too. Features a standoff mounting rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. Mounted with 1/4"-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft grade A356 aluminum and polished to a very high sheen.Made in USA.
Not only is this finned aluminum coil mount good looking, it actually has some worthwhile features too. Features a standoff mounting rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. Mounted with 1/4"-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft grade A356 aluminum and polished to a very high sheen.
Made in USA.