Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Eibach Springs 3855.140 1964-67 Chevelle Pro-Kit Lowering Spring Set

SAME DAY SHIPPING! Order within the next 4 hours 3 minutes and receive same day shipping

Specs
Color:
Black
Sold in Quantity:
Kit
Finish:
Powder Coated
MFG. Part #:
3855.140
Eibach Springs 3855.140 1964-67 Chevelle Pro-Kit Lowering Spring Set
Eibach Springs 3855.140 1964-67 Chevelle Pro-Kit Lowering Spring Set

Click image to enlarge

Watch the videos below as Eibach springs are compared to stock springs in slalom and brake tests.



Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. This legendary spring system dramatically improves both performance and appearance.

Pro-Kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with high performance wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

  • High Performance Handling and Aggressive Good Looks
  • Lower Center of Gravity -- Lowers Vehicle 1.3" Front, 1.0" Rear
  • Stop Quicker, Corner Faster and get Better MPG
  • Progressive Spring Design for Excellent Ride Quality
  • Million Mile Manufacturers Warranty

Application

Note: Eibach springs are for small block equipped vehicles only.

Item Details

1.3" Drop Front, 1" Drop Rear
Set of Four

You may also be interested in:

Eibach 15 Inch Rear Racing Springs
SKU-330150
                        These rear springs have 15" free height and 5" O.D. Ground flat on both ends. 

As racing get more sophisticated, you need higher quality components to give you that competitive edge. Eibach springs give you that edge with their state-of-the-art manufacturing and tolerances. Eibach springs remain within 2% of their spring rate for the life of the springs.

-#### at end of part number indicates rate.

Eibach Springs 3856.140 1968-72 Chevelle Pro-Kit Lowering Spring Set
SKU-3303856
                        

The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. This legendary spring system dramatically improves both performance and appearance.

Pro-Kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with high performance wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

  • High Performance Handling and Aggressive Good Looks
  • Lower Center of Gravity -- Lowers Vehicle 1.3" Front and Rear
  • Stop Quicker, Corner Faster and get Better MPG
  • Progressive Spring Design for Excellent Ride Quality
  • Million Mile Manufacturers Warranty
Eibach Progressive Pull Bar Springs
SKU-330675
                        Eibach 6-3/4" progressive pull bar springs are available in (500) 500-1000 lb. or (600) 750-1500 lb. Each has a 5" O.D.
                    
Eibach Rear Racing Springs, 5 x 13 Inch
SKU-330130
                        

As racing get more sophisticated, you need higher quality components to give you that competitive edge. Eibach springs give you that edge with their state-of-the-art manufacturing and tolerances.

Eibach springs remain within 2% of their spring rate for the life of the springs.

Several different rates available.

AFCO 20037LF K5108 Low Friction GM Upper Ball Joint
SKU-10620037LF
                        

AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

  • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
  • Improves weight transfer
  • Frees up suspension for more consistent, repeatable chassis tuning
  • Removes suspension rigidity and allows shock and spring to have more precise wheel control
  • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
  • Provides more accurate set-ups during vehicle scaling
  • Meets or exceeds standard ball joint strength
  • Stock appearing
  • Lower input steering efforts and faster steering wheel return

Checking Ball Joint Wear (PDF)

AFCO 20033LF K5103 Low Friction Lower Ball Joint
SKU-10620033LF
                        

AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

  • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
  • Improves weight transfer
  • Frees up suspension for more consistent, repeatable chassis tuning
  • Removes suspension rigidity and allows shock and spring to have more precise wheel control
  • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
  • Provides more accurate set-ups during vehicle scaling
  • Meets or exceeds standard ball joint strength
  • Stock appearing
  • Lower input steering efforts and faster steering wheel return

Checking Ball Joint Wear (PDF)

AFCO 1022 10 Series Street/Strip/Track Front Shock, Comp/Reb: 7/4
SKU-1061022
                        

AFCO has been in the shock business for over 20 years and has incorporated their technological knowledge into this 10-Series street/strip/track shock.  This 80/20 front shock allows the front to lift and hold under acceleration, which transfers weight to the rear tires and improves traction.

Whatever your street stock choice, AFCO has the stock mount shock for you.  These 10-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules.  The split-valve shocks offer additional tuning capabilities over the standard valving. 

Available Split Valves - Part # 1061022 is a "split valve - easy up" shock used on the front to promote weight transfer under acceleration.  This will enhance forward traction.

AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

  • Compressed Length: 9.375"
  • Extended Length: 13.375"

Fits:

  • 1955-86 GM Full Midsize
  • 1955-57 Chevy
  • 1958-70 Impala
  • 1970-81 Camaro/Firebird
  • 1964-89 Chevelle/Monte Carlo
  • 1965-86 Ford Fullsize, Montego and Cougar

 

AFCO 1035 10 Series GM Street/Strip Rear Shock, Comp/Rebound: 3/5
SKU-1061035
                        

AFCO has been in the racing shock business for over 20 years and has incorporated their technological knowledge into this K-Series street/strip shock. These 40/60 rear shocks allow the rear to squat which improves traction through weight transfer.

These split-valve shocks offer additional tuning capabilities over the standard valving. 

Available Split Valves - Part # 1061035 is a split valve shock for rear applications.  Soft compression accents weight transfer.  In circle track applications, used on the left rear, this shock tends to tighten corner exit handling.  Used on the right rear, this shock tends to tighten corner entry handling.

  • Compressed Length: 13.00"
  • Extended Length: 21.00"

Fits:

  • 1955-86 GM Full Midsize
  • 1963-86 Malibu, Chevelle, Monte Carlo, Cutlass and Rega
  • 1968-79 Nova
  • 1958-70 Impala
  • 1964-86 Chevell/Monte Carlo