Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®


Edelbrock 1479 Performer Carburetor Calibration Kit, 1405

SAME DAY SHIPPING! Order within the next 7 hours 18 minutes and receive same day shipping

MFG. Part #:
Edelbrock 1479 Performer Carburetor Calibration Kit, 1405

Click image to enlarge



Q & A

What's in the Box

Most of the time you can bolt an Edelbrock Performer carb on your engine and it’s good to go. But if you have done a little tweaking on the engine you may need to tune it a bit. These kits include an assortment of metering rods and jets, one pair of metering rod retaining springs and a complete assortment of step-up springs.

You may want to order a 325-1477 rebuild kit also.

Item Details

Metering Rods (Pair): .068 x .042, .068 x .052, .070 x .052, .073 x .047, .073 x .052, .075 x .047
Metering Jets (Pair): .089, .092, .098, .101, .104

You may also be interested in:

Book - How to Rebuild and Modify Carter-Edelbrock Carburetors
(Part #91085249)
                        If you want to modify your carburetor-equipped vehicle for performance today, you can choose from three major carburetor families – Holley, Demon, and Edelbrock. While Holley and Holley-style carburetors like Demon have been popular for years with their well documented successes and quirks, there has never before been a book covering the ins and outs of the emerging Edelbrock line of carburetors.

How to Rebuild and Modify Carter/Edelbrock Carburetors reflects the emergence of Edelbrock carburetors as the predominant Carter-style carburetors in the market today. A revision of the best-selling title Super Tuning and Modifying Carter Carburetors, this book contains more than 300 color photos, illustrations, and diagrams, covering rebuilding, tuning, and modifying Carter and Edelbrock carburetors.

This book also features the history of Carter as well as the history of the AFB and the AVS since the purchase by Edelbrock. Author David Emanuel outlines carburetor types, gives a thorough look at carb selection and carb function, and offers detailed information on modifications, tuning, and rebuilding Carter/Edelbrock carburetors.
Edelbrock 1477 Performer Carburetor Rebuild Kit
(Part #3251477)

Includes parts & gaskets to rebuild all Edelbrock Performer square-bore carbs.

325-1477 Instructions (PDF)

Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
(Part #3258126)

These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

Fuel Line Kit Instruction Sheet (PDF)

Wehrs Machine WM47 Carburetor Feet
(Part #91689402)
                        Bolt to the base of your carburetor so you can work on it without damaging the throttle assembly.
  • 5/16”-18 threads
  • 1-1/2” tall
  • Set of 4 (nuts included)
Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
(Part #3251405)

For a limited time, Edelbrock is giving a FREE air cleaner and fender cover with the purchase of a new Edelbrock Performer or Thunder Series Carburetor! This offer is good until April 30, 2015, so act fast!

Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

This 600 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)