Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet

Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb InletEdelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

Fuel Line Kit Instruction Sheet (PDF)

You may also be interested in:

Lokar TCB-40DQ Throttle & Kickdown Cable Bracket for Edelbrock Carbs
SKU-491104
                        This slick billet aluminum bracket mounts at the back of your Edelbrock carb and makes throttle cable, return spring and kickdown cable mounting easy. Includes zinc coated allen head bolts measuring 1-1/2" in length.
  • CNC machined from 6061-T6 billet aluminum for strength and style
  • Bracket designed to fit single or dual quad carbs
  • Easy installation of Lokar Throttle Cable and Kickdown kits
  • Dual Stainless Steel Return Springs
  • All hardware and detailed mounting instructions included
  • Recommended by Edelbrock
  • Attaches to both rear and carb bolts to eliminate bracket movement
  • Bracket utilizes either bolt pattern offered on Edelbrock carbs & manifolds
Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
SKU-3258131
                        

These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 5/16" or 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

Fuel Line Kit Instruction Sheet (PDF)

Edelbrock 1479 Performer Carburetor Calibration Kit, 1405
SKU-3251479
                        

Most of the time you can bolt an Edelbrock Performer carb on your engine and it’s good to go. But if you have done a little tweaking on the engine you may need to tune it a bit. These kits include an assortment of metering rods and jets, one pair of metering rod retaining springs and a complete assortment of step-up springs.

You may want to order a 325-1477 rebuild kit also.

Lokar XTCB-40DQ Throttle Cable Bracket For Edelbrock Performer Carbs
SKU-491105
                        Throttle Cable Bracket, Manifold Mounting. For Edelbrock Performer or Performer AVS Carbs.
  • Black anodized
  • CNC machined from 6061-T6 billet aluminum for strength and style
  • Bracket designed to fit single or dual quad carbs
  • Easy installation of Lokar Throttle Cable and Kickdown kits
  • Dual Stainless Steel Return Springs
  • All hardware and detailed mounting instructions included
  • Recommended by Edelbrock
  • Attaches to both rear carb bolts to elminate bracket movement
  • Bracket utilizes either bolt pattern offered on Edelbrock carbs and manifolds
Edelbrock 8089 Carburetor Fuel Line Banjo Fitting, 3/8 Inch
SKU-3258089
                        

This banjo fitting from Edelbrock features an inlet fitting that is a must-have accessory when installing or tuning your Edelbrock carburetor. These fittings are for Edelbrock Square-Bore and Carter AFB carburetors. Each is manufactured from quality material and sold individually.

  • Fitting End A: 5/8"-20
  • Fitting End B: 3/8"
  • Wrench Type: Hex 
  • For 5/16" fuel line


Inline Fuel Pressure Adapter, -6 AN to -6 AN w/ 1/8Inch NPT, Blue
SKU-6177000
                        

Use for inline pressure port.

Fitting Thread Application Chart (GIF)

Inline Fuel Pressure Adapter, -6 AN to -6 AN w/ 1/8Inch NPT, Black
SKU-61770001
                        

Use for inline pressure port.

Fitting Thread Application Chart (GIF)

Aluminum Flare Union Adapter Fitting, Blue, -6 AN
SKU-6176035
                        

Aluminum 37° flare AN union fitting. Blue anodized finish.

Fitting Thread Application Chart (GIF)