Edelbrock 5419 1955-86 Small Block Chevy 3-Deuce Intake Manifold

							                        

                                                        
Three-carb progressive linkage for Ford/Holley 94's and Stromberg 97's. It can be modified to work with other 2G Rochester applications, however the arms must be drilled for the larger diameter shafts. 

Maximum center to center of long shaft is 11-3/8" and maximum of short shaft is 7". Linkage can be used for either two 2 bbl or three 2 bbl applications.
560-6271 Instructions (PDF) 
                                                    

						                        

							                        

                                                        
Offenhauser 3x2 tri-power manifold for 265-400 Small Block Chevy. Carb mount stud pattern is 1-7/8" x 3-1/4" (small base Rochester). 
Bosses for mounting an air conditioner compressor bracket
Hole in front to accepts an oil fill tube
HEI distributor will not fit
                                                    

						                        

							                        

                                                        
Speedway fuel blocks provide even fuel distribution for proper fuel flow to  multi-carb set-ups. This precision die cast and chrome plated fuel distribution block is designed for three carburetor applications. Fuel log has a single 3/8" NPT fuel inlet with three 1/4" NPT outlets. T-block mounts to your firewall with screws.
Don't forget to order the suggested hose barb fittings to complete your  set-up! For a positive seal, use thread sealing tape on the threads.
                                                    

						                        

							                        

                                                        
There's nothing cooler than a TriPower on your small block, but man are the carbs expensive and hard to find! With this kit you can use three junkyard 2G small base style Rochester carbs and put together a three deuce set-up for a fraction of the cost.  Includes two rebuilt bases for the secondary carbs, gaskets, jets, power valve and modified piston, idle tubes, plugs, hardware and new primary throttle shaft and butterflies. This kit includes an adjustable progressive linkage kit.
910-11569 Instructions (PDF)

                                                    

						                        

							                        

                                                        A practical embellishment for the top of your the  Rochester 2-G (2-5/8" dia.) carb. Precision machined of premium aluminum  alloy to fit solidly - secured with a stainless set screw. Each comes  with our all stainless mesh Bug Dome to keep the big stuff out of your  carb. Critters, small stones, loose screws, etc., are not healthy  additives for your engine. The Bug Horn stands only 2" tall, for low  hood clearance considerations. Available in a polished  satin finish.
Polished satin finish
Fits Stromberg, Holley, Ford, and Rochester 2 barrel carbs
Stainless bug dome included
Secured with a stainless set screw
2" Tall
Also available to fit Stromberg, Holley, Ford, and Rochester 2 barrel carbs 
We include a 1/4-20 mounting screw 
                                                    

						                        

							                        

                                                        A practical embellishment for the top of your the  Rochester 2-G (2-5/8" dia.) carb. Precision machined of premium aluminum  alloy to fit solidly - secured with a stainless set screw. Each comes  with our all stainless mesh Bug Dome to keep the big stuff out of your  carb. Critters, small stones, loose screws, etc., are not healthy  additives for your engine. The Bug Horn stands only 2" tall, for low  hood clearance considerations. Available in an unpolished  satin finish.
Unpolished satin finish
Fits Stromberg, Holley, Ford, and Rochester 2 barrel carbs
Stainless bug dome included
Secured with a stainless set screw
2" Tall
Also available to fit Stromberg, Holley, Ford, and Rochester 2 barrel carbs 
We include a 1/4-20 mounting screw 
                                                    

						                        

							                        

                                                        Classical finned design, accentuated by "doming"  the top for more definition. Fits 2-5/8" Diameter carburetors. Featuring  our exclusive new Platinum Series filter in the low  profile 2" height. This is the filter that "sparkles" in the sunlight.  The fittings are cast from premium aircraft grade aluminum, which takes a  higher than normal shine. All visible surfaces are polished - others  may only polish the raised areas. The base casting is precision bored,  with an internal shoulder to snugly fit your carburetor - not simply  "cast to fit" as others may do. Our internal shoulder also keeps the  cleaner from rocking around. Compare our features, we come out shining.

Fits type 94,97, and 98 carbs, securing with a stainless socket set screw.
Polished
Fits type Rochester 2G carbs
Secures with 1/4"-20 hardware
                                                    

						                        

							                        

                                                        Great retro design - reminiscent of baby hub caps.  Fits 2-5/8" diameter carburetors. Featuring our exclusive new Platinum  Series filter in the low profile 2" height. This is the  filter that "sparkles" in the sunlight. The fittings are cast from  premium aircraft grade aluminum, which takes a higher than normal shine.  All visible surfaces are polished - others may only polish the raised  areas. The base casting is precision bored, with an internal shoulder to  snugly fit your carburetor - not simply "cast to fit" as others may do.  Our internal shoulder also keeps the cleaner from rocking around.  Compare our features, we come out shining.
Polished
Fits type Rochester 2G carbs
Secures with 1/4"-20 hardware
                                                    

						                        

							                        

                                                        Our bold new Aero series air cleaner is inspired by  a great design from the '40's - the radiator cap of the Ford farming  tractor. On a multiple carb setup, these babies overlap each other in a  way that screams motion, even when parked. Some vintage designs are just  too good not to revisit. Fits 2-5/8" diameter carburetors. Featuring  our exclusive new Platinum Series filter in the low  profile 2" height. This is the filter that "sparkles" in the sunlight.  The fittings are cast from premium A-356 aircraft grade aluminum, which  takes a higher than normal shine. All visible surfaces are polished -  others may only polish the raised areas. The base casting is precision  bored, with an internal shoulder to snugly fit your carburetor - not  simply "cast to fit" as others may do. Our internal shoulder also keeps  the cleaner from rocking around. Compare our features, we come out  shining.
Polished
Fits type Rochester 2G carbs
Secures with 1/4"-20 hardware
                                                    

						                        

							                        

                                                        Now, a downscale match to our popular Mohawk 4  barrel air cleaner - and the Rocket Strip valve covers. Cast from A-356  aircraft grade alloy and finished to show standards. Each comes with our  2"X4" Platinum Series filter for practicality and  appearance. All visible surfaces are polished - others may only polish  the raised areas. The base casting is precision bored, with an internal  shoulder to snugly fit your carburetor - not simply "cast to fit" as  others may do. Our internal shoulder also keeps the cleaner from rocking  around. Compare our features, we come out shining.
Polished
Fits type Rochester 2G carbs
Secures with 1/4"-20 hardware
                                                    

						                        

							                        

                                                        
Designed for Rochester Tri-Power.  Kit includes stainless steel throttle cable bracket and stainless steel springs.  Stainless bracket mounts  under rear carburetor on Rochester 3-2 set-up.  Cables operate from  center carburetor.  Stainless bracket and dual stainless springs are  used to mount Lokar's throttle cable and kickdown assemblies.
For Rochester Tri-Power
Includes stainless steel throttle cable bracket and stainless steel springs
Mounts  under rear carburetor on Rochester 3-2 set-up
Cables operate from  center carburetor