Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®


Moroso 71605 Quarter Turn Fastener Dimple Tool

SAME DAY SHIPPING! Most orders ship within 24 hours.

Moroso 71605 Quarter Turn Fastener Dimple Tool

Click image to enlarge



Q & A

What's in the Box

If you use 1/4-turn type fasteners, you will need one of these dimple dies. This simple dimple die tool countersinks sheetmetal to allow the fasteners to be installed. 

  • Ideal for sinking flush-mount quick fasteners
  • The two piece steel tool dimples a single metal panel using one end and a double panel using the other
  • Zinc plated
  • Center hole is .416"
  • Overall dimple area is .866"
  • 1 tool per package

Measurement Guide (Link)

You may also be interested in:

Transfer Punch for Quarter Turn Fasteners
(Part #91089419)

Slip this over the spring, hold the panel up in place and tap lightly with rubber hammer. You now have a mark to drill for the fastener.

Measurement Guide (Link)