Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Dynatech IMCA Modified Headers, Angled Adj, 1-5/8 - 1-3/4, 3 Collector

SAME DAY SHIPPING!

Specs
Material Type:
Steel
Sold in Quantity:
Pair
Finish:
Painted
Tube O.D.:
1.63
Port Height:
1.50
Port Width:
1.34
Flange Thickness:
.25
Flange Style:
Square Port
Collector Diameter :
3.00
Gasket(s) Included:
Yes
Hardware Included:
Yes
Drivers Side Dimension A:
31.75
Drivers Side Dimension B:
8.10
Drivers Side Dimension C:
22.00
Passenger Side Dimension A:
21.50
Passenger Side Dimension B:
8.10
Passenger Side Dimension C:
27.00
Collector Length:
7.50
MFG. Part #:
701-10110
Garage Sale:
No

Share by Email

From
To

Click image to enlarge

X

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

  • Fits angle or straight plug heads
  • For Standard Chevy or Crate Engine applications
  • Gaskets, bolts and hardware included

Header Dimension Chart

Item Details

*Adjustable design for a variety of chassis
Tube Size: 1.625-1.750 / Coll.: 3.0

You may also be interested in:

Speedway Small Block Chevy IMCA Headers
                        

Speedway Motors saves you money with our new headers! Available for Small Block Chevy (SBC).  Includes gaskets and header bolts.

Header Dimension Chart

Schoenfeld Headers Small Block Chevy Adjustable IMCA Long Headers
                        

S/B Chevy adjustable IMCA headers feature a long primary stepped header, 1-5/8" - 1-3/4" S/B Chevy.  3" collector.  One 90° turnout and one 60° turnout.

Adjustable length to allow for engine and/or footbox location, as well as power band tuning.  Includes gaskets and bolts for headers.

Header Dimension Chart

 

Schoenfeld Small Block Chevy IMCA Headers, 1-5/8 Primary, 3 Inch Collector
                        

These S/B Chevy IMCA headers fit most IMCA modified chassis. Can be run upside down to gain clearance. Good choice for tracks requiring mufflers. For standard port S/B Chevy heads. Gaskets and bolts included. 

Header Dimension Chart

Schoenfeld Small Block Chevy IMCA Headers, 1-3/4 Primary, 3-1/2 Collector
                        

These S/B Chevy IMCA headers fit most IMCA modified chassis. Can be run upside down to gain clearance. Good choice for tracks requiring mufflers. For standard port S/B Chevy heads. Gaskets and bolts included. 

Header Dimension Chart

Harris Small Block Chevy Adjustable IMCA Long Headers
                        

S/B Chevy adjustable IMCA headers feature a long primary stepped header, 1-5/8" - 1-3/4" S/B Chevy.  3" collector.   Two 90° turnouts, Standard port.

Adjustable length to allow for engine and/or footbox location, as well as power band tuning.  Includes gaskets and bolts for headers.

Header Dimension Chart

Dynatech® Chevy Street Stock Headers, 1.625 Primary, 3 Inch Collector
                        

Fits Following Models: Camaro ('70-'81). Chevelle ('64-'77), Monte Carlo ('72-'77) & Chevy II Nova ('75-'79)

  • Fits in stock location or with additional engine setback
  • For Standard Chevy or Crate Engine applications
  • Designed for straight plug heads only
  • Clears stock clutch linkage
  • Gaskets, bolts and hardware included

Header Dimension Chart

Dynatech® Mod Tri-Y Headers, Harris, Hoffman, Impressive, J Car, Pierce
                        
  • Tri-Y design promotes significant low-end & mid-range torque gains without sacrificing high-end horsepower
  • Fits angle or straight plug heads
  • For Standard Chevy or Crate Engine applications
  • Gaskets, bolts and hardware included

Header Dimension Chart

Dynatech® IMCA Modified Headers, Straight Adj, 1-5/8 - 1-3/4, 3 Collector
                        
  • Fits angle or straight plug heads
  • For Standard Chevy or Crate Engine applications
  • Gaskets, bolts and hardware included

Header Dimension Chart

Dynatech® IMCA Modified Headers, 1-3/4 Primary, 3.5 Inch Collector
                        
  • Fits angle or straight plug heads
  • For Standard Chevy or Crate Engine applications
  • Gaskets, bolts and hardware included

Header Dimension Chart

Dynatech® IMCA Modified Headers, 1-5/8 Primary, 3 Inch Collector
                        
  • Fits angle or straight plug heads
  • For Standard Chevy or Crate Engine applications
  • Gaskets, bolts and hardware included
Left Side Crash Replacement IMCA Modified Header, 1-5/8 to 1-3/4 Inch Adjust.
                        

Left hand side crash replacement headers for IMCA Modified adjustable design.

Tube size: 1-5/8" to 1-3/4" 

Application: Small Block Chevy 

Right Side Crash Replacement IMCA Modified Header, 1-5/8 to 1-3/4 Inch Adjust.
                        

Right hand side crash replacement headers for IMCA Modified adjustable design.

Tube size:  1-5/8" to 1-3/4"

Application: Small Block Chevy