Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Wilwood 150-9766K Dynapro Brake Pads for Aluminum Rotor

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Overall Height:
2.32
Overall Width:
1.98
Sold in Quantity:
Set
Overall Thickness:
.50
MFG. Part #:
150-9766K
Garage Sale:
No
Notes
Set of four.
Wilwood 150-9766K Dynapro Brake Pads for Aluminum RotorWilwood 150-9766K Dynapro Brake Pads for Aluminum Rotor
Wilwood 150-9766K Dynapro Brake Pads for Aluminum Rotor

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

Specifically designed compound for use with aluminum rotors. Offers low abrasion on both un-anodized and anodized surfaces. Medium friction compound with good cold response.

  • Light Duty for Sprint, Midget, etc… Dirt or Pavement
  • Moderate friction on Aluminum Rotors without damage
  • Moderte wear rate
  • Moderate friction on Aluminum Rotors without damage
  • Sold in set of 4 pads

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

 

Specs

  • Width:  1.98"
  • Height:  2.32"
  • Thickness:  .49"    
  • Area(in²):  3    
  • Volume(in³):  1.1     
  • Beded:  No
  • Peak Temperture Rating:  700° F

Item Details

Wilwood # 150-9766K
Sold in set of 4 pads.

You may also be interested in:

Heat Shield For 2 Inch Single Quick Change Pads
SKU-94031043
                        

Made for Ultra Lite Brakes 100 Series Floating Caliper. Heat shield is .065" thick.

Garage Sale - Wilwood 150-2390 Gator Brake Pad
SKU-8352390
                        

Clearance!! 

 NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

  • .450" thick, 1.97" long, 589 A Compound
  • Medium friction, low to medium temperarture range.                       
  • Good cold torque response.
  • Low to moderate wear rate

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brochure (PDF) 

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

8352390 (PDF) 

Wilwood 15B-9819 Poly-B 10 Brake Pad
SKU-8353990
                        

For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

  • .450" thick, 1.97" long, 589 A Compound
  • Medium friction, low to medium temperarture range.                       
  • Good cold torque response.
  • Low to moderate wear rate

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brochure (PDF) 

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

Brake Pad Characteristics (PDF) 

Wilwood 15Q-10144 Poly-Q Brake Pad
SKU-8356823
                        

For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

  • .450" thick, 1.97" long, 589 A Compound
  • Medium friction, low to medium temperarture range.                       
  • Good cold torque response.
  • Low to moderate wear rate
  • Best for aluminum rotors

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brochure (PDF) 

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

8356823 Instructions (PDF)  

Wilwood 150-9756 Full Metallic Brake Pad, Coated
SKU-8358272
                        

For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

  • .450" thick, 1.97" long, 589 A Compound
  • Medium friction, low to medium temperarture range.                       
  • Good cold torque response.
  • Low to moderate wear rate

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brochure (PDF) 

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

Speedway 156 Hard Brake Pad
SKU-9191566
                        

For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

.450" thick, 1.97" long, 589 A Compound

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

 

Speedway 338 Medium Brake Pad
SKU-9193385
                        

For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

.450" thick, 1.97" long, 589 A Compound

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

 

Ultra Lite Brakes UL-104-F Single Quick Change Pad
SKU-94031017
                        

For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

.485" thick, 1.97" long, 589 A Compound

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

Wilwood 120-9689 Dynapro Single Caliper, DPS, 3.75 Inch Mount 1.75/.38
SKU-8351209689
                        

The Dyna Pro Single (DPS) billet caliper is the newest generation of calipers available as an upgrade or replacement for applications previously using the Dynalite Single (DLS) series. DPS calipers combine superior strength with performance enhancements to make these the best "Dyna" series calipers ever.

The DPS is loaded with exclusive Wilwood performance enhancements. The calipers feature Quick-E-Clip pad retainers that support a 6812 type brake pad from the top. In addition to past pad service without caliper removal, the feature provides substantially stronger retention over the single Quick-Clip pin and 7012 type pads used in the previous DLS models.

  • Quick-E-Clip pad retainers supports brake pad from top
  • Heavy wall stainless steel pistons
  • Stainless steel SRS bridge plates eliminate pad rattle and dampen vibration
  • Internal fluid passages
  • Four corner bleed screws allow mounting in any front, rear, left, or right side position

8351209689 Instructions (PDF)

 

Wilwood 150-9756K Dynapro Brake Pads for Titanium Rotor
SKU-8359756
                        

These high-temperature racing pads manufactured by Wilwood measure .5" in thickness, 1.98" in width and 2.32" in height.

  • High friction throughout temperature range, High temperature range.
  • Formulation specific for use with Polymetalic coated rotors
  • Sold in set of 4 pads

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

Wilwood 15E-9820K Dynapro Poly-E Brake Pads
SKU-8359820
                        
Performance Characteristics
 
  • Medium friction, high effective temperarture range in medium temperature pad group.
  • Smooth engagement, Flat torque curve
  • Low wear rate
  • .500" Thick
  • Sold in set of 4 pads

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brochure (PDF) 

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

AFCO 1251-1000 C1 Pads, F33i/DL/Mini Grand National
SKU-10612511000
                        

The C1 brake pad compound was designed and developed to meet the braking needs of medium to high temperature racing applications. As brake system temperatures quickly increase and decrease, C1 provides consistent performance while remaining fade resistant. C1 has proven to be extremely rotor friendly and provides exceptional pad life without requiring lengthy pad break-in (bedding) procedures.

C1 is widely used in dirt track racing and is the ultimate pad for all medium temperature applications. Recommended temperature use: 400-900 degrees.  

  • High torque with excellent control qualities
  • User friendly/easy break-in
  • Exceptional pad and rotor wear
  • Made in the U.S.A.
  • Sold as a set of 4

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

Wilwood 120-10188 Dynapro Single Lightweight Caliper, 3.25 Inch Mount
SKU-83512010188
                        

The Dyna Pro Single (DPS) billet caliper is the newest generation of calipers available as an upgrade or replacement for applications previously using the Dynalite Single (DLS) series. DPS calipers combine superior strength with performance enhancements to make these the best "Dyna" series calipers ever.

The DPS is loaded with exclusive Wilwood performance enhancements. The calipers feature Quick-E-Clip pad retainers that support a 6812 type brake pad from the top. In addition to past pad service without caliper removal, the feature provides substantially stronger retention over the single Quick-Clip pin and 7012 type pads used in the previous DLS models.

  • Quick-E-Clip pad retainers supports brake pad from top
  • Heavy wall stainless steel pistons
  • Stainless steel SRS bridge plates eliminate pad rattle and dampen vibration
  • Internal fluid passages
  • Four corner bleed screws allow mounting in any front, rear, left, or right side position

835-12010188 Specs (Link)

Aluminum Brake Pad Spacers
SKU-94031046
                        

Get the most out of your worn brake pads! Place these aluminum plates between the caliper piston and the pad. This allows the piston to stay more firmly seated while using the remainder of the pad surface. For calipers with 2" pads. Specify thickness of .050" or .125".

Compatible with calipers 835-1202498, 835-1209689, 835-1204062, and 940-31014*.

* If used with 940-31014 the center hole must be drilled out to 3/16" for pin.