Drum Brake Residual Pressure Valve, 1/8 NPT, 10 PSI
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A redesidual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 10 PSI residual valve is installed inline between the master cylinder and drum brake wheel cylinders to keep 10 PSI of residual pressure at the wheel cylinder after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal.
Valve is 1/8" NPT male on the inlet side and 1/8" NPT female on the outlet side. Use 10 PSI residual valves for drum brake applications only.
Brake System Builder's Tip (Link)
Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection.
More Like This
Disc Brake Residual Pressure Valve, 1/8 NPT, 2 PSI
Wilwood 260-13707 Drum Brake 10 PSI Residual Pressure Valve, Red
Speedway Drum Brake Residual Valve, 10 PSI, Purple
Speedway Drum Brake Residual Valve, 10 PSI, Polished
Wilwood 260-13706 Residual Pressure Valve, 2 PSI, Blue
Wilwood 260-13784 Red 10 PSI Residual Pressure Valve with Fittings
Speedway Disc Brake Residual Valve, 2 PSI, Purple
Speedway Disc Brake Residual Valve, 2 PSI, Polished
Wilwood 260-13783 Blue 2 PSI Residual Pressure Valve with Fittings