Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Dougs Headers H1130 Exhaust Cut-Out Hook-Up Kit, 2-1/2 Inch

SAME DAY SHIPPING!

Specs
Material Type:
Steel
Overall Height:
3.86
Overall Width:
6.75
Overall Length:
9.00
Sold in Quantity:
Pair
Finish:
Zinc
Tube O.D.:
2.50
Mounted Length:
5.00
Flange Thickness:
.24
Bolt Hole Pattern:
3 on 3.04"
Gasket(s) Included:
Yes
Hardware Included:
Yes
MFG. Part #:
H1130
Garage Sale:
No
Notes
Includes block off plates and clamps. 42 degree angle. Cut out length is 4.00" Expanded ends are 2.00" long on both sides.

Share by Email

From
To

Click image to enlarge

X

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Avoid an expensive trip to the muffler shop by using this cut-out hookup kit when installing our electric exhaust cut outs. Some fabrication required but no welding nescessary. Kits are sold as a pair and come with mounting hardware.

These hook-up kits are made for our electric cut-outs but can be used for other applications.

  • Overall length of pipe = 9.00"
  • Length of stepped pipe splicing into exhaust = 2.00" each side
  • Center pipe length (between stepped pipes) = 5.00"
  • Cut out length (center of weld to edge of flange) = 5.50"
  • 40.4 degree angle

Specs

You may also be interested in:

Steel Exhaust Collector Ring, 3 Inch
                        Mild steel flanges can be welded to exhaust pipes, mufflers or header collectors so your exhaust system can easily be unbolted and removed. Flanges are 1/4" thick and feature the common 3-bolt mount pattern.
                    
Dougs Headers H1132 Exhaust Cut-Out Hook-Up Kit, 3 Inch
                        

Avoid an expensive trip to the muffler shop by using this cut-out hookup kit when installing our electric exhaust cut outs. Some fabrication required but no welding nescessary. Kits are sold as a pair and come with mounting hardware.

These hook-up kits are made for our electric cut-outs but can be used for other applications.

  • Overall length of pipe = 10.00"
  • Length of stepped pipe splicing into exhaust = 2.00" each side
  • Center pipe length (between stepped pipes = 6.00"
  • Cut out length (center of weld to edge iof flange) = 7.50"
  • 36.7 degree angle
Dougs Headers H1134 Exhaust Cut-Out Hook-Up Kit, 3-1/2 Inch
                        

Avoid an expensive trip to the muffler shop by using this cut-out hookup kit when installing our electric exhaust cut outs. Some fabrication required but no welding nescessary. Kits are sold as a pair and come with mounting hardware.

These hook-up kits are made for our electric cut-outs but can be used for other applications.

  • Overall length of pipe = 12.00"
  • Length of stepped pipe splicing into exhaust = 2.00" each side
  • Center pipe length (between stepped pipes = 8.00"
  • Cut out length (center of weld to edge iof flange) = 9.50"
  • 31.4 degree angle
Dougs Headers DEC250A Stainless Steel Electric Exhaust Cutouts-2.5 In.
                        These rugged Doug's Headers electric exhaust cutout  kits allow you to convert to a wide-open, unobstructed exhaust system  with the flip of a dash-mounted switch. Doug's electric exhaust cutouts  are built to last; they feature full stainless steel construction with a  heavy-duty Dayton gear reduction rack and pinion electric drive  mechanism. Best of all, these cutouts use a self-cleaning, knife-edge  seat for a leakproof seal every time, whether open or closed. Doug's  Headers electric exhaust cutouts include a pre-wired harness, a toggle  switch, and fuses for an easy installation.
  • 2.500 in.
  • Stainless steel
  • Sold as a pair
  • Includes wiring harness
Dougs Headers DEC250AK Steel Electric Exhaust Cut-Out Kit, 2.5 Inch
                        

Nothing gets a gearhead excited like the sound of open headers. Now you can uncork your exhaust with the push of a button. Watch the heads turn as within seconds your hotrod goes from mild...to wild! Dougs Headers electric cutouts offer superior design and function.

  • 304 stainless steel construction
  • High torque 12 Volt DC gear reduction motors
  • Self adjusting, self cleaning gate for leak proof seal
  • Zero obstructions when fully open
  • Harness pre-wired for easy installation
  • Reduced size permits greater installation options
  • Includes wiring harness, gaskets and hardware
  • Cutout kits included Y-pipe & band clamps for simple installation