Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Double Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Double Taper

Specs
Material Type:
Steel
Sold in Quantity:
Each
Thread Pitch:
7/16
Double Sided:
Yes
Garage Sale:
No
Double Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Double Taper

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.  Double-sided 45° seat design for quick and secure fastening.

You will need a 1" hex (6-sided) socket. 

7/16" Fine Thread fits most GM mid-size cars.

  • 45° taper
  • 7/16" RH Fine Thread, Double Taper

What's The Angle
Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

 

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

major county muscle
Verified Purchaser
Verified Reviewer
fairview, ok

easy to start in the dark, easy to find when dropped in dirt

May 09, 2015
color makes easier to see in dirt or dark
Pros:
  • Easy Start Fast Install
  • Prevents Hole Pull Out
Cons:
  • Must Have 1" Socket
  • Because Of Taper
  • Must Use With Racing Rim
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Single Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Single Taper
(Part #91003911)
                        

Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.

You will need a 1" hex (6-sided) socket. 

7/16" Fine Thread fits most GM mid-size cars.

  • 45° taper
  • 7/16" RH Fine Thread, Single Taper

What's The Angle
Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

 

AFCO 10149 1 Inch Hex Steel Lug Nut, 7/16 Inch RH Fine Thread
(Part #10610149)
                        

Use these oversized AFCO 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts. 

You will need a 1" hex (6-sided) socket. 

7/16" Fine Thread fits most GM mid-sized cars.

  • 45° taper
  • 7/16" RH Fine Thread, Single Taper

What's The Angle
Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

 

Currie 95304 7/16 x 1-11/16 Inch Wheel Stud
(Part #91095304)
                        

This wheel stud manufactured by Currie Enterprises is made from a high strength steel. Its press-in design makes it stronger than stock.

  • Press-In Design
  • .610 Knurl
  • Stonger than stock
  • Sold each 

Moroso 46160 Wheel Studs, 7/16-20 x 2-7/8 Inch, .560 In Knurl
(Part #54546160)
                        

These wheel studs manufactured from Moroso are made of a high strength steel. Their press-in design makes them stronger than stock. These wheel studs are sold in sets of 5.

  • Exceeds sanctioning bodies requirements on the use of extra-long wheel studs with thick-hub racing wheels
  • Manufacturing from high grade SAE 8740 steel to withstand sheet loads of 190,000 psi (which exceeds Grade 8 specifications)
  • 5 per package
  • Made in the U.S.A.
  • All stud lengths are measured from the base of the knurl to the end of the stud.
  • 0.560" knurl dia. for standard hole size 0.552" to 0.559"
  • 7/16" threads
  • 2-7/8" length
  • Fits many late model GM disc brake and early drum brake applications
Moroso 46150 Press-In Wheel Studs, 7/16-20 x 2-7/8 Inch, .480 In. Dia
(Part #54546150)
                        

This wheel stud manufactured from Moroso is made of a high strength steel. Its press-in design makes it stronger than stock. These wheel studs are sold in sets of 5.

  • Studs are longer than sanctioning bodies require for the use of extra-long studs with thick-hub racing wheels
  • Constructed from SAE 8740 Steel to withstand sheet loads of 190,000 psi (which exceeds Grade 8 specifications)
  • Fits: Most late model GM drum brake applications
  • Standard hole size: .472" to .479"
  • 5 per package
  • Made in the USA!

Note: All stud lengths are measured from the base of the knurl to the end of the stud.

Industrial Tap, 7/16 Inch-20 SAE, Right Hand Thread
(Part #91281033)
                        

We supply those hard-to-find industrial taps. 4-flutes.

Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.