Deluxe Street Stock Roll Cage Kit

							                        

                                                        
Take a hit to your door? No problem. Just order this kit which includes enough 1-3/4" diameter, .104" wall HREW mild steel tubing to replace your door bar. 
Not assembled
Enough bars for one side of the car
Total length is 45" on the long end and 32" on the short
7" wide and 7" from the elbow to the end 
                                                    

						                        

							                        

                                                        One of our 'must have' books for any fabrication shop. This book covers welding techniques for welding Chromoly, aluminum, magnesium and stainless steel.  160 pages.
                                                    
						                        

							                        

                                                        
All street stock roll cage kits are pre-bent 1-3/4" diameter .104 wall HREW 1020 mild steel tubing. We have found that the tubing manufacturers are quite inconsistant on actual wall thickness. Some .095" wall tubing was coming in at .088". That's why Speedway uses .104" wall tubing, so that manufacturer inconsistencies will not leave you with an illegal cage! Tubing is pre-notched where needed for easy assembly. Some notching is still required. Includes instruction sheet.
You must specify year, make and model of car in the comments section when placing order.
We Pay the Freight! 
Complete frame kits are shipped freight paid with a common carrier within the 48 states (not in Alaska or Hawaii). They have to be shipped to a business address to receive free freight. It can be shipped to a residential address for a $60 fee. Please be sure to provide a business name and address in the shipping field if going to a business. Cage kits will ship within approximately 2-3 days.
Get in a wreck? Use replacement front engine bar kit 916-73021 or replacement door bar kit 916-73020 to fix the damage. You can purchase the Super Deluxe Kit (best buy), plus separate door bars or front engine bars kits.
916-73010 Instructions (PDF)
                                                    

						                        

							                        

                                                        
MIG Welding is widely used for car and motorcycle building and modification, but few people really understand how each of the variables affects the finished weld. This program can be easily understood by a beginner, but it covers information even seasoned professionals can learn from. Ron Covell goes through the entire process step-by-step, and gives clear descriptions of how each factor changes the weld, including wire speed, voltage, wire stickout, gun angle, travel speed, and gas flow. He also covers plug welds, patch panels, welding aluminum, and using flux core wire. You'll especially enjoy the special bonus section on Plasma Cutting!
70 Minutes 
                                                    

						                        

							                        

                                                        TIG welding has been long recognized as the premiere welding process, which can make beautiful, strong welds on nearly any metal. In this easy-to-follow program, Ron Covell covers the basic processes used for TIG welding, covering proper machine setup, joint preparation, electrode selection and preparation, torch technique, and perhaps most importantly, what to check for when things go wrong! Ron's thoughtful description of the welding process, coupled with the close-up photography that brings the action into clear view makes the seemingly difficult process of TIG welding easy to understand.

80 Minutes 
                                                    
						                        

							                        

                                                        
Replacement front engine bar kit. Split front hoop. Tubes come pre-notched on  one end, cut and notch other end to fit your application. 
Ships UPS.
                                                    

						                        

							                        

                                                        
All street stock roll cage kits are pre-bent 1-3/4" diameter .104 wall HREW 1020 mild steel tubing. Tubing is pre-notched where needed for easy assembly. Some notching is still required.
We have found that the tubing manufacturers are quite inconsistant on  actual wall thickness. Some .095" wall tubing was coming in at .088". That's why Speedway uses .104" wall tubing, so that manufacturer inconsistencies will not leave you with an illegal cage! 
The kit also includes: 
1-3/4" diameter .104 wall HREW 1020 mild steel tubing
Some notching is required
Instructions
 

                                                    

						                        

							                        

                                                        
Durable, light weight material is corrosion resistant and flame retardant
Ultra high performance filters protects against UV & IR
Automatically changes from a light to a dark state when arc in struck
Returns to normal when welding stops w/dark to clear adjustments available
Variable shades from DIN 9 to DIN 13
Outside sensitivity adjustments provide clear vision both prior and during welding
Special turnover headband mechanism allows for greater comfort and reduces fatigue
Utilizes high performance solar cells w/2 built-in 3V lithium batteries as power back-up
Complies with DIN, ISO, EN safety standards and ANSI Z87.1-2003 standards
Replacement Lenses: 4.5 x 3.5"