Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Deluxe Hi-Volume Small Block Chevy Oil Pump

SAME DAY SHIPPING! Order within the next 10 hours 30 minutes and receive same day shipping

Specs
Material Type:
Steel
Sold in Quantity:
Each
Oil Pump Volume:
High Volume
Oil Pump Pressure:
High Pressure
Inlet Size:
.63
Notes
Includes (3) pressure relief springs: 55 PSI (installed), 65-70 PSI (orange), 80-90 (yellow). Also includes a steel sleeve for the oil pump drive.
Deluxe Hi-Volume Small Block Chevy Oil Pump

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

This oil pump has all its components hand picked and fit to make it the best. The nickel body and end plate have been machined to balance the pressure at all rpms which also reduces cavitation and increases longevity. Includes three pressure springs and a steel oil pump driveshaft sleeve.

For Small Block Chevy V-8. Use 5/8" pick-up tube.

Item Details

Use 5/8" pick-up tube

Notes

  1. Comes with (3) pressure relief springs:
    • 55 psi - installed in pump
    • 65-70 psi - (orange) in the box
    • 80-90 psi - (yellow) in the box
  2. This pump is the same depth as a typical SBC high volume pump and the cover has been modified to avoid cavitation of the oil.
 

Customer Reviews

This product has no reviews.

Product Q&A

1 questions : 1 answers

1 answers

Who is the manufactuer of this pump?..the picture looks to be stamped as a Melling M55HV but I saw information that Melling does no recommend the M55HV for racing applications? Plesae provide any further technical information..and or descriptions.

Rkfdspeed
Rockford,Il crossroads of the World!
February 23, 2015

Who is the manufactuer of this pump?..the picture looks to be stamped as a Melling M55HV but I saw information that Melling does no recommend the M55HV for racing applications? Plesae provide any further technical information..and or descriptions.

Answers

February 23, 2015
EricM
This is not a Melling pump, this is our own Speedway oil pump. The Melling pump with high quality gears and casting material is the Melling Select pump part number 57710550.
Page 1 of 1

You may also be interested in:

ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
(Part #101RPS1)
                        For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.
                    
Pickup for Stock Small Block Chevy Oil Pump
(Part #91715135)
                        

Oil pump pickups are designed to work with our claimer pans. Includes mounting tab.

This pick up is designed for a stock 5 quart pan that is 7-1/4" deep

Melling 10550 Select Small Block Chevy Oil Pump, High Volume
(Part #57710550)
                        

Melling Select Series oil pumps are engineered to give you superior oiling for your high performance engine. 5/8" pickup required.

  • Steel billet gears with drive gear pinned to shaft
  • CNC machined housing and cover plate
  • Coated for wear and corrosion resistance
  • 5/8" inlet

Available in standard volume or high-volume, which has 25% more volume.

Item Details

25% more volume
Small Block Chevy Copper Oil Pump Mounting Gaskets
(Part #577G55)
                        

Does your oil pump leak where it mounts to the main cap? Not anymore with our dead soft copper oil pump mounting gaskets.

Bag of 3 gaskets.

Melling 10552ST High Volume SB Chevy Oil Pump, 5/8 Inch, Stage 2
(Part #57710552)
                        

These High Volume performance oil pumps feature 10% increase in flow over stock using Melling's exclusive helical asymmetrical pump gears with patented out-board shaft support. The design of the gears provides for a significant reduction in the pressure ripple (pulsing) found in spur gear pumps. The reduction in the pressure ripple improves the wear and performance of the components assembled to the pump. The intermediate shaft and distributor gear wear will be reduced along with improvements in the performance of the distributor, less spark scatter. The patented out-board shaft supports allow the drive and idler shaft to be extended into the cover for additional support. The additional support eliminates dynamic shaft defection at increased RPM levels causing the pump to run more efficiently. Threaded valve plug retains the pressure relief spring thus eliminating the retaining pin. Included with the pump is the 12550 Chrome-Moly intermediate shaft with steel guide along with optional lower and higher pressure relief springs.

  • High volume output- 10% more flow than stock
  • Exclusive asymmetrical helical gears with patented outboard shaft supports in cover
  • Significant reduction in pressure ripple (pulsing)
  • Reduction in torque ripple in pump drive
  • Improved distributor operation
  • Reduction in spark scatter
  • Improved distributor gear and intermediate shaft wear
  • Includes 12550 chrome-moly intermediate shaft with steel guide
  • Uses 5/8" diameter bolt-on or press fit screen
  • For Small Block Chevy engines
Melling 10550ST High Volume SB Chevy Oil Pump, 5/8 Inch, Stage 1
(Part #57710554)
                        

These high volume performance oil pumps feature a 25% increase in flow over stock using Melling exclusive helical asymmetrical pump gears. The design of the gears provides for a significant reduction in the pressure ripple (pulsing) found in spur gear pumps. The reduction in the pressure ripple improves the wear and performance of the components assembled to the pump. The intermediate shaft and distributor gear wear will be reduced along with improvements in the performance of the distributor, less spark scatter. Included with the pump is the 12550 Chrome-Moly intermediate shaft with steel guide along with a lower pressure relief spring.

  • High volume output- 25% more flow than stock
  • Exclusive asymmetrical helical gears
  • Significant reduction in pressure ripple (pulsing)
  • Reduction in torque ripple in pump drive
  • Improved distributor operation- reduction in spark scatter
  • Improved distributor gear and intermediate shaft wear
  • Includes 12550 chrome-moly intermediate shaft with steel guide
  • Uses 5/8" diameter press fit screen

 

Pickup For H.V. Pump, SBC
(Part #91715136)
                        

Oil pump pickup is designed to work with our claimer pans and a high volume pump with a 5/8" diameter inlet. Includes mounting tab.