Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Deluxe 1926-27 T Roadster Body w/ Doors, No Floor

SAME DAY SHIPPING! Order within the next 10 hours 4 minutes and receive same day shipping

Specs
Material Type:
Fiberglass
Overall Length:
90.00
Sold in Quantity:
Each
Garage Sale:
No
Body Width:
49.00
Body Height:
24.00
Firewall Width:
29.00
Notes
Includes doors. No floor.
Deluxe 1926-27 T Roadster Body w/ Doors, No Floor
Deluxe 1926-27 T Roadster Body w/ Doors, No Floor

Click image to enlarge

Speeday Motors Logo
X
Deluxe 1926-27 T Roadster Body w/ Doors, No Floor

Please NOTE the following about this product:

  • Item 9002705 is made to order. We will ship it from our warehouse when it is produced.

Details

Reviews

Q & A

What's in the Box

Our Deluxe '26-'27 T body includes (2) opening doors that have the latches and hinges installed. Features a molded turtle deck and firewall, inner door panles, and no foor. 

  • Total Length: 90" 
  • Firewall Width: 29"
  • Firewall to Back of Dash: 16-1/2"
  • Firewall to Back of Seat: 55"
  • Firewall to Center Line of Rear Axle: 75"
  • Widest Point of Body: 49"
  • Overall Height of Body: 24"
  • Rear Width: 42"

This product is made to order.  Please allow three to four weeks for lead time.

Truck Freight Shipping Charges Apply - click here for details

 

You may also be interested in:

Standard 1926-27 T Roadster Body w/o Doors and Floor
                        

Our Standard '26-'27 T body is a rugged, one-piece design (no doors). It features a molded turtle deck and firewall, and no foor. 

  • Total Length: 90" 
  • Firewall Width: 29"
  • Firewall to Back of Dash: 16-1/2"
  • Firewall to Back of Seat: 55"
  • Firewall to Center Line of Rear Axle: 75"
  • Widest Point of Body: 49"
  • Overall Height of Body: 24"
  • Rear Width: 42"

This product is made to order.  Please allow three to four weeks for lead time.

Truck Freight Shipping Charges Apply - click here for details

1926-27 T Lower Rear Roll Pan
                        

This lower rear roll pan mounts to the rear bottom side of the turtle deck portion of our '26-'27 T body. It rounds out the rough lower rear edge and gives a finished rear look. Easily molded onto the lower rear portion of the body to hide frame and rear suspension. Fits Speedway 1926-1927 fiberglass body only (modification required for other bodies).

  • 19" front-to-back
  • Adds approx. 2-1/2" depth to the bottom of the body 
  • 43 3/8” wide at the front 
  • 19” from front to back 
  • Bottom opening is 35 ¼ x 6 ½”
  • Pan is 3-1/8” deep or tall

This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

1926-27 T Floor Panel
                        

Our strong fiberglass floor panel fits 1926-1927 T bodies and features extra reinforcement ribs and a transmission tunnel. Also features a flange to mount our fiberglass bulkhead (bulkhead not included).

  • Overall Length: 65"
  • Width @ Front: 28"
  • Width @ Middle: 40"
  • Width @ Rear: 38.5"

Bulkhead panel 97327400 fits between rear of floor panel and body to enclose the passenger compartment.

This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. This item must be shipped by truck freight.

Truck Freight Shipping Charges Apply - click here for details

Deluxe 1927 T-Bucket Frame Kit
                        

Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size!

Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

Chassis Exploded View (Link)

This product requires a 3-4 week build time.

Deluxe 1927 T-Bucket Frame Kit w/ Deluxe Body, No Floor
                        Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size! 

Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

Doors are shipped hinged and latched, but they do require fitting and hanging onto the body by the owner.

All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

Chassis Exploded View (Link)

This product requires a 3-4 week build time.

Deluxe 1926-27 T Roadster Body w/ Doors, Unchanneled Floor Installed
                        

Our Deluxe '26-'27 Model T style roadster body includes (2) opening doors that have the latches and hinges installed. T-bucket bodies feature all fiberglass construction with a molded turtle deck and firewall, inner door panles, and a flat floor (unchanneled) installed. 

  • Total Length: 90" 
  • Firewall Width: 29"
  • Firewall to Back of Dash: 16-1/2"
  • Firewall to Back of Seat: 55"
  • Firewall to Center Line of Rear Axle: 75"
  • Widest Point of Body: 49"
  • Overall Height of Body: 24"
  • Rear Width: 42"

This product is made to order.  Please allow three to four weeks for lead time.

Truck Freight Shipping Charges Apply - click here for details.

EMPI 3046 Buggy Rear Fiberglass Bench Seat, 34-1/2 Inch x 23 Inch
                        

EMPI's fiberglass seats are made from heavy mat and finished with a durable gel coat.  They are adaptable to a wide range of applications.  For comfort and safety EMPI strongly recommends the use of their custom pre-made covers that are made specifically for these rear bench seats (141-3059).

  • Heavy mat with gel coat fiberglass construction
  • Universal for multiple applications
  • 34-1/4" Wide x 23" Top (Back of seat) to Bottom(Front of seat)
EMPI 3047 Buggy Rear Fiberglass Bench Seat, 37-3/4 Inch x 23 Inch
                        

EMPI's fiberglass seats are made from heavy mat and finished with a durable gel coat.  They are adaptable to a wide range of applications.  For comfort and safety EMPI strongly recommends the use of their custom pre-made covers that are made specifically for these rear bench seats (141-3061).

  • Heavy mat with gel coat fiberglass construction
  • Universal for multiple applications
  • 37-3/4" Wide x 23" Top (Back of seat) to Bottom(Front of seat)