DECO Laser, Only for Scale Level
Click image to enlarge
Please NOTE the following about this product:
- This product is discontinued.
Q & A
What's in the Box
Never wonder if your scales are level again! Perfect for scaling your race car, these DECO laser levels are sure to prevent inaccurate or inconsistent reads. Make sure your chassis setup is right the first time with DECO laser leveling kits. These laser systems will help you level weigh pads, roll-off pads, and drive-on setup racks with their precise and always accurate sight. Easy-to-use and professionally approved, these scale levels help you adjust all four of your vehicle scales to the same height. Improve your setups for the ultimate handling of your circle track race car, Test! - Don't Guess!, with DECO chassis tools.
- For use with DECO laser scale leveling kit 3009000
- Laser ONLY
- Provides accurate and consistent reads
- Helps to level weigh pads, roll-off pads, and drive-on setup racks
- Sold Each
This product has no reviews.
No questions have been asked.
You may also be interested in:
Intercomp 102007 Turn TablesMore InfoCompare
Intercomp 170133 Scale Pad LevelerPrice: $899.99More InfoCompare
Liquid Level with 12 Foot HoseMore InfoCompare
DECO Hydraulic Wheel Load Checker, 0-1000 PoundsPrice: $189.99More InfoCompare
Race Ramps RR-SCALE Scale Ramp PadsPrice: $158.99More InfoCompare
Proform 67649 Billet Aluminum Scale RampsPrice: $269.99More InfoCompare
Safety Racing Tire Pressure Gauge, 0-30 psiMore InfoCompare
DECO Magnetic Caster Camber Gauge, Cast AluminumMore InfoCompare
When you are setting your caster and camber you should use turn plates to correctly turn each wheel 20 degrees without scrubbing the tires. Heavy duty roller bearings make setup a snap.
Designed to fit any 15" scale with a 2.5 pad thickness. Enables the car to be rolled off the scale pad and back on with little effort. All aluminum construction.
(Set of 4 one piece roll-off levelers)
Essential to achieve accurate chassis set-up. Quick and easy, simply fill with fluid. Use for leveling scales or wheel pads. Impact resistant, two 12" containers and 12 ft. connecting hose.
Ideal for setting up your chassis, anywhere...even at the track. This compact unit delivers a quick and effective means of checking weight distribution on any race car. DECO hydraulic wheel load checkers feature a heat-treated aircraft aluminum pivoting head, bull's eye level and adjustable stand with quick release pin for easy height adjustment. Choose the best when it comes to tools for the at-home do-it-yourselfer, choose DECO chassis tools for sophisticated equipment that anyone can use, all at a price anyone can afford!
- Gauge reads from 0-1000 lbs. in 20 lb. increments
- For use on any race car from stocks and sprints to SCCA and IMSA
- Heat-treated aircraft aluminum pivoting head
- Bull's eye level
- Adjustable stand with quick release pin for easy height adjustment
300-0010 Instructions (PDF)
Let's face it, aluminum scale pad ramps get beat up and tend to be hard to store. These high tech foam ramps weight less than 3 lbs., can take a beating and are easy to store anywhere. 12" wide, 14" long and 2-1/2" tall. Set of 4.
- Black anodized billet aluminum scale ramps
- Peak height is 2 3/8”
- Set of 4
Speedway tire pressure gauges feature a steel case with large 2-1/2" diameter shatter resistant plastic face. Built-in bleeder valve and 45° swivel end. Hose is 1 ft. long.
Choose 0-15 psi, 0-30 psi, or 0-60 psi gauge.
These magnetic caster/camber gauges from DECO allow you to make precision front-end caster and camber adjustments quickly, easily, and accurately. They feature quality cast aluminum construction and are machined from both ends with lazer-etched anodized finishes for precise readings every time. DECO alignment gauges feature a fourth bubble that works as a level and spindle angle indicator. These quality gauges come with a magnetic adapter to accommodate all of your precision chassis setup needs. They also include a convienient carrying case with handle for easy transport and storage. Choose the best when it comes to tools for the at-home do-it-yourselfer, choose DECO chassis alignment tools for sophisticated equipment that anyone can use, all at a price anyone can afford!
- High-quality cast aluminum
- Measures +8° to -4° caster range, +6° to -6° camber range
- Gauge machined at both ends for easy and accurate caster settings
- Anodized and laser-etched for easy readings
- Equipped with magnetic adapter
- Includes carrying case