Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

DECO Bump Steer Gauge

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

An exclusive design, our Bump Steer Gauge features two gauges for fast, accurate readings of degree of toe-in change that occurs as the front suspension moves up and down over bumps.

Quality features include precision ground steel plate; plate level; bottle jack with adjustable height and location; adjustable height gauges.

Slotted mounting holes on plate allow use on 4 1/2" -5" BC without removing rotors. Also works with wide 5 hubs.

910-82700 Instructions (pdf)

You may also be interested in:

Video - Dirt Track Chassis Set-Up
                        Charlie Swartz covers wheels, stagger, scale use, ride height, front end alignment, springs, shocks, fine tuning at the track. 24 minutes running time. 
                    
Longacre 78320 Short Chassis Height Guage
                        

These slick chassis height guages allow you to preset the desired height and slide the guage under the car. Adjust height til the frame rail touches the end of the tape.

  • 24" for perimeter frames
  • Measures height from 2" to 10" (higher if needed)
  • Works 3 ways - with scale pads or without
Works in 3 Different Ways
  1. Car on the ground - measures chassis height directly, accurate to 1/16".
  2. Car on scale pads - measures from top of pads - ground level - to frame directly (no subracting needed here).
  3. Measures chassis height dynamically, as you work on the car. Magnet holds tape to frame. Indicator shows height as the car moves up and down. Use set of 4 to quickly see height at all 4 corners. You don't even need to bend over.

 

Longacre 78324 Long Chassis Height Gauge
                        

These slick chassis height gauges allow you to preset the desired height and slide gauge under car. Simply adjust height till frame rail touches end of tape.

  • 36" for straight rail cars on right side
  • Measures height from 2" to 10" (higher if needed)
  • Works 3 ways - with scale pads or without

Works in 3 Different Ways

  1. Car on the ground - measures chassis height directly, accurate to 1/16".
  2. Car on scale pads - measures from top of pads - ground level - to frame directly (no subracting needed here).
  3. Measures chassis height dynamically, as you work on the car. Magnet holds tape to frame. Indicator shows height as the car moves up and down. Use set of 4 to quickly see height at all 4 corners. You don't even need to bend over.