Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5

Specs
Sold in Quantity:
Kit
Outer Braid:
Stainless
Material Type:
Teflon
Outlet Fitting:
10mm-1.5
Garage Sale:
No
Overall Length:
16.00
Hose OD:
.25
Notes
DOT approved. Includes 10mm-1.5 banjo bolts/washers, 3/8"-24 IFF frame adapter fittings, and frame tabs with clips.
DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
Product Video
DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5

Click image to enlarge

Watch the video below to learn more about the differences in brake lines, flare types and fittings you may want to consider before plumbing away on your current chassis project.

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

  • Stainless steel braid over Teflon® hose
  • Reduces volumetric expansion of brake lines
  • Reduces brake fade
  • Less susceptible to debris than rubber line

Item Details

1978-Up GM with 10mm-1.5 caliper threads

Notes

  1. If using 1/4" brake line with a 7/16"-24 flare nut on your chassis, use adapter fitting # 9103183-3/8 which has a 3/8"-24 IF male and a 7/16"-24 IF female configuration.
  2. Brake System Builder Tip (GIF)

Customer Reviews

Rated 4.4 out of 5 by 14 reviewers.
RATING BREAKDOWN
14 reviews
5 Stars
10
4 Stars
2
3 Stars
1
2 Stars
0
1 Star
1
RECOMMEND THIS PRODUCT:

Tequila Bob
Verified Reviewer
Bloomfield Hills, MI

Lines are too short

October 03, 2015
I put the rear disc setup (part #91031921) on a nine inch rear end as suggested. The lines would rip out at the first 1" of travel. Thet are too short to short for an non specific application.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Tequila Bob - Thanks for your feedback! We appreciate hearing from you. Your review has been passed along to our QC and Engineering teams to review your feedback. We are really sorry for your frustration and are always happy to help.
Kevin
Verified Purchaser
Verified Reviewer
Colorado

everything flexible you need for your metric calipers

September 07, 2015
looking for approved lines for a new chassis. Going for its first vin/lic/title inspection. No numbers on these parts so I'm hoping the one piece construction is what makes them d.o.t. approvable over the 2 piece ones that are not approved.
Pros:
  • Looks Great
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Abonebuilder
Verified Purchaser

Screwed right in no problems

March 11, 2015
The catalog sold this product. Speedway gave me thread pitch while others said "metric". I was able to try a regular bolt and avoid the wrong banjo bolt.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Leerab
Verified Purchaser
Santa Fe, NM, USA

perfect fit

September 22, 2014
these lines worked out perfect,I used them on my 1929 Ford hot Rod.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

matros
Verified Purchaser

good product

September 22, 2014
used for a hot rod, and nice easy to install line and looks clean
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

coolrodgarage
Verified Purchaser
Sevierville, TN, USA

great kit

April 23, 2014
This is a great kit. All parts needed to install. Speedway is good to deal with . Great communication and very helpful.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Dyno1
Verified Purchaser
Rochester, MI, USA

Excellent product

December 29, 2012
This product came as ordered, worked perfectly with no issues.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Phastlane Garage
Verified Purchaser
West Haven, UT

Well made products

December 16, 2011
Set up on a gasser car and close to not fitting the distance. Could offer a longer version in this package that would be ideal.
Pros:
  • Lightweight
  • Easy To Install
  • Decreased Stopping Distance
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Art from FL
Verified Purchaser
Gulfport, FL

OEM may be better

August 28, 2011
These went on a Mustang II subframe conversion for a Studebaker Lark. The lenght was perfect, all small parts were included. The banjo ends seemed rather small, OEM are about twice the size with grooves cut around the bolt hole for sealing at the copper washers. This may or may not be a factor. If they leak, I'll let you know!
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Al
Verified Purchaser
Lake Havasu City Az

Nice product

May 15, 2011
I ordered the wrong one (my bad) but by the time I went to use it I had opened the package and thown the box and other paperwork away. [...]End result order another one.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

3 questions : 4 answers

1 answers

How long are these hoses? From center of banjo to the IF end. Thank you JimJ Putting Metric GM calipers on the rear of my 23 T Bucket, Ford 9 inch axle using weld on brackets, welding small tabs on the axle to mount/hold the IF ends with 3/16 tubing. Need to know the length

JimJ360
Northern Illinois
April 21, 2014

How long are these hoses? From center of banjo to the IF end. Thank you JimJ Putting Metric GM calipers on the rear of my 23 T Bucket, Ford 9 inch axle using weld on brackets, welding small tabs on the axle to mount/hold the IF ends with 3/16 tubing. Need to know the length

Answers

April 21, 2014
EricM
The 16" overall length is actually measured from center of the banjo to the end of the IFF fitting.
1 answers

I am putting 73-79 ford truck calipers on my 66 ford f100 2wd.Will this set up work for this application?

February 02, 2011

I am putting 73-79 ford truck calipers on my 66 ford f100 2wd.Will this set up work for this application?

Answers

February 08, 2011
Zach
Our Stainless brake hose kits come in several different lengths from 8" up to 19" and have different banjo bolts for different size caliper threads. I am unsure what caliper threads your ford truck calipers are. The best advice I can give is to check what thread you calipers have and we should have a banjo bolt to make this work for you.
2 answers

Will this setup bolt right up to the thru frame fitting?

Buster
Lancaster,Ky
April 28, 2011

Will this setup bolt right up to the thru frame fitting?

Answers

July 03, 2015
Eric
Expert
The thru frame fittings have 1/8NPT threads & -3AN fittings. The brake hoses you mentioned have 3/8x24 fittings on the frame end. They will not work with the thru frame fittings.
May 02, 2011
John H.
The thru frame fittings have 1/8NPT threads & -3AN fittings. The brake hoses you mentioned have 3/8x24 fittings on the frame end. They will not work with the thru frame fittings.
Page 1 of 1

You may also be interested in:

Rubber Brake Line Hose Set for 10mm-1.5 Calipers
(Part #6178569)
                        

These 15" front brake hoses are designed for 1955-1974 GM front disc brake conversions using stock-style 1969-1988 GM single-piston calipers.

Note: Hose banjo bolts sold separately.

Item Details

1955-1974 GM
Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
(Part #6178566)
                        

Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines and two banjo bolts with seals.

  • 15" length including fittings
  • 3/8"-24 IFF and 10mm-1.5
  • For 1978-1988 GM Calipers

Lines are 15" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
(Part #6178559)
                        These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
                    
Wilwood 220-12104 14 Inch Flexline Kit, 3/8-24 IF to 10mm Banjo
(Part #83522012104)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
Wilwood 220-12105 18 Inch Flexline Kit, 3/8-24 IF to 10mm Banjo
(Part #83522012105)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
Wilwood 220-12106 22 Inch Flexline Kit, 3/8-24 IF to 10mm Banjo
(Part #83522012106)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
Wilwood 220-12107 Flexline Kit, 18 Inch D154 M10BF to 10mm Banjo
(Part #83522012107)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
3/8-24 IFM to 7/16-24 IFF Adapter
(Part #9103183-3/8)
                        

Brass adapters. Select from:

  • 3/8"-24 IFM to 7/16" - 24 IFF
  • 7/16"-24 IFM to 3/8" - 24 IFF
  • 1/2"-20 IFM to 3/8" - 24 IFF
  • 9/16"-18 IFM to 3/8" - 24 IFF

Item Details

Note: "3/8" size is a 3/8"-24 IFM to 7/16"-24 IFF and the "7/16" size is 7/16"-24 IFM to 3/8"-24 IFF