Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll

SAME DAY SHIPPING! Order within the next 4 hours 43 minutes and receive same day shipping

Specs
Material Type:
Lava Rock
Overall Width:
2.00
Overall Length:
50.00
Sold in Quantity:
Each
Material Thickness:
.04
MFG. Part #:
010127
Garage Sale:
No
DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll
DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll

Click image to enlarge



Speeday Motors Logo
X
DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll

Details

Reviews

Q & A

What's in the Box

This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

  • Constructed from pulverized lava rock - titanium-like strength and toughness
  • Reduces underhood temps resulting in cooler air intake for improved performance 
  • Able to handle 25% more heat than conventional wrap
  • Capable of handling more heat than any other wrap found in the market today
  • It’s pliable - no need to wet the wrap when wrapping tubing
  • Will not shrink
  • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
  • Very cool carbon fiber look

Works best on Stainless Steel headers.

Instruction Sheet (PDF)

Frequently Asked Questions (PDF)

You may also be interested in:

Thermo Tec 12001 Hi-Heat Header Wrap Coating, Black
                        

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids.

The coating also works excellent as a paint directy on metal surfaces.                 

CANNOT BE SHIPPED BY AIR!

Thermo Tec 13101 Snap Strap
                        

Snap strap stainless steel tie wraps. Enough to install wrap on two headers.  V-8 kit contains eight 9" straps and four 18" straps.

Thermo Tec 11001 Header Wrap, 1 Inch x 50 Ft, White Color
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings
Thermo Tec 11021 Header Wrap, 1 Inch x 50 Ft, Black Color
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Installation Instructions (PDF)

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings

 

DEi 010126 Titanium Exhaust Wrap, 1 Inch x 50 Ft Roll
                        

This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

  • Constructed from pulverized lava rock - titanium-like strength and toughness
  • Reduces underhood temps resulting in cooler air intake for improved performance 
  • Able to handle 25% more heat than conventional wrap
  • Capable of handling more heat than any other wrap found in the market today
  • It’s pliable - no need to wet the wrap when wrapping tubing
  • Will not shrink
  • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
  • Very cool carbon fiber look

Works best on Stainless Steel headers.

Instruction Sheet (PDF)

Frequently Asked Questions (PDF)

DEi 010128 Titanium Exhaust Wrap, 1 Inch x 15 Ft Roll
                        

This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

Works best on Stainless Steel headers.

  • Constructed from pulverized lava rock - titanium-like strength and toughness
  • Reduces underhood temps resulting in cooler air intake for improved performance 
  • Able to handle 25% more heat than conventional wrap
  • Capable of handling more heat than any other wrap found in the market today
  • It’s pliable - no need to wet the wrap when wrapping tubing
  • Will not shrink
  • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
  • Very cool carbon fiber look

Instruction Sheet (PDF)

Frequently Asked Questions (PDF)

DEi 010129 Titanium Exhaust Wrap, 2 Inch x 15 Ft Roll
                        

This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

Works best on Stainless Steel headers.

  • Constructed from pulverized lava rock - titanium-like strength and toughness
  • Reduces underhood temps resulting in cooler air intake for improved performance 
  • Able to handle 25% more heat than conventional wrap
  • Capable of handling more heat than any other wrap found in the market today
  • It’s pliable - no need to wet the wrap when wrapping tubing
  • Will not shrink
  • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
  • Very cool carbon fiber look

Instruction Sheet (PDF)

Frequently Asked Questions (PDF)

DEi 010201 8 Inch Stainless Steel Locking Ties, 8 Pack
                        

These locking ties are designed to secure DEi's exhaust wrap but the uses are endless. Made of high grade stainless steel they will withstand temperatures in excess of 2500 degrees and have a tensile strength over 100 lbs. These locking ties will provide a finished look to any job quickly and easily. 

DEi 010202 14 Inch Stainless Steel Locking Ties, 4 Pack
                        

These locking ties are designed to secure DEi's exhaust wrap but the uses are endless. Made of high grade stainless steel they will withstand temperatures in excess of 2500 degrees and have a tensile strength over 100 lbs. These locking ties will provide a finished look to any job quickly and easily. 

Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, White Color
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Heatshield Armor Exhaust Wrap, 1/4 Inch Thick, 12 x 60 Inch Sheet
                        Stop heat at its source with Heatshield Armor exhaust wrap. It has an aluminum shell and inner ceramic liner that allows it to withstand continuous 1800 degree Farenheit temperatures. Best of all, it's flexible, easy to cut and simple to install using six 14" long stainless steel ties to wrap it around your pipes. Each kit contains a 1' x 5' section of material.
                    
Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Titanium Color
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

DEi 010450 Titanium Exhaust Pipe Heat Shield, 6 Inch x 1 Ft.
                        With the strategic placement of DEI’s Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance.  Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed.
  • Capable of handling high temperature exposure up to 1350° F
  • Protects heat sensitive components, hoses, lines and electrical wiring
  • Easy to install with unique rivet-based pipe standoff brackets and pipe clamps
  • Reduces heat from entering vehicle when placed on exhaust pipes
  • Simple to re-position
  • 6" Wide x 1' Long
DEi 010451 Titanium Exhaust Pipe Heat Shield, 6 Inch x 2 Ft.
                        With the strategic placement of DEI’s Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance.  Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed.
  • Capable of handling high temperature exposure up to 1350° F
  • Protects heat sensitive components, hoses, lines and electrical wiring
  • Easy to install with unique rivet-based pipe standoff brackets and pipe clamps
  • Reduces heat from entering vehicle when placed on exhaust pipes
  • Simple to re-position
  • 6" Wide x 2' Long
DEi 010452 Titanium Exhaust Pipe Heat Shield, 6 Inch x 3 Ft.
                        With the strategic placement of DEI’s Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance.  Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed.
  • Capable of handling high temperature exposure up to 1350° F
  • Protects heat sensitive components, hoses, lines and electrical wiring
  • Easy to install with unique rivet-based pipe standoff brackets and pipe clamps
  • Reduces heat from entering vehicle when placed on exhaust pipes
  • Simple to re-position
  • 6" Wide x 3' Long