Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Curtis-Style Radius Rods, 36 Inch, Plain Steel

SAME DAY SHIPPING! Most orders ship within 24 hours.

Free Shipping Free Shipping
Specs
Material Type:
Steel
Sold in Quantity:
Each
Finish:
Painted
Thread Pitch:
.625
Thread Pitch (2):
.69
Garage Sale:
No
Overall Length:
36.00
Curtis-Style Radius Rods, 36 Inch, Plain Steel
Curtis-Style Radius Rods, 36 Inch, Plain Steel
Curtis-Style Radius Rods, 36 Inch, Plain Steel

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Speedway Curtis-style radius rods have a classic shape that's more distinctive than most hairpin-style designs. At 36" in length, these are ideal for non-fendered street rods. The axle ends are tapped 5/8" NF RH threads, while the chassis ends have female 11/16" RH threads to accept Ford tie rod ends for the perfect nostalgic touch.

NOT for use with rear suspension.

Customer Reviews

Rated 5 out of 5 by 3 reviewers.
RATING BREAKDOWN
3 reviews
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

PVM
Verified Purchaser
Dallas Texas

Great

August 11, 2015
Very heavy weight and the finish was outstanding
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

mph32
Verified Purchaser
Madison, NY 13402, USA

radius rods fit and wiorked fine

October 21, 2014
radius rods needed the threads chased to clean out what looked like a dark brown sealer of gasket glue. once that was done everything fit and worked great.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

OldCarScott
Tracy CA

Cost effective and attractive!

September 26, 2013
I used these on my 1931 Ford Coupe hot rod and they worked out great! Been driving for over six years now with no issues or complaints. An attractive and cost effective alternative to split wishbones!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Front Hairpin Radius Rods, 27 Inch, Plain Steel
(Part #91635023)
                        

These front radius rods are ideal for smaller or full-fendered cars. Rugged, 7/8" O.D. steel tubing is threaded 5/8"-18 NF right hand at each end.

Designed to be used with batwings or axle brackets with a 5" center to center bolt hole spacing on front tube or I-beam axles only. Not to be used for rear suspensions. Before installing the heim joints or clevis ends, the actual measurement will be center to center 4-1/2". The angle of the tube will increase the measurement to 5" after installing the end hardware.

Curtis-Style Radius Rods, 36 Inch, Chrome Steel
(Part #91645115)
                        

Speedway Curtis-style radius rods have a classic shape that's more distinctive than most hairpin-style designs. At 36" in length, these are ideal for non-fendered street rods. The axle ends are tapped 5/8" NF RH threads, while the chassis ends have female 11/16" RH threads to accept Ford tie rod ends for the perfect nostalgic touch.

NOT for use with rear suspension.

Curtis-Style Radius Rods, 36 Inch, Unpolished Stainless Steel
(Part #91645116)
                        

Speedway Curtis-style radius rods have a classic shape that's more distinctive than most hairpin-style designs. At 36" in length, these are ideal for non-fendered street rods. The axle ends are tapped 5/8" NF RH threads, while the chassis ends have female 11/16" RH threads to accept Ford tie rod ends for the perfect nostalgic touch.

NOT for use with rear suspension.

Curtis-Style Radius Rods, 36 Inch, Polished Stainless Steel
(Part #91645117)
                        

Speedway Curtis-style radius rods have a classic shape that's more distinctive than most hairpin-style designs. At 36" in length, these are ideal for non-fendered street rods. The axle ends are tapped 5/8" NF RH threads, while the chassis ends have female 11/16" RH threads to accept Ford tie rod ends for the perfect nostalgic touch.

NOT for use with rear suspension.

Outer Tie Rod End, 11/16-18 RH
(Part #91002909)
                        Replace those sloppy worn out tie rods with our new replacements. Original equipment on 1948-1964 Ford half-ton pickups, but these tie rod ends can be used for multiple applications other than Ford trucks. Not for use with flat steering arms. Use only with Ford type steering arms with a tapered hole. Not normally used with Chevy spindles.
                    
Standard Steel RH Heim Joint Rod Ends, 11/16-18 Shank, 5/8 Hole
(Part #1750128)
                        Every once in a while someone wants to use a rod end in place of a 11/16" tie rod. We listened to the requests and built them with 11/16"-18 RH or LH thread and accept a 5/8" thru-bolt.  Center of hole to end of threads 2-5/8"  thead length is 1-1/2".
                    
Standard Clevis, 5/8 Inch RH, 3/8 Inch Slot, Plain
(Part #91002006)
                        

A beautiful clevis ideal for your Hot Rods' suspension!

5/8" RH Thread, 3/8" Slot, 3/8" Hole, Plain