Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Currie 9+-98126 9 Inch Ford Cut-To-Fit 31 Spline Axle, 26 Inch

Price:$199.99
26" Long Axle
Price:
$199.99
EA
In Stock
Item #:
91045120
Currie 9+-98126 9 Inch Ford Cut-To-Fit 31 Spline Axle, 26 Inch
Click image to enlarge Click image to enlarge
  • Currie 9+-98126 9 Inch Ford Cut-To-Fit 31 Spline Axle, 26 Inch
  • Currie 9+-98126 9 Inch Ford Cut-To-Fit 31 Spline Axle, 26 Inch
No video at this time.
 

These axles have 4" of spline which will allow you to cut a maximum of 3" of the spline off to obtain the correct length. This is perfect for small shops and will allow you to build your own custom width rear end easily. Axle length is measured from the flange to the end of the splines.

  • Drilled for both 5 on 4-1/2" and 5 on 4-3/4" wheel bolt patterns
  • Includes both 7/16"-20 and 1/2"-20 wheel studs
  • Compatible with "Big Ford - New Style" housing and brakes with 2-1/2" offset
  • Includes a set-20 bearing and retainer you will have to press on
  • Axles sold each, not as a pair
  • 91045120
    Knurl Length
    0.350"
    Knurl Diameter
    0.612"
    Stud Length
    2.170"
    Spline Count
    31
    Spline Length
    4.000"
    Spline OD
    1.330"
    Finish
    Natural
    Sold in Quantity
    Each
    Notes
    Includes press in wheel studs (five 7/16" and five 1/2").
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • 9 Inch Ford Rear End Overhaul Kit
    9 Inch Ford Rear End Overhaul Kit
    (3 Ratings)
    Price: $87.99
    More Info
    9 Inch Ford Rear End Overhaul Kit
    x 
    							                        
    
                                                        This 9" Ford overhaul kit includes: pinion pilot, pinion shaft, pinion nut, pinion seal, gasket, shims, crush collar, sealant, gear marking grease, brush and Loctite. Ring gear bolts not included. 
    NOTE: All Ford 9" full spools use overhaul kit 9190950-31, even if they are a 28-spline spool. The 9190950-31 contains the large I.D. standard O.D. carrier bearings and pinion bearings needed for use with our full spools.
      If you are using the H.D. nodular iron center section which uses the large diameter carrier bearings, order kit 9190950-31s, which also includes the large pinion bearings for use with the Daytona pinion support.
    9" Ford Carrier Bearing Chart (GIF)  - Double check your bearing p/n.
  • Currie 9+-98129 9 Inch Ford Cut-To-Fit 31 Spline Axle, 29 Inch
    Currie 9+-98129 9 Inch Ford Cut-To-Fit 31 Spline Axle, 29 Inch
    Price: $199.99
    More Info
    Currie 9+-98129 9 Inch Ford Cut-To-Fit 31 Spline Axle, 29 Inch
    x 
    							                        
    
                                                        
    These Currie axles have 4" of spline which will allow you to cut a maximum of 3" of the spline off to obtain the correct length. This is perfect for small shops and will allow you to build your own custom width rear end easily. Axle length is measured from the flange to the end of the splines.
    • 9 Inch Ford
    • 31 Spline
    • 29 Inch Long
    • Drilled for both 5 on 4-1/2" and 5 on 4-3/4" wheel bolt patterns
    • Includes both 7/16"-20 and 1/2"-20 wheel studs
    • Compatible with "Big Ford - New Style" housing and brakes with 2-1/2" offset
    • Includes a set-20 bearing and retainer you will have to press on
    • Axle length is from the flange to the end of the splines 
    • Axles sold each, not as a pair
    How to Measure Your Housing Tech Tip (Link)
  • Currie 9+-98132 9 Inch Ford Cut-To-Fit 31 Spline Axle, 32 Inch Long
    Currie 9+-98132 9 Inch Ford Cut-To-Fit 31 Spline Axle, 32 Inch Long
    Price: $199.99
    More Info
    Currie 9+-98132 9 Inch Ford Cut-To-Fit 31 Spline Axle, 32 Inch Long
    x 
    							                        
    
                                                        
    These axles have 4" of spline which will allow you to cut a maximum of 3" of the spline off to obtain the correct length. This is perfect for small shops and will allow you to build your own custom width rear end easily. Axle length is measured from the flange to the end of the splines.
    • Drilled for both 5 on 4-1/2" and 5 on 4-3/4" wheel bolt patterns
    • Includes both 7/16"-20 and 1/2"-20 wheel studs
    • Compatible with "Big Ford - New Style" housing and brakes with 2-1/2" offset
    • 4" of spline which allows you to cut a maximum of 3" of the spline off to obtain the correct length
    • Perfect for small shops that want to build your own custom width rearend
    • Includes a set-20 bearing and retainer you will have to press on
    • Axles sold each, not as a pair
  • Currie 9+-98135 9 Inch Ford Cut-To-Fit 31 Spline Axle, 35 Inch
    Currie 9+-98135 9 Inch Ford Cut-To-Fit 31 Spline Axle, 35 Inch
    Price: $199.99
    More Info
    Currie 9+-98135 9 Inch Ford Cut-To-Fit 31 Spline Axle, 35 Inch
    x 
    							                        
    
                                                        
    These axles have 4" of spline which will allow you to cut a maximum of 3" of the spline off to obtain the correct length. This is perfect for small shops and will allow you to build your own custom width rear end easily. Axle length is measured from the flange to the end of the splines.
    • Drilled for both 5 on 4-1/2" and 5 on 4-3/4" wheel bolt patterns
    • Includes both 7/16"-20 and 1/2"-20 wheel studs
    • Compatible with "Big Ford - New Style" housing and brakes with 2-1/2" offset
    • Includes a set-20 bearing and retainer you will have to press on
    • Axles sold each, not as a pair