Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

COMP Cams 17001-16 SBC High Energy Aluminum Rocker Arms-1.5:1-3/8 Stud

Free Shipping Free Shipping
COMP Cams 17001-16 SBC High Energy Aluminum Rocker Arms-1.5:1-3/8 Stud

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

High Energy Die Cast Aluminum Roller Rocker Arms for small block Chevy V8 265-400 applications are perfect for street and moderate race use.

  • Larger-than-stock aluminum body for superior strength with light overall weight
  • Needle bearing fulcrum and roller tip
  • Designed to be stiffer and more durable
  • Specially engineered fulcrum and roller tip create less friction than sliding factory models
  • Lowers oil temperatures, thus improving both response and horsepower
  • Snap rings lock the trunion and bearings in place

Note: Poly locks are not included, they are sold separately!

Customer Reviews

This product has no reviews.

Product Q&A

4 questions : 5 answers

2 answers

Do these rocker need valve guides on 327 202 heads?

Hunt2020
Bixby, OK, USA
September 19, 2013

Do these rocker need valve guides on 327 202 heads?

Answers

September 27, 2013
jefflock
I think you are confusing valve guides which are required on all heads and push rod guide plates.
September 20, 2013
Jason
The Comp cams high energy rockers are not self aligning and work best with guide plates or heads with the pushrod guide holes.
1 answers

Will these clear 1.55 valve springs?

February 13, 2012

Will these clear 1.55 valve springs?

Answers

February 14, 2012
Jason
These will clear 1.55" springs if using stock length valves. If using longer valves you will need to check as this changes the geometry
1 answers

Will these work with stock push rods or will I need special length pieces?

Tbucket owner
Northeastern Minnesota
July 12, 2015

Will these work with stock push rods or will I need special length pieces?

Answers

July 13, 2015
Zach
Expert
These use stock length pushrods, unless the engine has somethign else that dictates it uses a different length pushrod.
1 answers

Will these work with stock push rods or will I need special length pieces?

Tbucket owner
Northeastern Minnesota
July 12, 2015

Will these work with stock push rods or will I need special length pieces?

Answers

July 15, 2015
Eric
Expert
We suggest checking pushrod length for your particular application with a pushrod checker such as 28799721.
Page 1 of 1

You may also be interested in:

Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 3/8 Stud
(Part #57533501)
                        

BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. Includes polylocks.

  • Designed to meet the demands of most high-lift roller camshaft profiles
  • Specially machined to accommodate larger valve springs and retainers
  • SAE-52100 Full complement precision needle and cage roller bearings
  • Anodized for a superior finish and to reduce operating temperatures
  • CNC machined pushrod cups and heat-treated Cr40 roller tips
  • Internal oiling system for long lasting performance
  • H.D. polylocks included

Item Details

S/B Chevy - 1.5 Ratio - 3/8" Stud
COMP Cams 17002-16 SBC High Energy Aluminum Rocker Arms-1.6:1-3/8 Stud
(Part #28217002)
                        

High Energy Die Cast Aluminum Roller Rocker Arms for small block Chevy V8 265-400 applications are perfect for street and moderate race use.

  • Larger-than-stock aluminum body for superior strength with light overall weight
  • Needle bearing fulcrum and roller tip
  • Designed to be stiffer and more durable
  • Specially engineered fulcrum and roller tip create less friction than sliding factory models
  • Lowers oil temperatures, thus improving both response and horsepower
  • Snap rings lock the trunion and bearings in place

Note: Poly locks are not included, they are sold separately!

COMP Cams 17004-16 SBC High Energy Alum Rocker Arms, 1.5:1, 7/16 Stud
(Part #28217004)
                        

High Energy Die Cast Aluminum Roller Rocker Arms for small block Chevy V8 265-400 applications are perfect for street and moderate race use.

  • Larger-than-stock aluminum body for superior strength with light overall weight
  • Needle bearing fulcrum and roller tip
  • Designed to be stiffer and more durable
  • Specially engineered fulcrum and roller tip create less friction than sliding factory models
  • Lowers oil temperatures, thus improving both response and horsepower
  • Snap rings lock the trunion and bearings in place

Note: Poly locks are not included, they are sold separately!

COMP Cams 17005-16 SBC High Energy Alum Rocker Arms, 1.6:1, 7/16 Stud
(Part #28217005)
                        

High Energy Die Cast Aluminum Roller Rocker Arms for small block Chevy V8 265-400 applications are perfect for street and moderate race use.

  • Larger-than-stock aluminum body for superior strength with light overall weight
  • Needle bearing fulcrum and roller tip
  • Designed to be stiffer and more durable
  • Specially engineered fulcrum and roller tip create less friction than sliding factory models
  • Lowers oil temperatures, thus improving both response and horsepower
  • Snap rings lock the trunion and bearings in place

Note: Poly locks are not included, they are sold separately!

Edelbrock 77770 Red Roller Rocker Arm, Small Block Chevy
(Part #32577770)
                        7129 grade aluminum. CNC machined. Micro polished. Anodized. Accommodates up to 1.65 inch diameter springs. Made in U.S.A.
  • 7129 Grade Aluminum
  • CNC Machined
  • Micro Polished
  • Anodized
  • Accommodates Up To 1.65 in. Diameter Springs
  • Made In U.S.A.

Installation Instructions (PDF)