Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

COMP Cams 862-16 Ford Pro Magnum Hydraulic Lifters

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

COMP Cams Pro Magnum Hydraulic Lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic lifter, high rpm is limited by the improper position of the internal piston as the lifter inevitably “pumps up”. This improper location results in open valves and therefore leads to lost power or sometimes even engine failure. COMP Cams Pro Magnum Hydraulic Lifters offer a distinct advantage over standard high performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used. 

COMP Cams lifters are manufactured to the highest standards and when used with their oil additive will give you the best results.

Fits 289, 302, 351W, 351C, 351M, 400M, 429, and 460 c.i. engines.

 

You may also be interested in:

Red Line 80312 Engine Assembly Lube, 4 Oz.
                        

Red Line Oil Assembly Lube is not designed to be the cheapest – it's built to be the best. It has three times greater film-strength than conventional black Molybdenum Disulfide lubricants. Provides excellent rust and corrosion protection. Stays put and supplies a high film strength for protection. Excellent for crankshaft installation. Can be used safely with all metals, including bearings. Can be used with petroleum or synthetic oils.

  • Prepares potential wear surface and prevents metal contact before adequate lubrication can be supplied
  • Will not plug filters after initial engine start-up, unlike other assembly lubes
  • Provides 3x greater film strength than conventional black Molybdenum Disulfide greases
  • Excellent rust and corrosion inhibitor, allows for long-term storage
  • For use on camshafts, lifters, pushrods, piston skirts, main and rod bearings, and bolt threads
  • Do not use on exhaust bolts or other high temperature bolts which require an anti-seize
  • Recommended and used by top camshaft and drivetrain manufacturers

Assembly Lube Product Data (PDF)

Learn why using assembly lube is so important in our tech article, Installing New Hardware.

Small Block Ford Steel Roller Tip Rockers
                        

If your class or budget does not allow aluminum or stainless roller rocker arms, check out these rockers. Made from 4340 heat treated steel and feature a longer slot to eliminate stud bind issues. Includes nuts and balls. 

Rockers accommodate a 5/16" pushrod.

COMP Cams 159-12 Engine Break-In Lube Oil Additive
                        

ZDDP-enhanced Engine Break-In Lube Oil Additive from COMP Cams provides maximum engine life while also allowing it to reach its full performance potential. It does so by improving the surface mating of valve train components (especially flat tappets), rotating assembly, rod journals, piston rings, valve guides and other vital areas of the engine. This proprietary break-in lube formula includes the optimum amount of critical additives ZDDP (Zinc & Phosphorus), Molybdenum, detergents and high grade base oil.

The multi-viscosity, mineral-based COMP Cams Engine Break-In Oil Additive is fully-formulated and requires no additives or supplements. In addition, the oil is fully compatible with gasoline, methanol and high octane racing fuels.