Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Coilover Kits, 2 Inch Body, 5 Inch Coilover Sleeve

SAME DAY SHIPPING! Order within the next 11 hours 3 minutes and receive same day shipping

Specs
Material Type:
-
Sold in Quantity:
Each
Finish:
-
Overall Diameter:
-
MFG. Part #:
-
Tube O.D.:
-
Inside Diameter:
-
Outside Diameter:
-
Tube I.D.:
-
Garage Sale:
No
Notes
This kit is for 50 series shocks. To make work with 26 and 51 series you will need snap ring PN# 213-40100.
Coilover Kits, 2 Inch Body, 5 Inch Coilover Sleeve

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These coil over kits fit bearing end shocks with no modifications necessary. Available for Pro Shocks, Carrera, Monroe, QA1 or Bilstein coil-over compatible shocks.  

Coilover kit works with 2 1/2" I.D. springs and 2" O.D. body shocks. The Carrera kit can be used on Bilstein shocks by adding a thick (.120") washer in the spring seat cup.

Note:  The Bilstein application will not include the coil-over snap ring as Bilstein shocks include a new coil-over snap ring from the factory.  If one is required, the coil-over snap ring is available as # 213-40100

910-46236 Instructions (PDF)

Customer Reviews

This product has no reviews.

Product Q&A

8 questions : 8 answers

1 answers

Shock choice Other than the snap ring is there a difference between shock choice? I'm using this in a strut cartridge application (KYB AGX 765016)

hchollis
March 19, 2015

Shock choice Other than the snap ring is there a difference between shock choice? I'm using this in a strut cartridge application (KYB AGX 765016)

Answers

March 19, 2015
EricM
The ID of the coil over sleeve is different for each brand as well as the spring seat (cone shaped piece) is designed specifically for each brand of shocks particular rod end. Sorry none of these are intended for KYB struts.
1 answers

question about monroe shock fitment I sell monroe shocks at work and have never seen one with a groove for the snap ring, how does that work on monroes?

79amx
June 08, 2014

question about monroe shock fitment I sell monroe shocks at work and have never seen one with a groove for the snap ring, how does that work on monroes?

Answers

June 09, 2014
EricM
These are only for Monroe racing shocks that have a snap ring grove.
1 answers

Does the kit include the snap ring for the Bilstein shocks? If not, what part#?

Opie
Brea, CA, USA
February 19, 2014

Does the kit include the snap ring for the Bilstein shocks? If not, what part#?

Answers

February 20, 2014
EricM
No the Bilstein kit does not come with the snap ring. The Bilstein snap ring part number is 21340100. It is not available on our website at this time but give us a call or leave us a message with that part number in the comments box when placing your order on the website.
1 answers

Are these sleeves aluminum or steel and what is the surface treatment?

February 01, 2012

Are these sleeves aluminum or steel and what is the surface treatment?

Answers

February 02, 2012
Eric
The threaded sleeve, adjuster, and spring cup are billet aluminum with hard anodized finish
1 answers

how many sleeves are in the kit

September 26, 2011

how many sleeves are in the kit

Answers

September 27, 2011
Jason
These are sold as each, 1 kit will do 1 shock. 1 sleeve per kit
1 answers

I have a 96 c4 corvette with stock bilsteen shocks which one do I need?

jay
May 15, 2015

I have a 96 c4 corvette with stock bilsteen shocks which one do I need?

Answers

May 18, 2015
Eric
Expert
Sorry these coil over kits will not fit your shocks. We do not offer the correct kit for your application.
1 answers

will this coilover kit work with the AFCO 1474 shock? those shocks have a 2" body so i was hoping it would work, if so will i use the 2 5/8" coilover spring?

shockley67
redding ca.
December 08, 2015

will this coilover kit work with the AFCO 1474 shock? those shocks have a 2" body so i was hoping it would work, if so will i use the 2 5/8" coilover spring?

Answers

December 09, 2015
Eric
Expert
No this will not fit an Afco 14 series shock. You will need coilover kit 10620125A for a 2 1/2" ID spring or 10620125A7K for a 5" OD spring.
1 answers

Hi I was wondering if these would work with monroe monro-matic plus struts?

Junior
Long Island, NY
December 15, 2015

Hi I was wondering if these would work with monroe monro-matic plus struts?

Answers

December 15, 2015
Eric
Expert
No these will not work on any Monroe shocks other than their circle track racing shocks.
Page 1 of 1

You may also be interested in:

Coilover Kits, 2 Inch Body, 7 Inch Coilover Sleeve
(Part #91046238)
                        These coil over kits fit bearing end shocks with no modifications necessary. Available for Pro Shocks, Carrera, Monroe, QA1 or Bilstein coil-over compatible shocks.  

Coilover kit works with 2 1/2" I.D. springs and 2" O.D. body shocks. The Carrera kit can be used on Bilstein shocks by adding a thick (.120") washer in the spring seat cup.

Note:  The Bilstein application will not include the coil-over snap ring as Bilstein shocks include a new coil-over snap ring from the factory. If one is required, the coil-over snap ring is available as # 213-40100

910-46238 Instructions (PDF)

IMCA Approved 5 Inch Rear Spring Coilover Kit, 5 Inch Sleeve
(Part #91045580)
                        

For 2005, IMCA allows modifieds to run 5" spring coil over kits on their steel rear shocks. We offer the complete kit with coilover kit and 5" spring plates. Choose Bilstein, Pro, QA1, Carrera or Monroe steel shocks.

Coil-Over Mounting Guide (GIF)

Item Details

Kit includes shock coil-over kit # 910-46236 and spring adapter plates # 910-45582
QA1 7888-109 Coil-Over Thrust Bearing Kit
(Part #7217888)
                        

This kit installs at the bottom of the 2-1/2" I.D. coil-over spring and allows easier adjustment of your ride height.

  • Includes two bearings and four washers
  • Kit services two coilovers
  • 2.512" I.D.
  • 3.233" O.D.
Coilover Mounting Kit, 2 Inch Body
(Part #2551971)
                        

For all Carrera coil over shocks with 2" O.D. body. Use with 2-1/2" I.D. springs.

  • Overall length of threaded sleeve is 5-1/2"
  • Length of threaded area is 4-7/8"
  • O.D. is nearly 2-5/16"
  • I.D. is nearly 2"

255-1971 Instructions (PDF)

Coil-Over Spanner Wrench
(Part #91082155)
                        

This coilover adjustment tool allows for easy adjustment of ride height on your coil-over shocks. Cut from thick plate steel, this coilover adjustment wrench is built to withstand years of use. Spanner wrench will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits, which makes it a must have if you have coil-over shocks!

  • Adjustment of ride height on your coil-over shocks
  • Will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits

Note: To make easier use of these wrenches, it is recommended that spring pressure be relieved before adjusting. We also recommend using a coil-over bearing kit between your spring and adjuster nut for much easier movement.

 

Steve Smith Autosports S298 Dirt Late Model Chassis Technology Book
(Part #91085183)
                        Takes you through design, construction, suspension, set-up, theory and all other aspects of late model racing. 104 pages. 
                    
Howe Racing Enterprises 30205 IMCA Light 5 Inch Spring Adapter Plate
(Part #91045583)
                        Spring adaptor plates to adapt your 2-1/2" coil-over kit to the IMCA approved 5" spring.