Get your questions answered by the community. Ask or answer questions below.
5
Questions
|
5
Answers
Displaying Questions
1-5 of 5
Q:
will this fit a 1983 olds cutlass v-8
Answers (1)
Know the answer?
Answer this question
A:
These flywheel dust covers fit the majority of the 3 speed GM Turbo 350 and 400 transmissions.
It will NOT fit 200 or 300 series or the later 700R or 4L60 series transmissions which were 4 speed or overdrive transmissions
Q:
Will this cover fit on a 1971 impala 350 custom coupe?
Answers (1)
Know the answer?
Answer this question
A:
This chrome dust cover is the most common for the 350 turbo transmissions. Some 350 applications require the larger starter slot number 7209588 and for a guaranteed fit would be the logical choice. The other option would be to get the 7209340 and if need be trim to the necessary size with a quality tin snip.
Q:
I have a hitachi mini starter on 350 Chevy SB and want to know if this dust cover will work?
Answers (1)
Know the answer?
Answer this question
A:
Half circle cut out in front of this cover is 2 3/8" tall
and 5 3/4" wide.
Front height is 6 7/16"
Maximum front opening width is 16 7/8"
Front to rear depth of cover is 6 7/16"
Bolt holes are slotted with dimension variables as follows:
Front bolt slots variable from 18" to 19"
Rear bolt slots variable from 9 1/2 to 10 3/4"
Starter cutout is approximately 3 3/4" wide
with lower outer corner tapering inward to match curvature of cover.
Starter cutout is 4" in height
This cover may require alteration in area of half circle cutout
to match up to your transmission.
Q:
will this dust cover fit a 700R4 transmission
Answers (1)
Know the answer?
Answer this question
A:
Sorry, this will not fit 700R4. We do offer part #9109587 for 700R4
Q:
Will this fit a 1998 K1500 5.7 4wd?
Answers (1)
Know the answer?
Answer this question
A:
Part #7209340 will fit most turbo 350's and part #7209588 will fit some turbo 350's and all turbo 400 transmission's.
7209340- is 20" long, 8" wide and 6-1/2" tall
Half circle cut into the front is 5.75" x 2.375". Max
front opening width is 16.875. Mounting holes are slotted
front will mount 18"-19" and read from 9.5"-10.75".
Starter cutout is 3.75" x 4". Cover may require
alteration in half circle area to match transmission.
Displaying Questions
1-5 of 5
Do you have a question about this product?