Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Chrome Side Exhaust Pipes w/ Mufflers, 60 Inch

Free Shipping Free Shipping
Specs
Material Type:
Steel
Sold in Quantity:
Pair
Finish:
Chrome
Garage Sale:
No
Overall Length:
60.00
Inlet Size:
2.25
Tube O.D.:
3.00
Notes
Heat shields are 46.00" long. Kickout and inlet are adjustable for the angle.
Chrome Side Exhaust Pipes w/ Mufflers, 60 Inch
Chrome Side Exhaust Pipes w/ Mufflers, 60 Inch
Chrome Side Exhaust Pipes w/ Mufflers, 60 Inch

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Give your vehicle that custom look with a classic chrome shielded side exhaust system. Large chrome 2-1/4" I.D. inlet, 3" O.D. chrome outlet pipes and low back pressure six-sided louvered core painted black mufflers guarantee performance and produce a distinctive power tone. Complete installation flexibility is built in with the full 360° rotation feature on both inlet and outlet pipes. Includes mounting hardware.

Not legal for sale or use in California on pollution controlled motor vehicles.

Notes

These side exhausts come unassembled. The front portion with the 90 degree bend is chrome along with the rear turn out section. The center section is satin black finish and is expanded at one end and swedged at the other for assembly. The chrome plated heat shield clamps onto the center section which also houses the non-removable muffler/baffle assembly.

NOTE: Each measurement is taken from tip of elbow to exhaust tip. 

Customer Reviews

Rated 5 out of 5 by 3 reviewers.
RATING BREAKDOWN
3 reviews
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

YEAGER
Verified Purchaser
Buffalo, NY, USA

WOW FACTOR

February 14, 2015
ADDS A LOT OF CHARACTER TO MY TRUCK. IT DID GIVE IT THE WOW FACTOR
Cons:
  • ordered a t bucket catalog it was not sent
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

schmidty
amsterdam ny

nice crome

September 29, 2013
not a bad price if you get free shipping speedway back there product 100 % whick you cant beat that
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

59Scott
Northborough, MA, USA

Side pipes well made, look and sound gre

October 25, 2012
The side pipes arrived quickly in good condition. Everything was good quality material, and included in the box. The chrome plating looks great. Installation was as good as could be expected on my custom application.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

13 questions : 13 answers

1 answers

can i get just one side?

bryangeyer
Virginia, USA
February 22, 2015

can i get just one side?

Answers

February 23, 2015
EricM
Sorry these are only sold as pairs.
1 answers

What is the OD of the heat shield

Pat65
October 21, 2014

What is the OD of the heat shield

Answers

October 22, 2014
EricM
The heat shields are 4 1/2" OD.
1 answers

these side pipes fix to pro mod corvettet 1967 LS3 engine?

rafy
Puerto Rico
May 29, 2014

these side pipes fix to pro mod corvettet 1967 LS3 engine?

Answers

May 30, 2014
EricM
These pipes are universal in nature and can be used on nearly any vehicle that the 60" length works out well for.
1 answers

I have a 1989 Firebird with a 305, stock headers. Other than length preference, is this kit considered reasonably universal?

Birdman
April 17, 2014

I have a 1989 Firebird with a 305, stock headers. Other than length preference, is this kit considered reasonably universal?

Answers

April 17, 2014
EricM
Yes these are universal kits and can be fitted to nearly any car that the 60" length will work on.
1 answers

how do you hang these pipes on your car,,what type of hangers are needed

73novaman
Ontario, Canada
April 05, 2014

how do you hang these pipes on your car,,what type of hangers are needed

Answers

April 07, 2014
EricM
The mounting hardware including hangers are included. The hangers are a strap that bolts onto one side of the U bolt and then fasten the top of the strap to your vehicle.
1 answers

Most header pipes have some sort of flange on the end of them, do you have an adapter for the side pipes to attach them to the headers?

cornman
NE
February 26, 2014

Most header pipes have some sort of flange on the end of them, do you have an adapter for the side pipes to attach them to the headers?

Answers

February 27, 2014
EricM
These side pipes are made so that they will slip right over a 2 1/4" exhaust pipe so that you can clamp or weld them to it.
1 answers

Do these sidepipes fit on the existing exhaust pipes or are they attached to the flange of the header pipe? I have a 1951 Willys panel delivery truck with a 350 chevy with close fitting headers and dual exhaust. thought it would look nice with side pipes on it and was wondering exactly what the sidepipes attach to.Since I see no type of flange offered, I am guessing that they must be attached to the exhaust pipe itself. Any info and advise will be appreciated.

cornman
NE
February 24, 2014

Do these sidepipes fit on the existing exhaust pipes or are they attached to the flange of the header pipe? I have a 1951 Willys panel delivery truck with a 350 chevy with close fitting headers and dual exhaust. thought it would look nice with side pipes on it and was wondering exactly what the sidepipes attach to.Since I see no type of flange offered, I am guessing that they must be attached to the exhaust pipe itself. Any info and advise will be appreciated.

Answers

February 25, 2014
EricM
These will need to be mounted along the bottom edge of the body of the vehicle then you will need to route an exhaust pipe from your header to the inlet of these side pipes.
1 answers

I was wondering if these could be used as stacks for a pick up

January 13, 2012

I was wondering if these could be used as stacks for a pick up

Answers

January 16, 2012
John
Part # 91013460 and longer. These side exhaust have been used on many applications including stacks on trucks. Mounting is up to the customer for fabrication as needed.
1 answers

Feeling rather stupid here.. if i order a quantity of 1 will i get both of the exhausts in the picture? or do i have to put quantity at 2? thanks

St. Cloud, MN
September 01, 2011

Feeling rather stupid here.. if i order a quantity of 1 will i get both of the exhausts in the picture? or do i have to put quantity at 2? thanks

Answers

September 02, 2011
Jason
These are sold as a pair. Order 1 will get you left and right pipe
1 answers

i have a 31 ford coupe with inside frame hugger headers , not sure what other hardware i would need to connect the chrome 60" sidepipe exhaust.

jim,ohio
stow,ohio
July 04, 2011

i have a 31 ford coupe with inside frame hugger headers , not sure what other hardware i would need to connect the chrome 60" sidepipe exhaust.

Answers

July 06, 2011
John
To complete the installation to a set of block hugger headers you may want to consider part number 9307402 side pipe kit and part number 91013385 for the block hugger extension kit. You may also need a pair of reducers from the side pipe kit to the side pipes.
Page 1 of 2

You may also be interested in:

Chrome Side Exhaust Pipes w/ Mufflers, 70 Inch
(Part #91013470)
                        

Give your vehicle that custom look with a classic chrome shielded side exhaust system. Large 2-1/4" I.D. chrome inlet, 3" O.D. chrome outlet pipes and low back pressure six-sided louvered core painted black mufflers guarantee performance and produce a distinctive power tone. Complete installation flexibility is built in with the full 360° rotation feature on both inlet and outlet pipes. Includes mounting hardware.

Not legal for sale or use in California on pollution controlled motor vehicles.

Chrome Side Exhaust Pipes w/ Mufflers, 80 Inch
(Part #91013480)
                        

Give your vehicle that custom look with a classic chrome shielded side exhaust system. Large 2-1/4" I.D. chrome inlet, 3" O.D. chrome outlet pipes and low back pressure six-sided louvered core painted black mufflers guarantee performance and produce a distinctive power tone. Complete installation flexibility is built in with the full 360° rotation feature on both inlet and outlet pipes. Includes mounting hardware.

Not legal for sale or use in California on pollution controlled motor vehicles.

Side Pipe Exhaust Hook-Up Kit
(Part #9307402)
                        We all know what a pain it can be to hook up a set of side pipes or find tight bends for a one-off project. May require fabrication to fit your application. 
  • Two 2-1/2" 180° u-bends
  • Two 2-1/2" 90° bends
  • Four steel tube clamps

930-7402 Instructions (PDF)

Item Details

(2) 2-1/2" 180-¦ u-bends
(2) 2-1/2" 90-¦ bends
(4) steel clamps