Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Chrome Model A Tail Light Bracket, Right

Price:
$12.99
EA
In Stock
Item #:
91127007
Chrome Model A Tail Light Bracket, Right
Click image to enlarge Click image to enlarge
No video at this time.
 

Chrome plated stamped steel Model A tail light bracket only (taillight is not included). Left side bracket will mount license plate bracket.

  • 91127007
    Overall Length
    5.380"
    Overall Height
    2.830"
    Diameter
    0.250" (1/4")
    Center to Center
    1.790"
    Bezel Finish
    Chrome
    Material Type
    Steel
    Gasket(s) Included
    No
    Hardware Included
    No
    Sold in Quantity
    Each
    Notes
    Right-hand bracket
  • Mount point to mount point is 5-3/8"
  • The flange to which the taillight attaches is 2.375" round, with the taillight bolt holes (2 of them, ¼" diameter), horizontal, 1.75" apart
  • The flanges for the taillight and the fender are not parallel, but are the closest at 4.5"
  • The fender flange is triangle-shaped, 3.625" wide by 2.75" tall
  • The 3-bolt pattern of the fender flange is 2.25" by 2.25" by 2.875" (1/4" square holes)
  • Three holes are drilled to mount this bracket to your Model A fender:
    • The bottom two holes are 3-7/8" center to center
    • The top hole is 3-3/8" center to center with each bottom hole
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
1928-1931 Ford Model A Stainless Tail Lights
Item #:
91127001
Chrome Model A Tail Light Bracket, Left
Price:
$12.99
EA
In Stock
Item #:
91127008
You May Also Be Interested In...
  • Black Model A Tail Light Bracket, Right
    Black Model A Tail Light Bracket, Right
    Price: $9.99
    More Info
    Black Model A Tail Light Bracket, Right
    x 
    							                        
    
                                                        
    Stamped steel Model A tail light bracket (tail light is not included). Black powder coat finish. Left side bracket will mount license plate bracket.
    Three holes are drilled to mount this bracket to your Model A fender:
    • The bottom two holes are 3-7/8" center to center
    • The top hole is 3-3/8" center to center with each bottom hole