Chrome License Plate Frames
Click image to enlarge
Q & A
What's in the Box
It's really hard to find a good quality chrome license plate frame. These are among the best available. Measures 12-9/16" x 6-3/8".
- The back of this frame has 1/8" stand off bushings around the bolt holes because the old style stamped steel license plates have a raised bead around their perimeter. The flat ears on the frame can get bent and broken when tightened on an uneven surface.
- These frames will work well on flat license plates that have the large bolt holes. License plates that have small holes (5/16”) can be drilled to 7/16” so that the stand off bushings pass through the holes. You could also file down the stand off bushings to fit your application.
You may also be interested in:
Bullet Shape License Plate FastenersMore Info
Chrome Dice License Plate FastenersMore Info
Stainless Steel Lighted License Plate BoltsMore Info
LED License Plate Bolt LightMore Info
Louvered Stainless License Plate BackMore Info
Smooth Stainless License Plate BackMore Info
Lighted Chrome License Plate FrameMore Info
Chrome Skull License Plate BoltsMore Info
EMPI 9457 Chrome License Plate Light w/Bracket AssemblyMore Info
Black Electric Hidden License Plate Kit, Ignition OperatedMore Info
These bullet-shaped fasteners are chrome plated brass; over 1" long and 3/8" diameter at base. Washers, nut and 1 /4 " stud are bright plated to resist corrosion.
ABS dice are a great way to attach your license plate. 5/8" square head, 1/4" x 3/4" stud. Includes flatwashers and nuts.
These lighted stainless steel bolts were designed to be used with license plates but with a little imagination, the options are endless. Fully-sealed waterproof design is also shock and vibration-proof.
- Map light
- Dash light
- Courtesy lamp
Sold by the pair. White color bulb only.
These LED bolts can be used to add some style to your license plate frame, or anywhere else on your car for that matter. The possibilities are endless. Features a chrome metal housing which is 1.24" in overall length with a threaded stud and nut for mounting. 12V or 6V operation, but they are much brighter with 12V.
- LED lighted bolts
- Chrome metal housing
- 1.24" in overall length
- 36" wire length
- Threaded stud and nut for mounting
- 12V or 6V operation but much brighter with 12V
- Available in a selection of colors.
- These lights are sold as a pair.
- Choose from colors: blue, green, red, purple, yellow, white, or amber
This louvered stainless license plate back adds detail and strength.
This smooth stainless license plate back adds detail and strength.
- O.D. = 12" X 6"
- Mounting Holes = 7" X 4-3/4"
- Thickness = .047"
It's really hard to find good quality license plate frames. This lighted license plate frame is chrome plated. Uses a standard 12 volt, 3 watt replaceable dome light bulb.
Are you looking for a way to top off those fresh new plates? If so, then these chrome skull license plate bolts are right up your alley. They include steel washers, nuts, and bolts to keep your plates securely in place.
- Steel washers, nuts, and bolts
- Sold as a pair of two(2)
- Chrome finish
These chrome plated license plate frames feature heavy gauge steel with a built-in license light. They are great for Baja Bugs and Buggies or other off road use.
- Heavy gauge steel for off-road use
- Chrome plated
- Comes with 12-Volt bulb for built-in light
Note: When installed on Fiberglass be sure to ground to chassis.
These electric hide-away license plate kits are designed to operate off of your ignition switch – up when showing/down when driving. They feature all electrical components with a steel cased motor and steel gears. A slip clutch is incorporated on the drive shaft of the motor. These kits are an easy install with two wires to the front of vehicle and they are protected for safety by two 10 amp fuses – one in each main wire.
- Flip the license plate down when you turn the key on
- Flips back up when turned off
- Includes wire, connectors and hardware
- Available in stainless steel or black finish