ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Carrera 2254D Street Rod Rear Coil Over Shock Kit, 200 lbs. Rate

SAME DAY SHIPPING! Order within the next 3 hours 28 minutes and receive same day shipping

Free Shipping Free Shipping
Specs
Material Type:
Steel
Sold in Quantity:
Kit
Finish:
Chrome
Inside Diameter:
2.625
Extended Length:
14.625
Compressed Length:
9.75
Thread Length:
3.4185
Mounted Length:
12.375
Spring Rate:
200
Upper Shock Mount:
5/8 Inch Eyelet
Lower Shock Mount:
5/8 Inch Eyelet
Shock Body Material:
Steel
Garage Sale:
No
Carrera 2254D Street Rod Rear Coil Over Shock Kit, 200 lbs. Rate

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

Each kit includes:

  • (1) Chrome 1.63" steel body shock
  • (1) Chrome 10" spring
  • (1) Polished aluminum spring mounting kit
  • Mounted Length:  12-3/8"
  • Compressed Length:  9-3/4"
  • Extended Length:  14-5/8" 
  • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

Coil-Over Mounting Guide (GIF)

Carrera Spring Rate Chart (GIF)

Coil-Over Illustration (Link)

Item Details

10" tall, 200 lb. spring

Customer Reviews

Rated 5 out of 5 by 5 reviewers.
RATING BREAKDOWN
5 reviews
5 Stars
5
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

GTV6
Verified Purchaser
Camarillo, CA, USA

Coil over kit

October 11, 2014
Great value, great quality. We used this kit on our rear suspension kits.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

GTV6
Verified Purchaser
Camarillo, CA, USA

Coil over kit

October 11, 2014
Great value, great quality. We used this kit on our rear suspension kits.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

dan
Verified Purchaser
arcata ca.

i would buy this product again

May 27, 2011
nice shock.good looking crome
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Thegrappler
Verified Purchaser
MPLS, MN

Very nice quality and good value

December 14, 2010
Bought these for my 31 Model A ,being on a budget was going to use some other brand that wasn't even a real coil-over and had painted shocks and springs untill I found these although not in description they are Carrara QA1 shocks and springs, Very nice chrome and quality[...]
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

reddhott2
sinking spring

coilover shocks

March 29, 2010
nice product
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

3 questions : 3 answers

1 answers

mounting bushing width ? will these fit into a standard 1 1/4" i.d. shock mount ?

Busey
Michigan, USA
December 05, 2012

mounting bushing width ? will these fit into a standard 1 1/4" i.d. shock mount ?

Answers

December 05, 2012
Jason
The shock eyelet width is 1.29" and is for a 5/8" diameter bolt. The top mount will also accept 7/16" diameter bolt
1 answers

I'm running a 67 camaro. How do you determine the spring lbs. I don't want to get them to heavy and drive like a tank, but yet don't want it to loose. I'm looking at the 200lbs set????? thanks gordon

flash
Killeen, Tx
September 27, 2011

I'm running a 67 camaro. How do you determine the spring lbs. I don't want to get them to heavy and drive like a tank, but yet don't want it to loose. I'm looking at the 200lbs set????? thanks gordon

Answers

September 29, 2011
Zach
Speedway part number 2552254D. To come up with a ballpark spring rate, we would take the weight of the rear of the car, length of spring and the angle it's mounted at. A 67 Camaro should weigh about 3200 lbs, so about 1600 give or take in the rear. A Carrera 10" spring rate for a car that weighs about 1650 lbs is 275 lbs/in. If the coil over is mounted at an angle, the rate will need to be adjusted accordingly. We have a chart here on out website that explains this http://static.speedwaymotors.com/images/charts/how-coilovermount.gif . I think you could start with a 250 or a 275 rate, depending on what your car weighs and the angle the coil over will be mounted at.
1 answers

what is the ride height for this coilover

wayne
austin tx
April 02, 2012

what is the ride height for this coilover

Answers

April 03, 2012
John
This coil over carries a manufacturers suggested mount length of 12 3/8” at ride height with the weight on the vehicle.
Page 1 of 1

You may also be interested in:

Carrera 2254A Street Rod Rear Coil Over Shock Kit, 115 lbs. Rate
(Part #2552254A)
                        

Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

Each kit includes:

  • (1) Chrome 1.63" steel body shock
  • (1) Chrome 10" spring
  • (1) Polished aluminum spring mounting kit
  • Mounted Length:  12-3/8"
  • Compressed Length:  9-3/4"
  • Extended Length:  14-5/8" 
  • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

Coil-Over Mounting Guide (GIF)

Carrera Spring Rate Chart (GIF)

Coil-Over Illustration (Link)

Item Details

10" tall, 115 lb. spring
Carrera 2254B Street Rod Rear Coil Over Shock Kit, 140 lbs. Rate
(Part #2552254B)
                        

Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

Each kit includes:

  • (1) Chrome 1.63" steel body shock
  • (1) Chrome 10" spring
  • (1) Polished aluminum spring mounting kit
  • Mounted Length:  12-3/8"
  • Compressed Length:  9-3/4"
  • Extended Length:  14-5/8" 
  • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing
  • Lightweight chrome-silicon springs, guaranteed within 2% of rate and height

Coil-Over Mounting Guide (GIF)

Carrera Spring Rate Chart (GIF)

Coil-Over Illustration (Link)

Item Details

10" tall, 140 lb. spring
Carrera 2254C Street Rod Rear Coil Over Shock Kit, 165 lbs. Rate
(Part #2552254C)
                        

Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

Each kit includes:

  • (1) Chrome 1.63" steel body shock
  • (1) Chrome 10" spring
  • (1) Polished aluminum spring mounting kit
  • Mounted Length:  12-3/8"
  • Compressed Length:  9-3/4"
  • Extended Length:  14-5/8" 
  • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

Coil-Over Mounting Guide (GIF)

Carrera Spring Rate Chart (GIF)

Coil-Over Illustration (Link)

Item Details

10" tall, 165 lb. spring
Carrera 2254E Street Rod Rear Coil Over Shock Kit, 225 lbs. Rate
(Part #2552254E)
                        

Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

Each kit includes:

  • (1) Chrome 1.63" steel body shock
  • (1) Chrome 10" spring
  • (1) Polished aluminum spring mounting kit
  • Mounted Length:  12-3/8"
  • Compressed Length:  9-3/4"
  • Extended Length:  14-5/8" 
  • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

Coil-Over Mounting Guide (GIF)

Carrera Spring Rate Chart (GIF)

Coil-Over Illustration (Link)

Item Details

10" tall, 225 lb. spring
Carrera 2254F Street Rod Rear Coil Over Shock Kit, 275 lbs. Rate
(Part #2552254F)
                        

Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

Each kit includes:

  • (1) Chrome 1.63" steel body shock
  • (1) Chrome 10" spring
  • (1) Polished aluminum spring mounting kit
  • Mounted Length:  12-3/8"
  • Compressed Length:  9-3/4"
  • Extended Length:  14-5/8" 
  • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

Coil-Over Mounting Guide (GIF)

Carrera Spring Rate Chart (GIF)

Coil-Over Illustration (Link)

Item Details

10" tall, 275 lb. spring
Carrera 2254G Street rod Rear Coil Over Shock Kit,450 lbs. Rate
(Part #2552254G)
                        

Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

Each kit includes:

  • (1) Chrome 1.63" steel body shock
  • (1) Chrome 10" spring
  • (1) Polished aluminum spring mounting kit
  • Mounted Length:  12-3/8"
  • Compressed Length:  9-3/4"
  • Extended Length:  14-5/8" 
  • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

Coil-Over Mounting Guide (GIF)

Carrera Spring Rate Chart (GIF)

Coil-Over Illustration (Link)

Item Details

10" tall, 450 lb. spring
Coil-Over Spanner Wrench
(Part #91082155)
                        

This coilover adjustment tool allows for easy adjustment of ride height on your coil-over shocks. Cut from thick plate steel, this coilover adjustment wrench is built to withstand years of use. Spanner wrench will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits, which makes it a must have if you have coil-over shocks!

  • Adjustment of ride height on your coil-over shocks
  • Will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits

Note: To make easier use of these wrenches, it is recommended that spring pressure be relieved before adjusting. We also recommend using a coil-over bearing kit between your spring and adjuster nut for much easier movement.