Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Sold in Quantity:
Each
Finish:
Chrome
Extended Length:
11.53
Compressed Length:
8.43
Shock Type:
Twin Tube
Shock Eyelet Width:
.625
Hardware Included:
No
Bushing Material:
Steel
Body Diameter:
1.63
MFG. Part #:
7535
Adjustability:
Non-Adjustable
Valve Positions:
5 compression - 5 rebound
Upper Shock Mount:
1/2 Inch Eyelet
Lower Shock Mount:
1/2 Inch Eyelet
Shock Body Material:
Steel
Bolt Hole Circle:
.500
Coil-Over Compatible:
Yes
Garage Sale:
No
Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5
Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5

Click image to enlarge

Speeday Motors Logo
X
Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5

Details

Reviews

Q & A

What's in the Box

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

 

Item Details

Compression 5, Rebound 5

You may also be interested in:

Coilover Mounting Kit, 1.63 Inch Body
                        

For all Carrera coil over shocks with 1.63" O.D. body. Use with 2-1/2" I.D. springs.

  • Overall length of threaded sleeve is 4"
  • Length of threaded area is 3-3/8"
  • O.D. is nearly 2"
  • I.D. is nearly 1-11/16"

255-1951 Instructions (PDF)

Carrera 7543 Small Body Gas Cell Hyper Shock-4 In Stroke, Comp 3/Reb 3
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7551 Small Body Gas Cell Hyper Shock-5 In Stroke, Comp 1/Reb 1
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7553 Small Body Gas Cell Hyper Shock-5 In Stroke, Comp 3/Reb 3
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7554 Small Body Gas Cell Hyper Shock-5 In Stroke, Comp 4/Reb 4
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7561 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 1/Reb 1
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7562 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 2/Reb 2
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7563 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 3/Reb 3
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7572 Small Body Gas Cell Hyper Shock-7 In Stroke, Comp 2/Reb 2
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 5573 Pro Cell Hyper Shock, 7 Inch Stroke, Comp/Reb: 3/3
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade, no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving). Accepts coil-over mount kits shown on this page.

  • QA1 55 Series (previously Carrera Shocks 31 Series)
  • Compressed Length: 12.54"
  • Extended Length: 19.53"
  • 1-3/8" diameter piston
  • 9/16" hard chrome plated, polished piston rod
  • Twin Tube design
  • 2.00" O.D. steel body
  • Includes 1/2" bearing ends

Carrera Shock Application Chart (GIF)

Coil-Over Spanner Wrench
                        

This coilover adjustment tool allows for easy adjustment of ride height on your coil-over shocks. Cut from thick plate steel, this coilover adjustment wrench is built to withstand years of use. Spanner wrench will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits, which makes it a must have if you have coil-over shocks!

  • Adjustment of ride height on your coil-over shocks
  • Will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits

Note: To make easier use of these wrenches, it is recommended that spring pressure be relieved before adjusting. We also recommend using a coil-over bearing kit between your spring and adjuster nut for much easier movement.

 

Carrera Hyper Shock Bearing Ends, 5/8 Inch I.D.
                        Mid-to-heavyweight cars can destroy a rubber mount bushing in no time. Instead, use spherical bearings which don't compress and allow operation at far greater mounting angles. Works with all Carrera bearing end shocks (except 2254 shocks).
                    
Polished Billet Aluminum Coilover/Coil Over Shock Mount Support
                        

Speedway sells the ONLY fully engineered shock mount. The 5/8" forged button head bolt looks good while offering maximum support.  The 1-3/4" x 1-3/4" billet aluminum support spacer has internal threads. This allows you to properly support this shock without crushing the bushing like others do, which leads to shock failures. There's a reason major chassis builders use this mount.

  • Billet aluminum
  • 4-1/2" from base of head to end of threads
  • 1-1/4" shock mount base
  • Safely mounts to brackets 1/2" thick
  • Includes required washers and nylon lock nut
  • Mounts sold individually

916-36010 Instructions (PDF)