Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Sold in Quantity:
Each
Finish:
Chrome
Shock Type:
Twin Tube
Upper Shock Mount:
1/2 Inch Eyelet
Lower Shock Mount:
1/2 Inch Eyelet
Shock Body Material:
Steel
Bushing Material:
Steel
Shock Stroke:
3
Shock Body Type:
Smooth
Shock Body Size:
Small Body
MFG. Part #:
7535
Valve Positions:
5 compression - 5 rebound
Hardware Included:
No
Coil-Over Compatible:
Yes
Garage Sale:
No
Extended Length:
11.53
Compressed Length:
8.43
Shock Eyelet Width:
.625
Body Diameter:
1.63
Bolt Hole Circle:
.500
Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5
Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5
Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5
Carrera 7535 Small Body Gas Cell Hyper Shock-3 In Stroke, Comp 5/Reb 5

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

 

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

TN Turtle back T
Verified Purchaser
Verified Reviewer
Burns, TN

Good Quality Part

July 15, 2015
Wish I could have ordered with the 5/8" bearing ends rather than having to order seperately.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

3 questions : 3 answers

1 answers

Does this shock have 5/8 I.D. ? Wanting to use it with this item: http://www.speedwaymotors.com/1948-52-Ford-F1-Forged-Upper-Shock-Mounts-6-1-2-Inch,33278.html For my T-Bucket

Keith
Puyallup, WA
May 19, 2015

Does this shock have 5/8 I.D. ? Wanting to use it with this item: http://www.speedwaymotors.com/1948-52-Ford-F1-Forged-Upper-Shock-Mounts-6-1-2-Inch,33278.html For my T-Bucket

Answers

May 20, 2015
Zach
Expert
These shocks have 1/2" eyes on both ends
1 answers

Do they measure this shock at center of eye or end to end?

Exlaxracer
Wichita
July 27, 2015

Do they measure this shock at center of eye or end to end?

Answers

July 29, 2015
Zach
Expert
These are measured eye to eye
1 answers

Do they measure this shock at center of eye or end to end?

Exlaxracer
Wichita
July 28, 2015

Do they measure this shock at center of eye or end to end?

Answers

July 29, 2015
Zach
Expert
These are measured eye to eye
Page 1 of 1

You may also be interested in:

Coilover Mounting Kit, 1.63 Inch Body
(Part #2551951)
                        

For all Carrera coil over shocks with 1.63" O.D. body. Use with 2-1/2" I.D. springs.

  • Overall length of threaded sleeve is 4"
  • Length of threaded area is 3-3/8"
  • O.D. is nearly 2"
  • I.D. is nearly 1-11/16"

255-1951 Instructions (PDF)

Carrera 7543 Small Body Gas Cell Hyper Shock-4 In Stroke, Comp 3/Reb 3
(Part #2553243)
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7551 Small Body Gas Cell Hyper Shock-5 In Stroke, Comp 1/Reb 1
(Part #2553251)
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7553 Small Body Gas Cell Hyper Shock-5 In Stroke, Comp 3/Reb 3
(Part #2553253)
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7554 Small Body Gas Cell Hyper Shock-5 In Stroke, Comp 4/Reb 4
(Part #2553254)
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7561 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 1/Reb 1
(Part #2553361)
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7562 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 2/Reb 2
(Part #2553362)
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7563 Small Body Gas Cell Hyper Shock-6 In Stroke, Comp 3/Reb 3
(Part #2553363)
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 7572 Small Body Gas Cell Hyper Shock-7 In Stroke, Comp 2/Reb 2
(Part #2553372)
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving).

Shocks now include 1/2" bearing ends. Accepts coil-over mount kits shown on this page.

Hyper Shock Application Chart (GIF)

  • QA1 75 Series (Previously Carrera Shocks 32/33 Series)
  • 1-3/16" Piston
  • 1/2" Hard Chrome Plated, Polished Piston Rod
  • Twin Tube Design
  • 1-5/8" O.D. Chrome Plated Steel Body
  • Can Be Run Upside Down
  • 1/2" bearing ends

Coil-Over Illustration (GIF)

Carrera 5573 Pro Cell Hyper Shock, 7 Inch Stroke, Comp/Reb: 3/3
(Part #2553173)
                        

A gas cell Hypershock™ with a chrome plated steel body. This shock will not fade, no matter how long the race. It can be run in any position, including upside down. This is desireable because it reduces unsprung weight by having only the shaft move with the suspension (instead of the shaft standing still and the whole shock body moving). Accepts coil-over mount kits shown on this page.

  • QA1 55 Series (previously Carrera Shocks 31 Series)
  • Compressed Length: 12.54"
  • Extended Length: 19.53"
  • 1-3/8" diameter piston
  • 9/16" hard chrome plated, polished piston rod
  • Twin Tube design
  • 2.00" O.D. steel body
  • Includes 1/2" bearing ends

Carrera Shock Application Chart (GIF)

Coil-Over Spanner Wrench
(Part #91082155)
                        

This coilover adjustment tool allows for easy adjustment of ride height on your coil-over shocks. Cut from thick plate steel, this coilover adjustment wrench is built to withstand years of use. Spanner wrench will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits, which makes it a must have if you have coil-over shocks!

  • Adjustment of ride height on your coil-over shocks
  • Will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits

Note: To make easier use of these wrenches, it is recommended that spring pressure be relieved before adjusting. We also recommend using a coil-over bearing kit between your spring and adjuster nut for much easier movement.

 

Carrera Hyper Shock Bearing Ends, 5/8 Inch I.D.
(Part #2551818B)
                        Mid-to-heavyweight cars can destroy a rubber mount bushing in no time. Instead, use spherical bearings which don't compress and allow operation at far greater mounting angles. Works with all Carrera bearing end shocks (except 2254 shocks).
                    
Polished Billet Aluminum Coilover/Coil Over Shock Mount Support
(Part #91636010-POL)
                        

Speedway sells the ONLY fully engineered shock mount. The 5/8" forged button head bolt looks good while offering maximum support.  The 1-3/4" x 1-3/4" billet aluminum support spacer has internal threads. This allows you to properly support this shock without crushing the bushing like others do, which leads to shock failures. There's a reason major chassis builders use this mount.

  • Billet aluminum
  • 4-1/2" from base of head to end of threads
  • 1-1/4" shock mount base
  • Safely mounts to brackets 1/2" thick
  • Includes required washers and nylon lock nut
  • Mounts sold individually

916-36010 Instructions (PDF)